Top Emergency Electricians in Myrtle Beach, SC, 29568 | Compare & Call
Polar Air And Mechanical
Wired
Pruitt Electric
Common Questions
My home in The Market Common was built in 1991 and has original wiring. Why do my lights dim when the microwave and air conditioner run at the same time?
Your 35-year-old electrical system was designed for a different era of power consumption. The original NM-B Romex wiring is likely adequate, but the 150-amp service panel may have limited space on its bus bars for new circuits. Modern appliances like air fryers and large TVs add significant load that 1991-era panels weren't sized for, leading to voltage drop and dimming lights. This is a common capacity issue in older Myrtle Beach homes.
How should I prepare my Myrtle Beach home's electrical system for summer brownouts or a winter ice storm?
For summer peaks, ensure your AC condenser is on a dedicated, properly sized circuit and consider an HVAC tune-up to reduce electrical strain. A licensed electrician can install a manual transfer switch for a portable generator, which is essential for both summer outages and winter ice storms. Whole-house surge protection is also critical year-round to shield your system from the voltage fluctuations common during these events.
My home has an underground electrical service. What should I know about maintenance or issues with this setup?
Underground service laterals, common in neighborhoods like The Market Common, are generally more reliable against wind damage but are not immune to problems. The conduit can flood or the buried cable can be damaged by landscaping equipment or corrosion. Access for repair is at the meter base and at the utility's pad-mounted transformer. If you experience a total power loss while neighbors have power, the issue is likely in your underground service lateral or connection point.
My smart TVs and modem keep getting fried after storms. Is this a problem with Santee Cooper's power grid in Myrtle Beach?
While the utility provides the power, our coastal location has a high surge risk from frequent lightning. These transient voltage spikes can travel through Santee Cooper's lines and into your home, bypassing basic power strips. Protecting modern electronics requires a whole-house surge protector installed at your main panel. This device acts as a first line of defense, clamping dangerous surges before they reach your sensitive equipment.
I want to upgrade my electrical panel. What permits from the City of Myrtle Beach are required, and does it need to be inspected?
A service panel upgrade always requires a permit from the City of Myrtle Beach Building Department. As a Master Electrician licensed by the South Carolina Department of Labor, Licensing and Regulation, I pull this permit on your behalf. The work must comply with the current NEC 2023 code and will be inspected by the city to ensure safety. Never hire a contractor who suggests skipping this process; it is your guarantee the installation meets modern safety standards.
I lost power and smell burning plastic near my breaker box. How fast can an electrician get to my house in The Market Common?
For an active emergency like a burning smell, our dispatch prioritizes your call. From our starting point near the Myrtle Beach International Airport, we can typically be at your door within 10 to 15 minutes via the US-17 Bypass. Please turn off the main breaker if it is safe to do so and meet us outside. A burning odor often indicates a failing connection or breaker that requires immediate attention to prevent a fire.
I have a Federal Pacific panel and want to install a Level 2 EV charger. Is my 150-amp service from 1991 safe enough for this upgrade?
No, it is not safe to proceed without replacing the Federal Pacific panel first. These panels are a known fire hazard due to breakers that can fail to trip. Even with a new 200-amp panel, adding a 40-50 amp circuit for a Level 2 charger requires a detailed load calculation. Homes from 1991 often need a service upgrade to 200 amps to safely support a charger plus modern appliances like a heat pump without overloading the system.
We live on the flat coastal plain near the airport. Could the soil here affect my home's electrical grounding?
Yes, the sandy, conductive soil common in our area can actually improve grounding electrode performance compared to rocky terrain. However, the high moisture content can accelerate corrosion on underground metal components like your grounding rods or the utility's lateral connection. We recommend a periodic inspection of your grounding electrode system to ensure all connections are tight and free from significant corrosion, which is vital for safety during a lightning strike.