Top Emergency Electricians in Chatsworth, CA, 91311 | Compare & Call

There are 227 electrician companies server in Chatsworth CA

A Lighting

A Lighting

★★★★★ 4.9 / 5 (69)
14559 Bledsoe St, Sylmar CA 91342
Electricians, Lighting Fixtures & Equipment, Security Systems

A Lighting Inc. is a Sylmar-based electrical contracting company established in 2008 by Adam Levy. With over a decade of experience, Adam's background combines military and general construction expert...

AC Kings Energy Efficient Heating & Air

AC Kings Energy Efficient Heating & Air

★★★★★ 5.0 / 5 (40)
Mission Hills CA 91345
Heating & Air Conditioning/HVAC, Electricians

AC Kings Energy Efficient Heating & Air is a veteran-owned HVAC and electrical service company based in Mission Hills, CA, serving residential and commercial clients throughout the San Fernando Valley...

Cali Energy

Cali Energy

★★★★★ 5.0 / 5 (21)
19201 Parthenia St Ste E, Northridge CA 91324
Solar Installation, Electricians, Roofing

Cali Energy is a family-owned and operated contractor based in Northridge, CA, holding the essential C10 electrical, B general, and C39 roofing licenses. This unique combination allows us to manage yo...

Mark Bangert Electric

Mark Bangert Electric

★★★★★ 5.0 / 5 (24)
5814 Lasaine Ave, Encino CA 91316
Electricians

Mark Bangert Electric is a trusted, locally-owned electrical service provider serving Encino and the surrounding communities. As a fully licensed and insured electrician, Mark brings a straightforward...

SHS Electrical

SHS Electrical

★★★★★ 5.0 / 5 (3)
16739 Vanowen St, Los Angeles CA 91406
Electricians, Lighting Fixtures & Equipment

SHS Electrical is a trusted local provider serving the Greater Los Angeles County and San Fernando Valley. We offer a comprehensive range of electrical services for both residential and commercial pro...

Nexus Electric

Nexus Electric

★★★★★ 4.9 / 5 (63)
19532 Lanark St, Reseda CA 91335
Electricians, Lighting Fixtures & Equipment

Nexus Electric has been a trusted local electrical service provider in Reseda for over a decade. We are committed to honest, reliable service for both homes and businesses, offering 24/7 emergency sup...

WealFull

WealFull

★★★★★ 4.8 / 5 (38)
8061 White Oak Ave, Reseda CA 91335
General Contractors, Drywall Installation & Repair, Stucco Services

WealFull is a licensed and bonded home remodeling and handyman service based in Reseda, CA. Founded and led by Artem A, a B Contractor with over 8 years of dedicated experience, our team brings a weal...

EL Electric

EL Electric

★★★★★ 4.7 / 5 (28)
5567 Reseda Blvd Ste 202, Tarzana CA 91356
Electricians, Lighting Fixtures & Equipment, Security Systems

EL Electric is a family-owned electrical service provider serving Tarzana and surrounding communities for over 30 years. Specializing in residential and commercial projects, they handle everything fro...

Boulevard Electric Supply

Boulevard Electric Supply

★★★★★ 4.8 / 5 (29)
22726 Ventura Blvd, Woodland Hills CA 91364
Electronics, Lighting Fixtures & Equipment, Electricians

Boulevard Electric Supply is a trusted local source for electrical and lighting products in Woodland Hills, CA. Operating for years, our team provides personalized, expert guidance to help homeowners,...

Caliber Electric

Caliber Electric

★★★★★ 5.0 / 5 (145)
23705 Vanowen St, West hills CA 91307
Electricians, Lighting Fixtures & Equipment

Caliber Electric is a locally owned and trusted electrical contractor serving West Hills and Southern California since 1991. Our team of licensed electricians is dedicated to providing reliable, punct...



Estimated Electrical Service Costs in Chatsworth, CA

Emergency After-Hours CallEstimated Range
$334 - $449
Electrical Safety InspectionEstimated Range
$149 - $204
EV Charger InstallationEstimated Range
$979 - $1,314
Panel Upgrade (200 Amp)Estimated Range
$3,314 - $4,424
Ceiling Fan InstallationEstimated Range
$294 - $394

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Chatsworth. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

My power comes from an overhead line to a mast on my roof. What are the common maintenance issues I should watch for?

Overhead service masts, common in Chatsworth Lake Manor, are exposed to the elements. Regularly inspect where the mast enters your roof for cracks in the weatherhead sealant, which can lead to water intrusion into your panel. Also, look for sagging or frayed service drop cables from the utility pole. Tree limbs contacting these lines are a fire risk and cause interference. Any work on the mast or service entrance cables requires a permit from LADBS and coordination with LADWP for a temporary disconnect.

I have an old 100-amp Federal Pacific panel. Can I safely add a Level 2 EV charger or a new heat pump to my house?

No, it is not safe to add those major loads to that specific setup. A Federal Pacific panel is a known fire hazard due to breakers that can fail to trip during an overload. Furthermore, a 100-amp service from 1971 lacks the capacity for a 40-50 amp EV charger or a heat pump's dedicated circuit. The required upgrade involves replacing the hazardous panel with a modern, code-compliant unit and likely increasing your service entrance capacity to 200 amps.

We live on a rocky hillside near Stoney Point. Could that be affecting our home's electrical grounding?

Absolutely. Rocky, dry soil presents a high-resistance path to ground, which can compromise your grounding electrode system. This is critical for surge protection and safety—fault current needs a low-resistance path to earth. We often need to drive additional ground rods or install a concrete-encased electrode (Ufer ground) to achieve the NEC-required 25-ohm resistance. Proper grounding is especially important in hillside areas where lightning-induced surges can travel along the terrain.

My power is completely out and I smell burning from my panel. How fast can an electrician get to my home near Stoney Point Park?

For a burning smell, we treat it as a potential fire hazard and dispatch immediately. From our staging area near Stoney Point, we use SR-118 for the fastest route, typically arriving within your 8-12 minute window. The first step is to safely de-energize the affected area at your main disconnect to prevent an arc flash. We then perform a thermal scan and physical inspection of the panel and breakers to locate the source of the overheating.

What permits and codes are involved if I need to replace my electrical panel in Los Angeles?

Panel replacement requires a detailed electrical permit from the Los Angeles Department of Building and Safety (LADBS). The installation must fully comply with the 2023 California Electrical Code, which mandates AFCI protection for most living areas and specific working clearances around the panel. As a CSLB-licensed electrical contractor, I handle the permit application, scheduling inspections, and providing the final certification. This process ensures the work is documented for home insurance and future sales, and most importantly, that it meets current safety standards.

My smart home devices keep resetting. Is this a problem with LADWP's power quality or something in my house?

While LADWP provides stable power, minor grid fluctuations are common. Sensitive electronics like smart home hubs and computers are vulnerable to these micro-surges. Our low lightning risk in Chatsworth means major surges are rare, but daily utility switching can cause issues. The problem often originates inside your home; an outdated panel with poor connections or a lack of whole-house surge protection at the main panel allows these disturbances to damage equipment. Installing a Type 1 or Type 2 surge protective device is a standard recommendation.

My Chatsworth Lake Manor home was built in 1971. Why do my lights dim when the air conditioner and microwave are on at the same time?

Your home's electrical system is now 55 years old, designed for the demands of 1971. The original NM-B Romex wiring and 100-amp service panel were not intended for today's high-draw appliances, such as modern air conditioners, induction cooktops, and multiple large-screen TVs. This leads to voltage drop, causing lights to dim and putting stress on the entire system. Upgrading the service panel and evaluating branch circuit capacity is often the necessary solution for safety and reliability.

How should I prepare my home's electrical system for summer brownouts and the occasional winter freeze?

For summer peaks, ensure your air conditioning condenser's electrical disconnect and wiring are in good condition, as brownouts strain motors. Consider a hard-wired generator interlock kit for essential circuits during extended outages. Winter preparation focuses on protecting outdoor receptacles and irrigation system wiring from our occasional sub-40°F temperatures with proper GFCI protection and in-use covers. A whole-house surge protector also safeguards electronics from voltage spikes when grid power is restored after any outage.

Scroll to Top
CALL US NOW