Top Emergency Electricians in Glenshaw, PA, 15116 | Compare & Call
ARS Rescue Rooter
Questions and Answers
What permits are needed for an electrical panel upgrade in Shaler Township, and who handles that?
All major electrical work, especially a service upgrade, requires a permit from the Shaler Township Building Inspection Department. As a Master Electrician licensed by the Pennsylvania Department of Labor and Industry, I handle the entire permit process, including the required inspections. Our work is performed to the NEC 2020 code, which governs safety standards like AFCI protection and proper grounding, ensuring the upgrade is both safe and legally compliant.
How can I prepare my home's electrical system for an ice storm or a summer brownout?
Preparation focuses on backup power and surge protection. For winter ice storms that threaten extended outages, a properly installed and permitted generator with a transfer switch is critical. Before summer AC season, have your cooling system's electrical connections inspected to prevent overloads during brownouts. A whole-house surge protector is also essential year-round to defend against the power surges that often occur when utility power is restored after an outage.
Does the hilly terrain around here affect my home's electricity?
Yes, Glenshaw's rolling hills and valleys can impact electrical health. Rocky soil, common in this terrain, can challenge the installation of a proper grounding electrode system, which is fundamental for safety. Furthermore, heavy tree canopies in these valleys can cause line interference during storms and increase the risk of falling branches damaging overhead service lines. We perform specific grounding resistance tests and recommend tree trimming near service masts to mitigate these risks.
Why are my lights dimming when my fridge and microwave run in my Glenshaw Highlands home?
Your home's original 1958 electrical system is now 68 years old. Cloth-jacketed copper wiring from that era was not designed for the concurrent loads of modern 2026 appliances, like air fryers and large-screen TVs. The 100-amp service, once considered ample, now operates near its limit, causing voltage drop that manifests as dimming lights. This is a common capacity issue in our neighborhood and often indicates the need for a modern panel and circuit assessment.
My smart TVs and computers keep resetting. Is this a problem with Duquesne Light's power?
Grid fluctuations from Duquesne Light are a likely contributor. Glenshaw has a moderate surge risk from seasonal lightning and routine grid switching. Modern electronics are highly sensitive to these minor voltage variations, which older wiring cannot filter out. Installing a whole-house surge protector at your main panel is the most effective defense, safeguarding your devices from both external surges and internal spikes generated by large appliances cycling on and off.
I have an old Federal Pacific panel and want to add an EV charger. Is my 1958 home's wiring safe for this?
No, it is not currently safe. A Federal Pacific panel is a known fire hazard due to breakers that can fail to trip during an overload. Furthermore, your existing 100-amp service lacks the capacity for a Level 2 EV charger or a modern heat pump. Installing either would require a full service upgrade to 200 amps and the mandatory replacement of the Federal Pacific panel with a listed, modern panel equipped with AFCI breakers for safety.
What should I know about my overhead power line connection?
Your overhead mast service is susceptible to weather and tree damage. The mast where the utility lines connect to your house must be structurally sound; we often see rust or loosening on older installations. It's also the point where Duquesne Light's responsibility ends and your home's wiring begins. We inspect the mast, weatherhead, and service entrance cables for integrity, as any compromise here can lead to water infiltration or a complete service drop failure.
My power is out and I smell something burning, how fast can an electrician get here?
For an emergency like a burning smell, which indicates an active fire hazard, we dispatch immediately. From our starting point near the Glenshaw Library, we take PA-8 directly into the Glenshaw Highlands, typically arriving within 5 to 8 minutes. Our first action is to safely kill power at the meter to stop the hazard, then we diagnose the source, which is often a failing connection at an aging device or within the panel.