Top Emergency Electricians in Levittown, PA,  19030  | Compare & Call

Flickering during storms points to grid-level issues, likely related to the moderate surge risk from our seasonal thunderstorms affecting PECO's overhead lines. However, modern smart electronics are highly sensitive to even minor voltage fluctuations. While the utility issue is the trigger, the solution lies in your home's infrastructure. Installing whole-house surge protection at your service entrance will shield your electronics, and ensuring your panel's grounding electrodes are properly bonded provides a critical safety path for any stray voltage.

All panel upgrades require a permit from the Falls Township Code Enforcement Department and a final inspection. As a master electrician licensed by the Pennsylvania Department of Labor and Industry, I handle this process. The work must comply with the current NEC 2023, which mandates AFCI protection for most living-area circuits and specific rules for service equipment. This isn't just red tape; these codes are updated based on real-world fire and shock prevention data. Using a licensed professional ensures the upgrade is documented, safe, and adds value to your home.

For winter storms, ensure your heating system's circuit is protected by a properly rated AFCI/GFCI breaker, and consider a hardwired generator with a transfer switch for essential circuits. Summer brownouts, driven by peak AC demand, strain an already aging 60-amp service. Beyond a service upgrade, installing a monitored whole-house surge protector is key, as brownouts are often followed by damaging power surges when grid power is restored. These steps move you from reactive to prepared.

The flat, often damp soil of our coastal plain actually provides excellent conductivity for your grounding electrode system, which is a safety benefit. The primary terrain-related concern here is the extensive tree canopy common in these older neighborhoods. During high winds or ice storms, tree limbs can fall on overhead service drops, causing outages. It's wise to keep trees trimmed back from the overhead line feeding your house mast. We also recommend verifying that your ground rods are not corroded, as the moisture in the soil can accelerate wear over decades.

Your electrical system is now 70 years old, which is a significant age for wiring. The cloth-jacketed copper wiring from that era was designed for a handful of lights and a few small appliances, not the simultaneous high-wattage loads of a modern 2026 household. A 60-amp panel, common for Falls Township homes of that vintage, simply lacks the capacity to safely run multiple high-demand appliances like a microwave and an AC unit without causing voltage drop, which manifests as dimming lights. This is a clear sign your system is overloaded.

Overhead service masts, standard for 1950s construction here, have specific vulnerabilities. The mast itself can loosen or corrode where it enters the roof, creating a water intrusion point. The service drop wires from the pole can sag over time or be damaged by tree limbs. During any roof work or gutter installation, it's crucial to avoid contacting these lines. If you're considering a service upgrade, the existing mast must be evaluated to ensure it can physically support the new, larger service cables required for a 200-amp panel.

For an emergency like a burning smell, which indicates a potential fire hazard, we prioritize immediate dispatch. From our starting point near the Levittown Town Center, we can typically be on-site in Falls Township within 10 to 15 minutes via I-95. Our first action will be to safely isolate the problem at your panel or service entrance to prevent further damage or risk. Please consider turning off the main breaker if it is safe to do so while you wait.

No, this combination presents a serious safety barrier. Federal Pacific panels are a known fire hazard due to faulty breakers that can fail to trip during an overload. Pairing that with an undersized 60-amp service means your system cannot handle the additional 30-50 amp circuit a Level 2 EV charger or heat pump requires. Installing either would first require a full panel replacement with a modern, UL-listed panel and a service upgrade to at least 200 amps to provide the necessary capacity and safety.