Top Emergency Electricians in Kemp, TX, 75143 | Compare & Call

There are 62 electrician companies server in Kemp TX

Electrical Panel Xperts

Electrical Panel Xperts

★★★★★ 5.0 / 5 (1)
17652 Farm To Market 548, Forney TX 75126
Electricians

Electrical Panel Xperts is a family-owned electrical service based in Forney, TX, founded on over 15 years of professional experience. Our journey began in San Antonio in 2005, working across both com...

All Electric Service

All Electric Service

★★★☆☆ 3.2 / 5 (11)
6012 Harrison Way, Watauga TX 76148
Electricians

All Electric Service is your trusted local electrician serving Watauga, TX, and the surrounding communities. We specialize in comprehensive electrical solutions, from routine repairs to complex instal...

C Woods Company

C Woods Company

★★★☆☆ 2.8 / 5 (30)
2320 E Erwin St Ste B, Tyler TX 75702
Heating & Air Conditioning/HVAC, Plumbing, Electricians

Now operating as Ace Hardware of Tyler, the team behind C. Woods Company brings over six decades of dedicated home service experience to East Texas. Since 1956, this locally owned and operated busines...

Mister Sparky of Tyler

Mister Sparky of Tyler

★★★★★ 5.0 / 5 (1)
6724 S Broadway Ave Ste 200, Tyler TX 75703
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Mister Sparky of Tyler has been the trusted local electrical expert for East Texas since 2008. Our fully licensed and insured team provides a reliable, clean, and professional service experience for b...

Honorable Electric Service

Honorable Electric Service

★★★★☆ 4.0 / 5 (3)
Athens TX 75752
Electricians, EV Charging Stations, Solar Installation

Honorable Electric Service is a trusted, licensed electrical contractor serving Athens, Tyler, and the surrounding DFW metroplex. We provide reliable residential and commercial electrical solutions, f...

Ranger Electrical

Ranger Electrical

Tyler TX 75701
Electricians, General Contractors

Ranger Electrical is a trusted electrical and general contracting service based in Tyler, TX, led by Corbin, the youngest master electrician in Texas. With a focus on safety, reliability, and sustaina...

Garcia & Sons

Garcia & Sons

393 Haws Rd, Jacksonville TX 75766
General Contractors, Electricians, Tree Services

Garcia & Sons is a family-owned and operated business serving Jacksonville, TX, founded by Rafael Garcia and his sons. Rafael holds a Bachelor's degree in Construction Management and is a licensed jou...

Golden Electrician

Golden Electrician

★★★★★ 4.7 / 5 (3)
Chandler TX 75758
Electricians, Lighting Fixtures & Equipment

Golden Electrician is Chandler's trusted electrical service provider, specializing in the reliable solutions local homeowners need. We understand that common issues like loose electrical connections a...

GO 2 Electrical Service

GO 2 Electrical Service

Athens TX 75752
Electricians

GO 2 Electrical Service is a trusted electrical contractor serving Athens, TX, with 17 years of hands-on experience. As a master electrician, I founded this business to provide reliable electrical sol...

Stiletto's Electrical & Construction

Stiletto's Electrical & Construction

★★★☆☆ 3.0 / 5 (2)
709 Vz CR 2719, Mabank TX 75147
General Contractors, Handyman, Electricians

Stiletto's Electrical & Construction is your trusted local partner in Mabank, TX, built on over 30 years of hands-on experience in electrical, plumbing, and carpentry. We understand that honesty, loya...



Estimated Electrical Service Costs in Kemp, TX

Emergency After-Hours CallEstimated Range
$214 - $289
Electrical Safety InspectionEstimated Range
$94 - $129
EV Charger InstallationEstimated Range
$624 - $839
Panel Upgrade (200 Amp)Estimated Range
$2,114 - $2,824
Ceiling Fan InstallationEstimated Range
$184 - $254

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Kemp. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

I want to upgrade my panel. What permits are needed from the Kemp Building Inspection Department, and are you licensed?

Any service upgrade or panel replacement in Kemp requires a permit from the Kemp Building Inspection Department and a final inspection to ensure compliance with the 2023 NEC. As a Master Electrician licensed by the Texas Department of Licensing and Regulation (TDLR), I handle the entire permit process—filing the paperwork, scheduling inspections, and ensuring the installation meets all current code requirements for safety and capacity. This official oversight is your guarantee the work is done correctly and legally.

We have flat, rocky soil out here near the lake. Could that be causing my grounding or power quality issues?

Absolutely. The flat, rocky plains around Cedar Creek Lake Estates present a challenge for grounding. Low-conductivity soil can lead to a high-resistance ground, compromising your entire home's safety system and potentially causing erratic equipment behavior. We often need to install additional grounding rods or a ground ring to achieve the low-resistance connection required by code. Furthermore, the open terrain offers little buffer for the overhead lines, making your service more susceptible to lightning-induced surges.

My power comes from an overhead mast on the roof. What maintenance should I be aware of for this setup?

Overhead service masts, common in Kemp's rural areas, require periodic visual inspection. Check for any sagging or fraying of the service drop cables between the pole and your mast head. Ensure the mast itself is still securely fastened to the structure and that the weatherhead is intact to prevent water infiltration. Heavy tree limbs near the lines should be trimmed back by the utility or a professional to prevent outages. Any damage here is the homeowner's responsibility up to the connection point.

My smart TVs and computers keep getting reset by power flickers from Trinity Valley Electric. What's the solution?

The Trinity Valley Electric Cooperative grid in our rural area is prone to voltage fluctuations and lightning-induced surges, which are harsh on sensitive electronics. A simple power strip offers no real protection. You need a layered defense: a whole-house surge protector installed at your main service panel to clamp major spikes from the utility line, combined with point-of-use UPS units for critical devices. This setup safeguards your investment against the high surge risk common in our region.

I smell burning near my electrical panel and lost power. How quickly can an electrician get to me in Kemp?

A burning odor with a power loss is a critical safety issue that requires immediate dispatch. From our shop near Kemp City Hall, we can typically be at your Cedar Creek Lake Estates home in 5-8 minutes via US-175. Your priority is to shut off the main breaker if it's safe to do so and evacuate the area around the panel. Our first response will focus on isolating the hazard—often a failed breaker or overheated connection—before restoring power safely.

How can I prepare my Kemp home's electrical system for summer brownouts and winter ice storms?

Kemp's summer AC peak strains the grid, while winter lows near 24°F bring ice that can down power lines. For brownouts, a properly installed automatic standby generator with a transfer switch keeps essential circuits online safely, preventing damage from low voltage. For surge protection, a whole-house device is crucial year-round. Ensuring your grounding electrode system is intact is also vital, as it provides a safe path for lightning and fault currents during severe storms.

I have an old 100-amp Federal Pacific panel. Can I safely add a Level 2 EV charger or a new heat pump?

A Federal Pacific panel presents two distinct challenges. First, the brand is known for faulty breakers that can fail to trip during an overload, creating a significant fire hazard. Second, a 100-amp service from 1975 lacks the physical space and electrical capacity for high-draw additions like a 240-volt EV charger or a heat pump. A full service upgrade to a modern 200-amp panel with AFCI breakers is not just recommended; it's a necessary safety and capacity upgrade for any major appliance installation.

My 51-year-old Kemp home has original wiring. Why do my lights dim every time I turn on the microwave?

Homes in Cedar Creek Lake Estates built around 1975 have 51-year-old electrical systems designed for a different era. The original NM-B Romex wiring is often undersized for modern 2026 appliance loads, causing voltage drop when high-draw devices like microwaves or air conditioners cycle on. A 100-amp service panel, common for that period, simply lacks the capacity for today's simultaneous energy demands. Upgrading to a 200-amp service with new branch circuits resolves this by providing the necessary power reserves.

Scroll to Top
CALL US NOW