Top Emergency Electricians in Lima, WI, 53070 | Compare & Call

There are 73 electrician companies server in Lima WI

Z-Mac Electric

Z-Mac Electric

Brown Deer WI 53223
Electricians

Z-Mac Electric is a family-owned and operated electrical service proudly serving Brown Deer, Wisconsin. Founded by a Master Electrician with over 23 years of experience, our journey began in Texas whe...

Prom Electric

Prom Electric

Cedar Grove WI 53013
Electricians, Lighting Fixtures & Equipment

Prom Electric is a trusted local electrical service provider serving Cedar Grove, WI, and surrounding areas. Specializing in comprehensive electrical solutions, we help homeowners address common local...

Rock Solid Solutions

Rock Solid Solutions

Plymouth WI 53073
Electricians, Carpenters, Generator Installation/Repair

Rock Solid Solutions is your trusted local contractor in Plymouth, WI, specializing in electrical and carpentry services to keep your home safe and functional. We understand the common problems Plymou...

Adept Pro Services

Adept Pro Services

Hartford WI 53027
Handyman, Appliances & Repair, Electricians

Adept Pro Services is a family-owned residential maintenance company serving Hartford, WI, and surrounding areas. We specialize in handyman services, appliance repair, and electrical work, offering a ...

Schweitzer Electric

Schweitzer Electric

★★★★★ 4.5 / 5 (8)
Allenton WI 53002
Electricians, Generator Installation/Repair, Lighting Fixtures & Equipment

Schweitzer Electric is a licensed electrical contractor based in Allenton, WI, proudly serving the broader Southeastern Wisconsin community since 2010. Owned and operated by Adam Schweitzer, the compa...

Stellmacher Electric

Stellmacher Electric

5022 State Hwy 144, Hartford WI 53027
Electricians

Stellmacher Electric is a trusted, locally-owned electrical contractor serving Hartford, WI, and the surrounding communities. Owned and operated by a licensed and insured master electrician with over ...

Hein Electric Supply Company

Hein Electric Supply Company

225 Wisconsin St, West Bend WI 53095
Electricians, General Contractors

Hein Electric Supply Company is a locally-owned electrical parts distributor in West Bend, WI, serving electricians and contractors across Southeastern Wisconsin. We specialize in providing a flexible...

Wisconsin Home Services

Wisconsin Home Services

Hartford WI 53027
Painters, General Contractors, Electricians

Wisconsin Home Services is a family-owned Hartford business built on a foundation of hands-on craftsmanship and local understanding. Founded by an owner who grew up learning from his father and later ...

Switch Electric

Switch Electric

★★★★★ 5.0 / 5 (1)
Appleton WI 54915
Electricians

Switch Electric is a family-owned and operated electrical business in Appleton, WI, built on over 25 years of combined experience. Founded by a father and his two sons, the company was born from a sha...

CR Fochs Electrical Contractors

CR Fochs Electrical Contractors

★★★★★ 5.0 / 5 (5)
2770 Towne Ct, Neenah WI 54956
Electricians

CR Fochs Electrical Contractors is a family-owned and operated business based in Neenah, WI, with over 25 years of experience serving Northeast Wisconsin. Founded on the principle of delivering clean,...



Estimated Electrical Service Costs in Lima, WI

Emergency After-Hours CallEstimated Range
$304 - $409
Electrical Safety InspectionEstimated Range
$134 - $184
EV Charger InstallationEstimated Range
$894 - $1,199
Panel Upgrade (200 Amp)Estimated Range
$3,019 - $4,034
Ceiling Fan InstallationEstimated Range
$264 - $359

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Lima. Prices include standard parts and labor adjusted for 2026 economic projections.

Frequently Asked Questions

My power comes in on an overhead mast to my farmhouse. What are the common failure points I should watch for?

Overhead service in a rural setting like yours has specific vulnerabilities. The masthead where the utility lines connect is exposed to wind, ice, and wildlife. Inspect for corrosion or loose connections there. The service drop cable itself can sag or be damaged by tree limbs. The conduit (mast) where it enters your house must be securely anchored; a loose mast can strain the wires inside. These are all points we check during a routine safety inspection to prevent unexpected outages.

I heard Federal Pacific panels are dangerous. I have one and want to add a heat pump. Is my 100-amp service even enough?

You are correct to be concerned. Federal Pacific panels have a known failure rate and are not considered safe for continued use. Regarding capacity, a 1974-era 100-amp service is typically insufficient for adding a heat pump or a Level 2 EV charger. Both require significant amperage. The necessary first step is a full service upgrade to at least 200 amps, which also requires replacing the hazardous Federal Pacific panel with a modern, UL-listed panel and breakers.

How should I prepare my home's electrical system for a Rock County ice storm and the winter heating surge?

Winter preparedness focuses on reliability and surge protection. Before the deep cold hits, have an electrician verify your service mast, meter base, and panel connections are tight; thermal cycling can loosen them. For the inevitable heating surge, ensure your furnace circuit is dedicated and not overloaded. Consider a hardwired backup generator with a proper transfer switch. A whole-house surge protector is also critical, as power restoration after an outage often comes with damaging voltage spikes.

I want to upgrade my electrical panel. What permits are needed from Rock County, and do I need a licensed electrician?

Any service upgrade or panel replacement requires a permit from the Rock County Planning, Economic & Community Development Department. The work must comply with the current NEC 2023 code. In Wisconsin, this work absolutely must be performed by a master or journeyman electrician licensed by the Department of Safety and Professional Services (DSPS). We handle pulling the permit, scheduling the required inspections, and providing you with the documentation for your records, ensuring the job is legal, safe, and insurable.

Our Lima Center home still has its original 1974 wiring. Why does the power dip when we run the microwave and the dishwasher at the same time?

Homes built in the 1970s were designed for a different era of electricity consumption. Your original NM-B Romex wiring is over 50 years old now, and while the insulation may be intact, the entire system was sized for far fewer and less powerful appliances. Modern refrigerators, air fryers, and entertainment systems create a cumulative load that a 100-amp panel from 1974 wasn't engineered to handle safely, leading to voltage drops and tripped breakers.

My power is completely out and I smell something burning near my panel. How quickly can an electrician get to my house near the Lima Town Hall?

For an emergency like that, we prioritize immediate dispatch. From the Lima Town Hall, we can typically be on WI-59 and at your property within 5 to 8 minutes. A burning smell indicates an active fault that requires urgent attention to prevent a fire. Please shut off the main breaker if it's safe to do so and keep everyone clear of the panel until we arrive.

My lights in Lima flicker during thunderstorms. Is this a problem with We Energies or something in my house?

Flickering during storms is often a grid issue caused by wind affecting overhead lines, but it can also expose weaknesses in your home's electrical system. We Energies manages the supply, but the moderate surge risk from our seasonal thunderstorms means transient voltage spikes are entering your home. These spikes can degrade sensitive electronics over time. Installing a whole-house surge protector at your service panel is the most effective defense, acting as a first line of protection for all your circuits.

We're on rolling farmland outside Lima Center. Could the soil type affect my home's electrical grounding?

Yes, terrain directly impacts grounding effectiveness. The rocky and variable soil common in our rolling farmland can have high resistance, making it difficult to establish a reliable ground for your system. A proper ground is non-negotiable for safety and surge dissipation. We often need to drive additional grounding rods or use a ground ring to achieve the low-resistance path required by the National Electrical Code. This is a standard part of any service upgrade or panel replacement we perform in the area.

Scroll to Top
CALL US NOW