Top Emergency Electricians in Grapevine, TX, 75019 | Compare & Call

There are 237 electrician companies server in Grapevine TX

Tier-One Electric

Tier-One Electric

★★★★★ 5.0 / 5 (5)
2637 Surrey Woods Rd, Flower Mound TX 75028
Electricians

Tier-One Electric is a trusted, local electrical contractor serving Flower Mound homeowners. We specialize in resolving the common electrical issues faced by our community, such as flickering lights a...

George F Electrical Contracting

George F Electrical Contracting

★★★★★ 4.6 / 5 (39)
Hurst TX 76053
Electricians, Lighting Fixtures & Equipment

George F Electrical Contracting LLC is a family-owned and operated electrical service based in Hurst, TX. Founded by George, who started in the trade at a young age and worked his way up to earn his m...

Eric's Electrical Heating & Air Conditioning

Eric's Electrical Heating & Air Conditioning

★★★★★ 5.0 / 5 (3)
Garland TX 75043
Electricians, Heating & Air Conditioning/HVAC, Air Duct Cleaning

Eric's Electrical Heating & Air Conditioning is a family-owned and operated company serving Garland, TX, with comprehensive electrical, HVAC, and air duct services. We take pride in transparent, relia...

Richardson Ready Electric

Richardson Ready Electric

★★★☆☆ 2.9 / 5 (15)
620 N Interurban St, Richardson TX 75081
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Richardson Ready Electric has been the trusted electrical service provider for the Dallas-Fort Worth Metroplex since 1988. As a locally-owned and operated business, we specialize in comprehensive elec...

Arrow Electric

Arrow Electric

★★★★☆ 3.8 / 5 (23)
2903 National Dr, Garland TX 75041
Electricians, Lighting Fixtures & Equipment

Arrow Electric has been a trusted electrical partner for Garland homes and businesses since 1997. Founded by Master Electrician Mark Thacker, our journey began in commercial contracting, but we saw a ...

A#1 Air

A#1 Air

★★☆☆☆ 2.1 / 5 (626)
601 E Corporate Dr, Lewisville TX 75057
Heating & Air Conditioning/HVAC, Electricians, Plumbing

A#1 Air is a trusted, family-owned home service provider founded in Lewisville by James and Sherry over 25 years ago. Starting with just the two of them, they have grown into a cornerstone of the Dall...

Cotton Electric Service

Cotton Electric Service

★★★★☆ 4.1 / 5 (7)
1130 Cedar Ridge Dr, Duncanville TX 75116
Electricians

Cotton Electric Service is a family-owned and operated electrical contractor proudly serving Duncanville and the greater Dallas-Fort Worth area since 1980. Founded by Rick Cotton, the company is built...

Jay Electrical Services

Jay Electrical Services

★★★★★ 5.0 / 5 (1)
Frisco TX 75035
Electricians, EV Charging Stations, Lighting Fixtures & Equipment

Jay Electrical Services is a locally owned and operated electrical contractor proudly serving Frisco and the surrounding communities. With over 12 years of hands-on experience, owner Jay is a master e...

Eagle-R Electrical

Eagle-R Electrical

★★★★★ 5.0 / 5 (1)
Arlington TX 76018
Electricians, Lighting Fixtures & Equipment

Eagle-R Electrical is a locally owned and operated electrical service provider in Arlington, Texas, dedicated to offering reliable and skilled electrical solutions. We specialize in a comprehensive ra...

D.A.D Home Services

D.A.D Home Services

★★★★★ 5.0 / 5 (3)
Arlington TX 76016
Heating & Air Conditioning/HVAC, Electricians, Generator Installation/Repair

Founded in 2023, D.A.D Home Services is a local, family-run HVAC and electrical company serving Arlington, TX. We believe in building a company that helps our neighbors maintain their homes and busine...



Estimated Electrical Service Costs in Grapevine, TX

Emergency After-Hours CallEstimated Range
$249 - $339
Electrical Safety InspectionEstimated Range
$109 - $149
EV Charger InstallationEstimated Range
$734 - $984
Panel Upgrade (200 Amp)Estimated Range
$2,474 - $3,304
Ceiling Fan InstallationEstimated Range
$219 - $294

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Grapevine. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

I found a Federal Pacific panel in my 1991 home. Is it safe to add a 240V circuit for an electric car charger or a new heat pump?

No, it is not safe to add major loads to a Federal Pacific panel. These panels have a known, documented failure rate where breakers do not trip during an overload or short circuit, creating a serious fire risk. Your home's 150A service capacity may technically support a Level 2 EV charger or heat pump, but the hazardous panel must be replaced first. This upgrade ensures both code compliance and the safe operation of your new high-demand appliances.

My power comes in underground. If I need a panel upgrade or new meter, what does that process look like with the city and Oncor?

Upgrading a service with an underground lateral is a coordinated process. We first secure the required electrical permit from the Grapevine Building Inspection Division. Oncor must then schedule a crew to pull the old meter and potentially upgrade the meter enclosure. As your electrician, we handle all coordination, install the new panel and grounding, and ensure the final inspection passes before Oncor restores power. The underground feed typically simplifies the final connection.

How can I prepare my home's electrical system for North Texas ice storms and the summer AC strain that causes brownouts?

Preparation involves addressing both reliability and protection. For winter storms, consider a professionally installed generator interlock kit and transfer switch, which allows you to safely back up essential circuits. For summer brownouts, which cause low voltage that can damage compressor motors, a whole-house surge protector is critical. It also safeguards against the surges that frequently occur when utility power flickers back on after an outage.

My smart TVs and computers keep getting damaged by power surges. Is this an Oncor grid problem or something wrong with my house wiring?

Oncor manages a robust grid, but our region experiences high lightning activity, which induces powerful surges on both overhead and underground lines. These transient spikes can travel into your home, bypassing basic power strips and damaging sensitive electronics. The issue is typically a lack of whole-house surge protection installed at your main electrical panel. This device is now required by the 2023 NEC for new services and is the only effective defense for a modern smart home.

We have rocky, rolling prairie soil near Main Street. Could that be why my GFCI outlets outside keep tripping or my lights sometimes flicker?

The rocky, variable soil common in our rolling prairie can absolutely impact your electrical system's health. It can compromise the grounding electrode system, leading to unstable voltage references that might cause flickering or nuisance tripping of sensitive breakers. Furthermore, expansive clay soils shift with moisture, potentially stressing underground service conduits. An expert should test your grounding resistance and inspect your service lateral for integrity.

I've lost all power and smell something burning from an outlet. How fast can an electrician get here to prevent a fire?

For a situation involving a burning smell and total power loss, we treat it as a critical emergency and dispatch immediately. From our base near Grapevine Main Street Station, we can be at your door in the Garden District within 5-8 minutes, using TX-114 for the fastest route. Our first priority is to safely isolate the fault at your main panel to stop the hazard, then diagnose the damaged circuit.

My lights dim when the AC kicks on, and my breakers trip with the microwave and hair dryer running at the same time. Is it just my old Grapevine Garden District house, or is this common?

A home built around 1991 with its original NM-B Romex wiring is now 35 years old. While the copper conductors are likely sound, the entire system was designed for the electrical loads of that era. Modern kitchens, home offices, and entertainment centers place a much higher, simultaneous demand on circuits that were never sized for it. This often leads to voltage drop, causing lights to dim, and overloads that trip breakers, signaling your 150A panel is working hard to keep up.

I want to add a circuit myself, but I'm worried about permits and code. What does the City of Grapevine require, and is it really necessary?

The City of Grapevine requires a permit for any new circuit, panel work, or service change, enforced by the Building Inspection Division. This isn't bureaucratic red tape; it's a vital safety check. The inspection verifies the work complies with the 2023 National Electrical Code, which is Texas law. Unpermitted work can void your homeowner's insurance and create sale issues. As a master electrician licensed by the Texas Department of Licensing and Regulation, I manage the entire permit process for you.

Scroll to Top
CALL US NOW