Top Emergency Electricians in Chatsworth, CA, 91311 | Compare & Call

There are 227 electrician companies server in Chatsworth CA

Angel Electric

Angel Electric

★★★★★ 5.0 / 5 (18)
12563 Cometa Ave, Sylmar CA 91340
Electricians

Angel Electric is a licensed and bonded electrical service company that has been reliably serving Sylmar and the greater San Fernando Valley since 2002. Founded by Jose Moreno, the business operates o...

Star Light Electric

Star Light Electric

★★★★★ 5.0 / 5 (20)
7655 Winnetka Ave Ste 2087, Winnetka CA 91306
Electricians

For two decades, Star Light Electric has been the trusted electrical service for Winnetka homeowners and businesses. As a locally owned and operated company, I understand the specific electrical needs...

Power Solutions

Power Solutions

★★★★★ 5.0 / 5 (1)
22121 Clarendon Street, Apt. 338, Woodland Hills CA 91367
Electricians, Lighting Fixtures & Equipment

Founded by a dedicated electrician who began his career in 2016, Power Solutions is a Woodland Hills company built on a passion for the trade. The journey to becoming a C10 licensed contractor was mar...

Most Valuable Plumber

Most Valuable Plumber

★★★★☆ 4.4 / 5 (176)
20338 Corisco St, Chatsworth CA 91311
Plumbing, Water Heater Installation/Repair, Electricians

Founded in 2014, Most Valuable Plumber is a family-owned and operated business serving Chatsworth and the greater Los Angeles, Orange, and Ventura County areas. Our mission is to provide the highest q...

Velmor Construction

Velmor Construction

★★★★★ 5.0 / 5 (3)
Reseda CA 91335
General Contractors, Electricians, Plumbing

Velmor Construction is a Reseda-based general contractor and licensed electrician/plumber, serving the San Fernando Valley with comprehensive home improvement and repair services. We help local homeow...

Nat Electric

Nat Electric

★★★★★ 5.0 / 5 (1)
Granada Hills CA 91344
Electricians

For over 23 years, Nat Electric has been the trusted local electrician for Granada Hills homes and businesses. We are a licensed and insured team committed to providing safe, reliable electrical solut...

Spark Electrical Service

Spark Electrical Service

★★★★★ 4.6 / 5 (11)
22845 Ventura Blvd Ste 26, Woodland Hills CA 91364
Electricians

Spark Electrical Service is a locally owned and operated electrical contractor serving Woodland Hills, CA, and the greater Los Angeles area. With over 20 years of experience, we specialize in both res...

Eagle Electric

Eagle Electric

★★★★★ 5.0 / 5 (5)
Los Angeles CA 91335
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Eagle Electric is a third-generation, owner-operated electrical contracting company rooted in deep professional expertise. The owner, a dedicated and well-mannered English tradesman, brought his exper...

Dawg Sparky

Dawg Sparky

★★★★★ 5.0 / 5 (3)
San Fernando Valley CA 91335
Electricians

Dawg Sparky is a trusted local electrical service provider serving the San Fernando Valley, CA, with comprehensive solutions for residential and commercial needs. We specialize in a wide range of serv...

Kennedy Electric

Kennedy Electric

★★★★★ 4.9 / 5 (29)
21801 Roscoe Blvd, Canoga Park CA 91304
Electricians

Kennedy Electric is a licensed and established electrical service based in Canoga Park, serving the community since 1992. With over 25 years of hands-on experience gained in the US, Canada, and even t...



Estimated Electrical Service Costs in Chatsworth, CA

Emergency After-Hours CallEstimated Range
$334 - $449
Electrical Safety InspectionEstimated Range
$149 - $204
EV Charger InstallationEstimated Range
$979 - $1,314
Panel Upgrade (200 Amp)Estimated Range
$3,314 - $4,424
Ceiling Fan InstallationEstimated Range
$294 - $394

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Chatsworth. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

My power comes from an overhead line to a mast on my roof. What are the common maintenance issues I should watch for?

Overhead service masts, common in Chatsworth Lake Manor, are exposed to the elements. Regularly inspect where the mast enters your roof for cracks in the weatherhead sealant, which can lead to water intrusion into your panel. Also, look for sagging or frayed service drop cables from the utility pole. Tree limbs contacting these lines are a fire risk and cause interference. Any work on the mast or service entrance cables requires a permit from LADBS and coordination with LADWP for a temporary disconnect.

I have an old 100-amp Federal Pacific panel. Can I safely add a Level 2 EV charger or a new heat pump to my house?

No, it is not safe to add those major loads to that specific setup. A Federal Pacific panel is a known fire hazard due to breakers that can fail to trip during an overload. Furthermore, a 100-amp service from 1971 lacks the capacity for a 40-50 amp EV charger or a heat pump's dedicated circuit. The required upgrade involves replacing the hazardous panel with a modern, code-compliant unit and likely increasing your service entrance capacity to 200 amps.

We live on a rocky hillside near Stoney Point. Could that be affecting our home's electrical grounding?

Absolutely. Rocky, dry soil presents a high-resistance path to ground, which can compromise your grounding electrode system. This is critical for surge protection and safety—fault current needs a low-resistance path to earth. We often need to drive additional ground rods or install a concrete-encased electrode (Ufer ground) to achieve the NEC-required 25-ohm resistance. Proper grounding is especially important in hillside areas where lightning-induced surges can travel along the terrain.

My power is completely out and I smell burning from my panel. How fast can an electrician get to my home near Stoney Point Park?

For a burning smell, we treat it as a potential fire hazard and dispatch immediately. From our staging area near Stoney Point, we use SR-118 for the fastest route, typically arriving within your 8-12 minute window. The first step is to safely de-energize the affected area at your main disconnect to prevent an arc flash. We then perform a thermal scan and physical inspection of the panel and breakers to locate the source of the overheating.

What permits and codes are involved if I need to replace my electrical panel in Los Angeles?

Panel replacement requires a detailed electrical permit from the Los Angeles Department of Building and Safety (LADBS). The installation must fully comply with the 2023 California Electrical Code, which mandates AFCI protection for most living areas and specific working clearances around the panel. As a CSLB-licensed electrical contractor, I handle the permit application, scheduling inspections, and providing the final certification. This process ensures the work is documented for home insurance and future sales, and most importantly, that it meets current safety standards.

My smart home devices keep resetting. Is this a problem with LADWP's power quality or something in my house?

While LADWP provides stable power, minor grid fluctuations are common. Sensitive electronics like smart home hubs and computers are vulnerable to these micro-surges. Our low lightning risk in Chatsworth means major surges are rare, but daily utility switching can cause issues. The problem often originates inside your home; an outdated panel with poor connections or a lack of whole-house surge protection at the main panel allows these disturbances to damage equipment. Installing a Type 1 or Type 2 surge protective device is a standard recommendation.

My Chatsworth Lake Manor home was built in 1971. Why do my lights dim when the air conditioner and microwave are on at the same time?

Your home's electrical system is now 55 years old, designed for the demands of 1971. The original NM-B Romex wiring and 100-amp service panel were not intended for today's high-draw appliances, such as modern air conditioners, induction cooktops, and multiple large-screen TVs. This leads to voltage drop, causing lights to dim and putting stress on the entire system. Upgrading the service panel and evaluating branch circuit capacity is often the necessary solution for safety and reliability.

How should I prepare my home's electrical system for summer brownouts and the occasional winter freeze?

For summer peaks, ensure your air conditioning condenser's electrical disconnect and wiring are in good condition, as brownouts strain motors. Consider a hard-wired generator interlock kit for essential circuits during extended outages. Winter preparation focuses on protecting outdoor receptacles and irrigation system wiring from our occasional sub-40°F temperatures with proper GFCI protection and in-use covers. A whole-house surge protector also safeguards electronics from voltage spikes when grid power is restored after any outage.

Scroll to Top
CALL US NOW