Top Emergency Electricians in Kemp, TX, 75143 | Compare & Call

There are 62 electrician companies server in Kemp TX

Pro-Master Electric

Pro-Master Electric

3841 S I-35E, Waxahachie TX 75165
Electricians, Lighting Fixtures & Equipment

Pro-Master Electric is a trusted, locally-owned electrical contractor serving Waxahachie and the surrounding Ellis County area. Our team of fully licensed and insured professionals specializes in comp...

TSI Electric

TSI Electric

Ennis TX 75120
Electricians, Lighting Fixtures & Equipment

TSI Electric was founded by Timothy, whose journey in the electrical trade began in a high school work program with a family-owned company. Over the years, he honed his skills and eventually became a ...

Phillips Electrical Services

Phillips Electrical Services

Quinlan TX 75474
Electricians

Phillips Electrical Services is a trusted local electrician serving Quinlan, TX, and the surrounding areas. We specialize in diagnosing and solving the common electrical problems homeowners face, such...

Electrician Near Me DFW

Electrician Near Me DFW

Dallas TX 75160
Electricians

Electrician Near Me DFW is a licensed and insured electrical service provider serving the Dallas-Fort Worth area. Our team of trained and certified electricians offers 24/7 emergency repair services f...

Knight's Electric

Knight's Electric

★★★☆☆ 3.0 / 5 (2)
Corsicana TX 75110
Electricians

For over three decades, Knight's Electric has been the trusted electrical service provider for Corsicana homeowners and businesses. Founded on a commitment to safety, reliability, and value, we bring ...

A to Z Electric

A to Z Electric

1317 US Hwy 175 Ste 400, Crandall TX 75114
Electricians

A to Z Electric is a family-owned and operated electrical contractor proudly serving Crandall and the greater Dallas/Fort Worth area for over 20 years. Our licensed and insured team brings deep local ...

LoneStar Electrical Contractors

LoneStar Electrical Contractors

Royse City TX 75189
Electricians

For over two decades, LoneStar Electrical Contractors has been the trusted local electrician for Royse City homes and businesses. As a family-owned company since 1997, we build lasting relationships b...

Aplus Handyman Sidney

Aplus Handyman Sidney

2400 Timberline Dr, Grapevine TX 76051
Handyman, Electricians, Carpenters

Aplus Handyman Sidney is a trusted, full-service provider for Grapevine, TX homeowners, specializing in electrical, carpentry, plumbing, and general repair. We understand local concerns like electrica...

A And M Electrical

A And M Electrical

★★★★★ 5.0 / 5 (1)
Corsicana TX 75109
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

A And M Electrical is a licensed electrical service provider based in Corsicana, TX, serving the local community since 2016. Specializing in residential and commercial projects, they offer a range of ...

Fix It All DFW

Fix It All DFW

Kaufman TX 75142
Handyman, Electricians, Plumbing

For 38 years, the foundation of Fix It All DFW has been built on hard work and skilled craftsmanship, starting from the ground up. What began as a part-time endeavor, balancing full-time jobs, has gro...



Estimated Electrical Service Costs in Kemp, TX

Emergency After-Hours CallEstimated Range
$214 - $289
Electrical Safety InspectionEstimated Range
$94 - $129
EV Charger InstallationEstimated Range
$624 - $839
Panel Upgrade (200 Amp)Estimated Range
$2,114 - $2,824
Ceiling Fan InstallationEstimated Range
$184 - $254

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Kemp. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

I want to upgrade my panel. What permits are needed from the Kemp Building Inspection Department, and are you licensed?

Any service upgrade or panel replacement in Kemp requires a permit from the Kemp Building Inspection Department and a final inspection to ensure compliance with the 2023 NEC. As a Master Electrician licensed by the Texas Department of Licensing and Regulation (TDLR), I handle the entire permit process—filing the paperwork, scheduling inspections, and ensuring the installation meets all current code requirements for safety and capacity. This official oversight is your guarantee the work is done correctly and legally.

We have flat, rocky soil out here near the lake. Could that be causing my grounding or power quality issues?

Absolutely. The flat, rocky plains around Cedar Creek Lake Estates present a challenge for grounding. Low-conductivity soil can lead to a high-resistance ground, compromising your entire home's safety system and potentially causing erratic equipment behavior. We often need to install additional grounding rods or a ground ring to achieve the low-resistance connection required by code. Furthermore, the open terrain offers little buffer for the overhead lines, making your service more susceptible to lightning-induced surges.

My power comes from an overhead mast on the roof. What maintenance should I be aware of for this setup?

Overhead service masts, common in Kemp's rural areas, require periodic visual inspection. Check for any sagging or fraying of the service drop cables between the pole and your mast head. Ensure the mast itself is still securely fastened to the structure and that the weatherhead is intact to prevent water infiltration. Heavy tree limbs near the lines should be trimmed back by the utility or a professional to prevent outages. Any damage here is the homeowner's responsibility up to the connection point.

My smart TVs and computers keep getting reset by power flickers from Trinity Valley Electric. What's the solution?

The Trinity Valley Electric Cooperative grid in our rural area is prone to voltage fluctuations and lightning-induced surges, which are harsh on sensitive electronics. A simple power strip offers no real protection. You need a layered defense: a whole-house surge protector installed at your main service panel to clamp major spikes from the utility line, combined with point-of-use UPS units for critical devices. This setup safeguards your investment against the high surge risk common in our region.

I smell burning near my electrical panel and lost power. How quickly can an electrician get to me in Kemp?

A burning odor with a power loss is a critical safety issue that requires immediate dispatch. From our shop near Kemp City Hall, we can typically be at your Cedar Creek Lake Estates home in 5-8 minutes via US-175. Your priority is to shut off the main breaker if it's safe to do so and evacuate the area around the panel. Our first response will focus on isolating the hazard—often a failed breaker or overheated connection—before restoring power safely.

How can I prepare my Kemp home's electrical system for summer brownouts and winter ice storms?

Kemp's summer AC peak strains the grid, while winter lows near 24°F bring ice that can down power lines. For brownouts, a properly installed automatic standby generator with a transfer switch keeps essential circuits online safely, preventing damage from low voltage. For surge protection, a whole-house device is crucial year-round. Ensuring your grounding electrode system is intact is also vital, as it provides a safe path for lightning and fault currents during severe storms.

I have an old 100-amp Federal Pacific panel. Can I safely add a Level 2 EV charger or a new heat pump?

A Federal Pacific panel presents two distinct challenges. First, the brand is known for faulty breakers that can fail to trip during an overload, creating a significant fire hazard. Second, a 100-amp service from 1975 lacks the physical space and electrical capacity for high-draw additions like a 240-volt EV charger or a heat pump. A full service upgrade to a modern 200-amp panel with AFCI breakers is not just recommended; it's a necessary safety and capacity upgrade for any major appliance installation.

My 51-year-old Kemp home has original wiring. Why do my lights dim every time I turn on the microwave?

Homes in Cedar Creek Lake Estates built around 1975 have 51-year-old electrical systems designed for a different era. The original NM-B Romex wiring is often undersized for modern 2026 appliance loads, causing voltage drop when high-draw devices like microwaves or air conditioners cycle on. A 100-amp service panel, common for that period, simply lacks the capacity for today's simultaneous energy demands. Upgrading to a 200-amp service with new branch circuits resolves this by providing the necessary power reserves.

Scroll to Top
CALL US NOW