Top Emergency Electricians in Kemmerer, WY, 83101 | Compare & Call

The utility, Rocky Mountain Power, owns and maintains the lines up to and including the connection point at your service mast head. You, the homeowner, are responsible for the mast assembly, the meter base, and all wiring from there into your panel. If the mast is bent or the weatherhead is damaged, that is a repair we handle. Never attempt to work on or near the utility-owned drop line yourself.

For an urgent safety call like that, our dispatch prioritizes you immediately. From a start point near the Fossil Country Frontier Museum, we're typically on US-189 and at your City Center address within 5 minutes. A burning odor indicates active failure, so our first move is to safely isolate the problem at your meter to prevent fire spread before diagnosing the panel or wiring.

Winter heating surges strain the entire grid. First, ensure your heating system is serviced and its dedicated circuit is sound. For brownouts, consider a hardwired backup generator with a proper transfer switch—portable units are risky and must never be connected to your panel without an interlock. Given the age of many systems here, having an electrician verify your service mast, meter base, and main connections are tight and corrosion-free is critical before peak season.

It could be both. Rocky Mountain Power manages a grid with moderate surge risk from seasonal lightning and switching events, which can send spikes into your home. However, if your wiring and grounding are old or faulty, those surges have no proper path to earth. Modern electronics are sensitive to this 'dirty power.' A professional can install whole-house surge protection at your service entrance and verify your home's grounding system is intact.

All major work requires a permit from the Lincoln County Planning and Building Department and a final inspection. Wyoming follows the 2023 National Electrical Code (NEC), which mandates AFCI protection for most living areas and specific rules for service upgrades. As a Master Electrician licensed with the Wyoming Department of Fire Prevention and Electrical Safety, I pull the permits, ensure the work meets all current code, and coordinate the inspection, handling that red tape for you.

Your home's electrical system is over 50 years old, with original NM-B Romex wiring designed for a much simpler load. A standard 1970s kitchen circuit simply isn't rated for the combined startup surge of modern, high-draw appliances. The 100-amp service panel, common for that era, is now at capacity with today's array of electronics, computers, and kitchen gadgets. This dimming is a clear sign the system is struggling.

No, it is not safe. Federal Pacific panels are a known fire hazard due to breakers that can fail to trip during an overload. Your existing 100-amp service is also insufficient for adding a major load like a heat pump or Level 2 EV charger. The project requires a full panel replacement with a modern, code-compliant unit and likely a service upgrade to 200 amps. We must address the safety defect first.

Yes, it can. Rocky, dry soil has high electrical resistance, making it harder to establish a reliable ground. The National Electrical Code requires grounding electrodes to reach moist earth, which often means driving rods deeper or using multiple rods. A poor ground won't safely shunt surges or faults, leaving your system and appliances vulnerable. Testing ground resistance is a standard part of our safety inspection for homes in this area.