Top Emergency Electricians in Grapevine, TX, 75019 | Compare & Call

Grapevine Electricians Pros

Grapevine Electricians Pros

Grapevine, TX
Local Services

Phone : (888) 903-2131

Power out? Need immediate help? Our Grapevine state-short electricians respond fast to emergencies.
FEATURED

There are 237 electrician companies server in Grapevine TX

Great Brother Electrical Services

Great Brother Electrical Services

★★★★★ 4.7 / 5 (50)
Garland TX 75040
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Great Brother Electrical Services is a family-owned and operated electrical company proudly serving Garland, Texas, and the wider DFW metroplex since 2017. Founded by brothers Jose and Joshua Mendoza,...

Electrician On Call

Electrician On Call

★★★★★ 4.6 / 5 (246)
6703 Levelland Rd Ste B, Dallas TX 75252
Electricians, Heating & Air Conditioning/HVAC

Electrician On Call is a family-owned electrical and HVAC contractor serving Dallas and the DFW area since 2002. Founded by David Jones, a Master Electrician and HVAC Lead with over 20 years of experi...

Carroll Service

Carroll Service

★★★★★ 4.8 / 5 (26)
408 N Main St Ste C, Keller TX 76248
Electricians, Lighting Fixtures & Equipment

Carroll Service Co is a family-founded electrical contractor based in Keller, TX, led by Master Electrician Gabriel Carroll. As a fourth-generation tradesman, Gabriel built the company on a foundation...

Leo Electric Service

Leo Electric Service

★★★★★ 4.8 / 5 (38)
Frisco TX 75034
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Leo Electric Service is a trusted, licensed electrical contractor serving the Frisco community. We specialize in a comprehensive range of services, from essential circuit breaker and electrical panel ...

HR Phoenix Electrical & Plumbing

HR Phoenix Electrical & Plumbing

★★★★☆ 4.3 / 5 (92)
7171 Latham Dr, Richland Hills TX 76118
Electricians

Founded in 2018 by Master Electrician Paul Rylee and his wife Heidi, HR Phoenix Electrical & Plumbing is a trusted, family-owned electrical contractor serving Richland Hills and the DFW area. With 27 ...

TrueServe Electric

TrueServe Electric

★★★★★ 4.8 / 5 (9)
Midlothian TX 76065
Electricians

TrueServe Electric is your trusted local electrical contractor in Midlothian, TX, founded by master electrician Jon McGee with over a decade of hands-on experience. We specialize in providing reliable...

All Pro Electrical Services

All Pro Electrical Services

★★★★★ 5.0 / 5 (1)
13495 Overlook Ln, Forney TX 75126
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Founded in 2012 through the merger of two established local electrical companies, All Pro Electrical Services brings over 50 years of combined Texas experience to Forney homes and businesses. As a lic...

TopTech Electric & Plumbing

TopTech Electric & Plumbing

★★★★★ 4.6 / 5 (125)
7415 Whitehall St Ste 119, Richland Hills TX 76118
Electricians, Plumbing, Water Heater Installation/Repair

TopTech Electric & Plumbing is a Richland Hills-based, state-licensed service provider dedicated to solving the electrical and plumbing needs of Tarrant, Denton, and Dallas County residents. As a Mast...

Kelly Young Electric

Kelly Young Electric

★★★★★ 5.0 / 5 (8)
Plano TX 75075
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Kelly Young Electric Inc. is a licensed and insured electrical contractor serving Plano and the surrounding area. We specialize in both residential and commercial electrical services, from routine rep...

JSR Electrical Services

JSR Electrical Services

★★★★★ 4.5 / 5 (61)
1110 South Airport Cir Ste 140, Euless TX 76040
Electricians, Lighting Fixtures & Equipment

JSR Electrical Services is a family-owned and veteran-operated electrical contractor based in Euless, TX, with over three decades of trusted service in the Dallas/Fort Worth area. Led by Master Electr...

« PreviousPage 1 of 24Next Page »


Estimated Electrical Service Costs in Grapevine, TX

Emergency After-Hours CallEstimated Range
$249 - $339
Electrical Safety InspectionEstimated Range
$109 - $149
EV Charger InstallationEstimated Range
$734 - $984
Panel Upgrade (200 Amp)Estimated Range
$2,474 - $3,304
Ceiling Fan InstallationEstimated Range
$219 - $294

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Grapevine. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

I found a Federal Pacific panel in my 1991 home. Is it safe to add a 240V circuit for an electric car charger or a new heat pump?

No, it is not safe to add major loads to a Federal Pacific panel. These panels have a known, documented failure rate where breakers do not trip during an overload or short circuit, creating a serious fire risk. Your home's 150A service capacity may technically support a Level 2 EV charger or heat pump, but the hazardous panel must be replaced first. This upgrade ensures both code compliance and the safe operation of your new high-demand appliances.

My power comes in underground. If I need a panel upgrade or new meter, what does that process look like with the city and Oncor?

Upgrading a service with an underground lateral is a coordinated process. We first secure the required electrical permit from the Grapevine Building Inspection Division. Oncor must then schedule a crew to pull the old meter and potentially upgrade the meter enclosure. As your electrician, we handle all coordination, install the new panel and grounding, and ensure the final inspection passes before Oncor restores power. The underground feed typically simplifies the final connection.

How can I prepare my home's electrical system for North Texas ice storms and the summer AC strain that causes brownouts?

Preparation involves addressing both reliability and protection. For winter storms, consider a professionally installed generator interlock kit and transfer switch, which allows you to safely back up essential circuits. For summer brownouts, which cause low voltage that can damage compressor motors, a whole-house surge protector is critical. It also safeguards against the surges that frequently occur when utility power flickers back on after an outage.

My smart TVs and computers keep getting damaged by power surges. Is this an Oncor grid problem or something wrong with my house wiring?

Oncor manages a robust grid, but our region experiences high lightning activity, which induces powerful surges on both overhead and underground lines. These transient spikes can travel into your home, bypassing basic power strips and damaging sensitive electronics. The issue is typically a lack of whole-house surge protection installed at your main electrical panel. This device is now required by the 2023 NEC for new services and is the only effective defense for a modern smart home.

We have rocky, rolling prairie soil near Main Street. Could that be why my GFCI outlets outside keep tripping or my lights sometimes flicker?

The rocky, variable soil common in our rolling prairie can absolutely impact your electrical system's health. It can compromise the grounding electrode system, leading to unstable voltage references that might cause flickering or nuisance tripping of sensitive breakers. Furthermore, expansive clay soils shift with moisture, potentially stressing underground service conduits. An expert should test your grounding resistance and inspect your service lateral for integrity.

I've lost all power and smell something burning from an outlet. How fast can an electrician get here to prevent a fire?

For a situation involving a burning smell and total power loss, we treat it as a critical emergency and dispatch immediately. From our base near Grapevine Main Street Station, we can be at your door in the Garden District within 5-8 minutes, using TX-114 for the fastest route. Our first priority is to safely isolate the fault at your main panel to stop the hazard, then diagnose the damaged circuit.

My lights dim when the AC kicks on, and my breakers trip with the microwave and hair dryer running at the same time. Is it just my old Grapevine Garden District house, or is this common?

A home built around 1991 with its original NM-B Romex wiring is now 35 years old. While the copper conductors are likely sound, the entire system was designed for the electrical loads of that era. Modern kitchens, home offices, and entertainment centers place a much higher, simultaneous demand on circuits that were never sized for it. This often leads to voltage drop, causing lights to dim, and overloads that trip breakers, signaling your 150A panel is working hard to keep up.

I want to add a circuit myself, but I'm worried about permits and code. What does the City of Grapevine require, and is it really necessary?

The City of Grapevine requires a permit for any new circuit, panel work, or service change, enforced by the Building Inspection Division. This isn't bureaucratic red tape; it's a vital safety check. The inspection verifies the work complies with the 2023 National Electrical Code, which is Texas law. Unpermitted work can void your homeowner's insurance and create sale issues. As a master electrician licensed by the Texas Department of Licensing and Regulation, I manage the entire permit process for you.

Scroll to Top
CALL US NOW