Top Emergency Electricians in Genesee, WI, 53018 | Compare & Call

There are 195 electrician companies server in Genesee WI

Seider Heating, Plumbing & Electrical

Seider Heating, Plumbing & Electrical

★★★☆☆ 3.0 / 5 (25)
N22W22967 Nancys Ct Ste A, Waukesha WI 53186
Heating & Air Conditioning/HVAC, Plumbing, Electricians

Seider Heating, Plumbing & Electrical is a fourth-generation family-owned business serving Waukesha and southeast Wisconsin since 1912. Originally founded as Pergande & Seider Hardware in Milwaukee by...

Nelco Electric

Nelco Electric

★★★★★ 5.0 / 5 (2)
N115 W19395 Edison Dr, Germantown WI 53022
Electricians

Since 2003, Nelco Electric has been a trusted, employee-owned electrical contractor serving Germantown and southeastern Wisconsin. Founded as a two-person team, the company has grown to a team of appr...

Lemke Electric

Lemke Electric

★★★★☆ 3.7 / 5 (3)
Mequon WI 53097
Electricians

Lemke Electric is a trusted, local electrical service provider serving homeowners in Mequon, WI. We specialize in thorough electrical inspections, a critical service for the community's mix of classic...

CJM Lighting & Electrical

CJM Lighting & Electrical

★★★★★ 5.0 / 5 (1)
20316 W Main St, Lannon WI 53046
Electricians, Lighting Fixtures & Equipment

CJM Lighting & Electrical in Lannon, WI, is a certified Focus on Energy Trade Ally with over two decades of experience. We specialize in designing and installing energy-efficient lighting systems for ...

Illuminator’s Electric

Illuminator’s Electric

Milwaukee WI 53223
Electricians

Illuminator’s Electric, founded by a Milwaukee electrician with roots in the trade since 2013, brings over a decade of hands-on experience to every home. Officially established in 2021 after years of ...

Midwest Energy Solutions

Midwest Energy Solutions

★★★★★ 5.0 / 5 (1)
Pewaukee WI 53072
Electricians, Solar Installation

Midwest Energy Solutions is a Pewaukee-based electrical and solar contracting company dedicated to protecting local homes and businesses. We understand the common electrical challenges in our area, su...

Patriot Pro

Patriot Pro

★★★★★ 5.0 / 5 (1)
Palmyra WI 53156
Heating & Air Conditioning/HVAC, Electricians, Plumbing

Patriot Pro, owned and operated by local veteran Brett, is your trusted home service partner in Palmyra, WI. We combine the principles of integrity and dedicated service with a straightforward approac...

Hardwired Electric

Hardwired Electric

★★★★★ 5.0 / 5 (1)
Oconomowoc WI 53066
Electricians

Hardwired Electric is a licensed electrical contractor serving Oconomowoc and the Lake Country area. With over 22 years of combined experience and more than seven years in business locally, we special...

Electric Company

Electric Company

6714 W Fairview Ave, Wauwatosa WI 53213
Electricians

The Electric Company is your trusted, licensed, and bonded electrical partner in Wauwatosa and throughout Milwaukee County. With a combined experience of over 50 years, our team provides reliable elec...

JM Electrical Contractors

JM Electrical Contractors

★★★☆☆ 3.0 / 5 (2)
Waukesha WI 53189
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

JM Electrical Contractors is a trusted, locally-owned electrical service provider serving Waukesha, WI and nearby communities since 2003. As a licensed and insured contracting company, we specialize i...



Estimated Electrical Service Costs in Genesee, WI

Emergency After-Hours CallEstimated Range
$279 - $379
Electrical Safety InspectionEstimated Range
$124 - $169
EV Charger InstallationEstimated Range
$824 - $1,109
Panel Upgrade (200 Amp)Estimated Range
$2,794 - $3,729
Ceiling Fan InstallationEstimated Range
$244 - $334

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Genesee. Prices include standard parts and labor adjusted for 2026 economic projections.

Frequently Asked Questions

I smell something burning from an outlet and lost power in part of my house. How fast can an electrician get to me in Genesee?

For an emergency like a burning smell, we prioritize immediate dispatch. From our base near Genesee Town Park, we can typically reach homes in the Depot area via I-94 in 5 to 8 minutes. The first step is to shut off power to the affected circuit at your main panel to mitigate fire risk until we arrive to diagnose the fault, which is often a failing connection at an outlet or within the panel itself.

I have a 100-amp Federal Pacific panel and want to add a heat pump and an EV charger. Is this safe or do I need an upgrade?

Installing major new loads on that existing setup is not safe or practical. Federal Pacific panels have a known failure rate and are not listed for new breakers. A 100A service from 1981 cannot support the continuous draw of a Level 2 EV charger or a modern heat pump. A full service upgrade to 200A, including replacement of the recalled panel, is the required first step to ensure safety and provide the necessary capacity for these efficient but power-hungry systems.

My power comes in on an overhead line to a mast on the roof. What should I be watching for as a homeowner?

With an overhead mast service, your vigilance should focus on the physical integrity of the entrance cable and mast head. Look for weathering, corrosion, or any sagging where the utility line connects. Ensure tree limbs are kept well clear. This mast assembly is your home's first point of contact with the grid, and its condition is vital for preventing weather-related outages and fire hazards, especially during ice or wind events.

We have a lot of trees around our house near Genesee Town Park. Could that be causing our flickering lights?

Yes, the heavy tree canopy on the glacial moraine can directly impact electrical health. Branches contacting overhead service drops are a frequent cause of intermittent faults and flickering. Furthermore, the rocky, well-drained soil common here can challenge grounding system effectiveness, making proper installation of grounding rods critical. An electrician can assess both your service drop clearance and ground resistance to address these terrain-related issues.

I'm adding a circuit in Genesee. Do I need a permit, and will the work be up to current code?

Yes, the Town of Genesee Building Inspection Department requires permits for most electrical work beyond simple repairs. As a Master Electrician licensed by the Wisconsin Department of Safety and Professional Services, I ensure all installations comply with the NEC 2020, which is the adopted standard. Handling this red tape and providing the necessary documentation for inspection is part of the service, guaranteeing your project is safe, legal, and insurable.

My smart devices keep resetting during thunderstorms here. Is this a problem with We Energies or my home's wiring?

While We Energies manages the grid, Genesee's moderate surge risk from seasonal thunderstorms means protection is ultimately a homeowner's responsibility. Grid fluctuations can send damaging surges through your wiring. A whole-house surge protector installed at your main panel is the most effective defense for sensitive electronics. This device works alongside properly installed grounding electrodes to shunt excess voltage safely to earth before it reaches your outlets.

How can I prepare my home's electrical system for a Genesee winter with potential ice storms and heating surges?

Winter preparedness starts with a professional inspection of your service entrance and mast, where ice accumulation can cause damage. Ensure your heating system's circuit is dedicated and properly sized. For extended outages common in our rolling terrain, a permanently installed generator with an automatic transfer switch is the safest solution. Portable generators require meticulous setup to prevent backfeed, which is lethal to utility workers.

My home in Genesee Depot was built in 1981, and the lights dim when my appliances turn on. Is my electrical system too old?

A 45-year-old electrical system often lacks the capacity for modern loads. Your home likely has original NM-B Romex and a 100A panel, which was standard for its era but wasn't designed for today's simultaneous demands from computers, large TVs, and kitchen gadgets. Upgrading the service and modernizing the branch circuits with dedicated AFCI breakers for bedrooms is a common and necessary step for safety and reliability in homes of this vintage.

Scroll to Top
CALL US NOW