Top Emergency Electricians in Lebanon, PA, 17042 | Compare & Call
Earl Weaver Contractors
E H Williams & Sons
Question Answers
Our home in South Lebanon was built in 1988. Why do the lights dim when the air conditioner kicks on, and should I be worried about the old wiring?
Your home’s 38-year-old electrical system, originally wired with NM-B Romex, was sized for a different era. Modern appliances draw far more current, which can overload those original 15-amp and 20-amp kitchen and laundry circuits. Dimming lights under load is a classic sign the system is straining. While the wiring itself may still be sound if undisturbed, the main 100-amp service panel often lacks the spare capacity for today’s simultaneous high-demand devices, indicating an upgrade should be on your radar.
I have an old 100-amp panel and want to add a heat pump and an EV charger. Is my current setup in my 1988 South Lebanon home safe for that?
A standard 100-amp panel from 1988 is not safely rated for that combined load. Most Level 2 EV chargers require a dedicated 40 to 50-amp circuit, and a heat pump adds another 30 to 50 amps. More critically, many homes of that era in this area were fitted with Federal Pacific panels, which are a known fire hazard due to breakers that fail to trip. You’ll need a full service upgrade to 200 amps and panel replacement, which also allows for the required AFCI and GFCI protection mandated by current code.
My power comes from an overhead wire to a mast on the roof. What are the common issues with this setup in Lebanon?
Overhead service masts, common in our area, are exposed to the elements. The most frequent issues include masthead separation from the roof due to ice or wind load, deteriorated weatherhead seals allowing moisture into the service entrance cables, and damage from falling tree limbs. This can lead to water intrusion in your panel, corrosion, and intermittent faults. A tripped main breaker during a storm often points to mast or service cable damage. Regular visual inspections from the ground are wise, but repairs always require a utility disconnect.
I want to upgrade my electrical panel. What permits do I need from the City of Lebanon, and do the 2023 code rules apply?
Any service panel upgrade requires a permit from the City of Lebanon Building Code Department and a final inspection. Pennsylvania has adopted the 2023 National Electrical Code (NEC), so the installation must comply with its latest requirements for AFCI protection, GFCI locations, and emergency disconnects. As a Master Electrician licensed by the Pennsylvania Department of Labor and Industry, I handle the permit paperwork and ensure the work passes inspection, which is mandatory for Met-Ed to reconnect your upgraded service.
My power is completely out and I smell something burning near the panel. Who can get here fast in Lebanon, PA?
For a burning smell with a total outage, shut off the main breaker immediately. From the Lebanon Valley Mall area, a licensed electrician can typically be on-site within 8 to 12 minutes using US-422. This is a critical safety event that could involve a failing breaker, overheated bus bars, or a loose service cable connection. Do not attempt to reset the breaker; secure the scene and wait for a professional assessment to prevent an electrical fire.
My smart lights and TV keep resetting during thunderstorms here in Lebanon. Is this a problem with Met-Ed or my house wiring?
This points to transient voltage surges on the Met-Ed grid, which are common with our moderate seasonal thunderstorm risk. While the utility manages large-scale distribution, protection inside your home is your responsibility. These micro-surges can degrade sensitive electronics over time. The solution is a whole-house surge protective device (SPD) installed at your main service panel, which clamps these spikes before they reach your circuits. Supplement this with point-of-use surge strips for critical devices.
We live in the rolling farmland near the valley mall. Could the terrain affect our home’s electrical grounding or power quality?
Yes, the valley’s rolling terrain and soil composition directly impact your grounding system. Effective grounding requires low-resistance contact with the earth, which can be challenging in rocky or variable soils. A poor ground can lead to erratic breaker operation, equipment damage, and increased shock risk. Furthermore, overhead lines running through heavily treed areas in these valleys are more susceptible to wind damage and animal interference, causing flickering or outages. An electrician can test your grounding electrode system for compliance.
How can I prepare my Lebanon home’s electrical system for a summer brownout or an ice storm that knocks out power for days?
Preparation involves both surge protection and backup power. For summer AC peaks that stress the grid, a whole-house SPD safeguards electronics from brownout-related fluctuations. For extended outages from winter ice storms, a permanently installed standby generator with an automatic transfer switch is the most reliable solution. Ensure any portable generator is used outdoors and connected via a listed transfer device to avoid back-feeding deadly power onto Met-Ed’s lines, which is illegal and dangerous.