Top Emergency Electricians in Grapevine, TX, 75019 | Compare & Call

There are 237 electrician companies server in Grapevine TX

HART HVAC

HART HVAC

★★★★★ 4.5 / 5 (8)
2915 Greenlee Park Trl, Weatherford TX 76088
Heating & Air Conditioning/HVAC, Electricians

My journey in the trades began right here in Texas, fresh out of high school, working in hot attics and learning the business from the ground up. After over 14 years of experience and earning my maste...

DTR Electric

DTR Electric

★★★★★ 5.0 / 5 (1)
Allen TX 75013
Electricians, Lighting Fixtures & Equipment, EV Charging Stations

DTR Electric is a trusted, locally-owned electrical service provider in Allen, TX. We specialize in a full range of residential and commercial electrical work, from essential repairs and panel upgrade...

Clements Electric

Clements Electric

★★★★☆ 3.6 / 5 (34)
1275 N Main St Ste 306, Mansfield TX 76063
Electricians, Lighting Fixtures & Equipment

Clements Electric is a veteran-owned and family-operated electrical service company serving Mansfield, TX, and the DFW area since 1982. Founded by Mike, a dedicated professional committed to providing...

Hightower Service

Hightower Service

★★★★★ 4.5 / 5 (23)
606 W Main St, Arlington TX 76010
Heating & Air Conditioning/HVAC, Electricians, Generator Installation/Repair

Hightower Service has been a trusted provider of HVAC and electrical solutions for Arlington, TX, homeowners and businesses for over seven decades. We specialize in a comprehensive range of services, ...

Joseph Consulting Services

Joseph Consulting Services

Arlington TX 76006
Electricians

Joseph Consulting Services is your trusted local electrician in Arlington, founded on over a decade of hands-on experience that began in 2011. Owner Joseph's journey reflects a deep commitment to the ...

J&M Electrical Services

J&M Electrical Services

★★★★★ 5.0 / 5 (2)
1133 W Main St, Arlington TX 76013
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

J&M Electrical Services is your Arlington-based electrical partner, founded on a foundation of real-world expertise. The journey began while the founder was studying electrical engineering at UTA and ...

Saul’s Power Solution

Saul’s Power Solution

★★★★★ 4.6 / 5 (10)
Arlington TX 76010
Electricians, Home Automation, Lighting Fixtures & Equipment

Saul's Power Solution is a licensed electrical contractor serving Arlington, TX, specializing in residential electrical services, home automation, and lighting solutions. With expertise in circuit bre...

RJ's Electric

RJ's Electric

★★★★★ 5.0 / 5 (5)
Arlington TX 76002
Electricians

RJ's Electric has been a trusted electrical contractor serving Arlington since 1998, operating as a well-established, master electrician-led business. The company is built on a foundation of customer ...

Crest Electrical Solutions

Crest Electrical Solutions

2751 E Lamar Blvd, Arlington TX 76011
Electricians, Security Systems

Crest Electrical Solutions is a locally owned and operated residential electrical contractor, proudly serving Arlington and the greater DFW area since 1992. As the largest residential electrical contr...

Morgan Motions

Morgan Motions

Arlington TX 76018
Plumbing, Heating & Air Conditioning/HVAC, Electricians

Morgan Motions LLC is a family-owned plumbing, HVAC, and electrical company serving Arlington, TX. We're built on the belief that our customers are more than just clients—they're neighbors and friends...



Estimated Electrical Service Costs in Grapevine, TX

Emergency After-Hours CallEstimated Range
$249 - $339
Electrical Safety InspectionEstimated Range
$109 - $149
EV Charger InstallationEstimated Range
$734 - $984
Panel Upgrade (200 Amp)Estimated Range
$2,474 - $3,304
Ceiling Fan InstallationEstimated Range
$219 - $294

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Grapevine. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

I found a Federal Pacific panel in my 1991 home. Is it safe to add a 240V circuit for an electric car charger or a new heat pump?

No, it is not safe to add major loads to a Federal Pacific panel. These panels have a known, documented failure rate where breakers do not trip during an overload or short circuit, creating a serious fire risk. Your home's 150A service capacity may technically support a Level 2 EV charger or heat pump, but the hazardous panel must be replaced first. This upgrade ensures both code compliance and the safe operation of your new high-demand appliances.

My power comes in underground. If I need a panel upgrade or new meter, what does that process look like with the city and Oncor?

Upgrading a service with an underground lateral is a coordinated process. We first secure the required electrical permit from the Grapevine Building Inspection Division. Oncor must then schedule a crew to pull the old meter and potentially upgrade the meter enclosure. As your electrician, we handle all coordination, install the new panel and grounding, and ensure the final inspection passes before Oncor restores power. The underground feed typically simplifies the final connection.

How can I prepare my home's electrical system for North Texas ice storms and the summer AC strain that causes brownouts?

Preparation involves addressing both reliability and protection. For winter storms, consider a professionally installed generator interlock kit and transfer switch, which allows you to safely back up essential circuits. For summer brownouts, which cause low voltage that can damage compressor motors, a whole-house surge protector is critical. It also safeguards against the surges that frequently occur when utility power flickers back on after an outage.

My smart TVs and computers keep getting damaged by power surges. Is this an Oncor grid problem or something wrong with my house wiring?

Oncor manages a robust grid, but our region experiences high lightning activity, which induces powerful surges on both overhead and underground lines. These transient spikes can travel into your home, bypassing basic power strips and damaging sensitive electronics. The issue is typically a lack of whole-house surge protection installed at your main electrical panel. This device is now required by the 2023 NEC for new services and is the only effective defense for a modern smart home.

We have rocky, rolling prairie soil near Main Street. Could that be why my GFCI outlets outside keep tripping or my lights sometimes flicker?

The rocky, variable soil common in our rolling prairie can absolutely impact your electrical system's health. It can compromise the grounding electrode system, leading to unstable voltage references that might cause flickering or nuisance tripping of sensitive breakers. Furthermore, expansive clay soils shift with moisture, potentially stressing underground service conduits. An expert should test your grounding resistance and inspect your service lateral for integrity.

I've lost all power and smell something burning from an outlet. How fast can an electrician get here to prevent a fire?

For a situation involving a burning smell and total power loss, we treat it as a critical emergency and dispatch immediately. From our base near Grapevine Main Street Station, we can be at your door in the Garden District within 5-8 minutes, using TX-114 for the fastest route. Our first priority is to safely isolate the fault at your main panel to stop the hazard, then diagnose the damaged circuit.

My lights dim when the AC kicks on, and my breakers trip with the microwave and hair dryer running at the same time. Is it just my old Grapevine Garden District house, or is this common?

A home built around 1991 with its original NM-B Romex wiring is now 35 years old. While the copper conductors are likely sound, the entire system was designed for the electrical loads of that era. Modern kitchens, home offices, and entertainment centers place a much higher, simultaneous demand on circuits that were never sized for it. This often leads to voltage drop, causing lights to dim, and overloads that trip breakers, signaling your 150A panel is working hard to keep up.

I want to add a circuit myself, but I'm worried about permits and code. What does the City of Grapevine require, and is it really necessary?

The City of Grapevine requires a permit for any new circuit, panel work, or service change, enforced by the Building Inspection Division. This isn't bureaucratic red tape; it's a vital safety check. The inspection verifies the work complies with the 2023 National Electrical Code, which is Texas law. Unpermitted work can void your homeowner's insurance and create sale issues. As a master electrician licensed by the Texas Department of Licensing and Regulation, I manage the entire permit process for you.

Scroll to Top
CALL US NOW