Top Emergency Electricians in Tujunga, CA, 91042 | Compare & Call
Kyle Electric
Coleman's Custom Electrical, A/C & Plumbing
GS SOLAR ELECTRIC
FAQs
My smart lights and TV keep flickering. Is this a problem with my house or LADWP's grid?
Flickering often starts in the home, especially with 70-year-old wiring and connections that can't handle stable current flow. While LADWP provides reliable power with low lightning-related surge risk in our area, internal issues are more likely. We first diagnose your service entrance, main panel connections, and branch circuit integrity. Whole-house surge protection is still recommended to shield sensitive electronics from any minor grid fluctuations.
What permits and codes apply if I need to upgrade my electrical panel in Los Angeles?
All panel upgrades require a permit from the Los Angeles Department of Building and Safety and must comply with the 2023 NEC. The work must be performed by a contractor licensed by the CSLB. This process ensures your new service is inspected for safety, properly grounded, and includes required AFCI breakers for living areas. As the expert on site, I manage the entire permit and inspection workflow.
My Tujunga Hills home still has its original 1956 cloth wiring. Why do my lights dim when I run the microwave and window AC at the same time?
Homes in Tujunga Hills with 70-year-old cloth-jacketed copper wiring were not designed for the simultaneous loads of modern 2026 appliances. The original 100-amp service and wiring lack the capacity for multiple high-draw devices. This causes voltage drop, seen as dimming lights, and creates a fire risk from overheating conductors. Upgrading the panel and replacing the aging circuits resolves this safety hazard.
I have an old Federal Pacific panel and want to install a Level 2 EV charger. Is my 100-amp service from 1956 enough?
No, your current setup presents two critical barriers. First, Federal Pacific panels are a known fire hazard and should be replaced immediately. Second, a 1956-era 100-amp service lacks the capacity for a Level 2 EV charger or a modern heat pump. A full service upgrade to 200 amps is the necessary first step to safely add these high-demand systems and bring your home to current code.
How can I prepare my Tujunga home's electrical system for summer brownouts and occasional winter ice storms?
For summer peaks, ensure your air conditioning circuit is dedicated and on a properly sized breaker. A professional load calculation can identify if your 100-amp panel is at capacity. For winter storms, consider a hardwired standby generator with an automatic transfer switch. This provides backup power safely, as portable generators require meticulous setup to avoid backfeeding the grid and endangering utility workers.
The power just went out and I smell something burning near my electrical panel. How fast can a Master Electrician get to me?
For a burning smell, we treat it as an emergency and dispatch immediately. From the McGroarty Arts Center, we can be on CA-210 and at most Tujunga Hills addresses within 8-12 minutes. The priority is to safely de-energize the affected circuit and inspect the panel, bus bars, and connections for the source of overheating to prevent an electrical fire.
My overhead service mast looks old and the wires are sagging. What's involved in fixing or replacing it?
An aging overhead mast and service drop are common here. Replacement involves coordinating a temporary power disconnect with LADWP, installing a new, code-compliant mast and weatherhead, and having the utility reconnect. We handle the permit with LA Building and Safety and ensure the mast height and clearance over roofs and driveways meet current requirements for safety and reliability.
We live on a rocky hillside near the arts center. Could that be affecting our home's electrical grounding?
Yes, rocky soil common in the Tujunga foothills presents a high-resistance challenge for grounding electrode systems. Proper grounding is non-negotiable for safety and surge dissipation. We often need to drive multiple grounding rods or use specialized plates to achieve the low-resistance path required by code. An inadequate ground can lead to erratic appliance operation and increased shock risk during a fault.