Top Emergency Electricians in Edgewood, PA, 15218 | Compare & Call

There are 192 electrician companies server in Edgewood PA

Young Electric Service

Young Electric Service

★★★★★ 5.0 / 5 (2)
2702 Banksville Ave, Pittsburgh PA 15216
Electricians

Young Electric Service is a Pittsburgh-owned and operated electrical company with deep roots in the community. Founded in 1984 by Eddie Young, a master electrician with over four decades of experience...

Renaissance Electric & Power Systems

Renaissance Electric & Power Systems

★★★★★ 5.0 / 5 (3)
370 Castle Shannon Blvd Ste 10396, Pittsburgh PA 15234
Electricians

Renaissance Electric & Power Systems is a full-service electrical contractor serving Pittsburgh, PA, with exceptional quality and value-oriented services for residential, commercial, and industrial cl...

Waldron Electric

Waldron Electric

★☆☆☆☆ 1.1 / 5 (75)
Pittsburgh PA 15236
Electricians, Heating & Air Conditioning/HVAC, Lighting Fixtures & Equipment

Since 1987, Waldron Electric has been a trusted name for Pittsburgh's electrical and HVAC needs, founded by owner Tom Waldron. A PA State Certified Electrical Inspector and a registered city electrici...

Red Beard Electrical

Red Beard Electrical

★★★★★ 5.0 / 5 (4)
Pittsburgh PA 15202
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Red Beard Electrical is a trusted local electrical contractor serving Pittsburgh, PA, and the surrounding areas. We provide reliable residential and commercial electrical solutions, focusing on safety...

Tegge Electrical Services

Tegge Electrical Services

★★★★★ 5.0 / 5 (2)
McKeesport PA 15132
Electricians, Lighting Fixtures & Equipment

Tegge Electrical Services provides reliable electrical solutions for homes and businesses in McKeesport and the greater Pittsburgh area. With over 20 years of experience, our certified, licensed, and ...

Steve the Plumber

Steve the Plumber

★★★★★ 5.0 / 5 (1)
Pittsburgh PA 15221
Plumbing, Handyman, Electricians

I'm Steve, a Pittsburgh-based plumbing, electrical, and handyman specialist serving the East Side and surrounding communities. With eight years dedicated to the plumbing trade, including training unde...

Okot Electric

Okot Electric

★★☆☆☆ 2.0 / 5 (1)
Lower Burrell PA 15068
Electricians, Generator Installation/Repair

Okot Electric is a family-owned, locally operated electrical service provider based in Lower Burrell, PA, serving the community since 2016. We specialize in residential electrical solutions, including...

Carlino Contracting

Carlino Contracting

Pittsburgh PA 15207
Heating & Air Conditioning/HVAC, Electricians, Plumbing

Carlino Contracting is a family-owned and operated business serving Pittsburgh with reliable electrical, plumbing, and HVAC services. We understand the specific challenges of local homes, from overloa...

Volt Electrical Services

Volt Electrical Services

★★★☆☆ 3.0 / 5 (2)
Pittsburgh PA 15216
Electricians

Volt Electrical Services LLC is a trusted Pittsburgh-based electrical contractor dedicated to providing reliable solutions for homes and businesses. Our team of experienced electricians focuses on saf...

McDonald Electric

McDonald Electric

★★★★★ 4.6 / 5 (7)
329 Fort Cherry Rd, Mc Donald PA 15057
Electricians

For over 30 years, McDonald Electric has been the trusted local electrician for homeowners in Mc Donald, PA. As a self-employed specialist, when you call, you know exactly who will be arriving at your...



Estimated Electrical Service Costs in Edgewood, PA

Emergency After-Hours CallEstimated Range
$309 - $414
Electrical Safety InspectionEstimated Range
$134 - $184
EV Charger InstallationEstimated Range
$904 - $1,209
Panel Upgrade (200 Amp)Estimated Range
$3,049 - $4,074
Ceiling Fan InstallationEstimated Range
$269 - $364

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Edgewood. Prices include standard parts and labor adjusted for 2026 economic projections.

Frequently Asked Questions

My smart TV and router keep resetting during Edgewood thunderstorms. Is this a problem with Duquesne Light or my house wiring?

While Duquesne Light manages the grid, our moderate surge risk from seasonal thunderstorms means power quality fluctuations are common. These micro-surges and brief outages are often what reset sensitive electronics. The issue typically originates outside, but without proper whole-house surge protection at your main panel, those surges enter your home. Older wiring and panels offer little to no defense, leaving modern smart home devices vulnerable to damage.

How should I prepare my Edgewood home's electrical system for ice storms and summer brownouts?

Preparing for our 10°F winter lows and peak summer AC demand involves layered protection. For ice storms that can knock out overhead lines, a properly installed and permitted generator interlock kit provides essential backup power. To guard against brownout-related voltage sags and surge damage from summer thunderstorms, installing a Type 1 or Type 2 whole-house surge protector at your main panel is a critical investment to stabilize power and protect appliances.

My power comes in on an overhead mast to my old house. What should I know about this setup?

Your overhead mast service is standard for the area, but its age is a factor. The mast, weatherhead, and service entrance cables are all exposed to the elements and are likely original to the 1938 installation. We inspect these components for weathering, proper sealing, and structural integrity during any assessment. This point of entry is also the ideal location to install a whole-house surge arrester, the first line of defense for your entire electrical system.

I smell burning from an outlet in my Edgewood house. How quickly can an electrician get here?

A burning smell requires immediate attention to prevent an electrical fire. We treat this as a priority dispatch. From our starting point near the Edgewood Towne Centre, we can typically reach most homes in the borough within 5 to 10 minutes via I-376. Your first step is to safely turn off the breaker for that circuit and unplug any devices from the affected outlet until we arrive to diagnose the issue.

My 1938 Edgewood Borough home has original wiring. Why do my lights dim when the refrigerator or microwave turns on?

Homes in Edgewood Borough from 1938 were built for a completely different electrical lifestyle, often using original knob and tube wiring. This 88-year-old system simply wasn't designed for the constant, high-wattage demands of modern 2026 appliances like refrigerators, air conditioners, and home offices. Dimming lights are a clear sign of overloaded circuits and voltage drop, indicating the wiring and 60-amp service are struggling to deliver power safely and consistently to your entire home.

What permits and codes are involved in replacing my old electrical panel in Edgewood?

All major electrical work in Edgewood Borough requires a permit from the Borough Building Code Official and must comply with the current NEC 2023, as enforced by the Pennsylvania Department of Labor and Industry. This isn't just red tape; it ensures the installation is inspected for safety. As a licensed master electrician, I handle the permit application, scheduling of inspections, and ensure the work meets all code requirements for your protection and for insurance purposes.

Could the big, old trees in my hilly Edgewood yard be causing my lights to flicker?

Yes, the hilly terrain and mature tree canopy common near the Edgewood Towne Centre can directly impact electrical health. Tree limbs contacting overhead service drops or primary lines are a frequent cause of flickering lights and intermittent faults. Furthermore, rocky or variable soil conditions on slopes can compromise the connection of your home's grounding electrode system, which is essential for safety and stable voltage, potentially leading to similar symptoms.

I have an old 60-amp panel and want to add a heat pump or EV charger. Is my current electrical system safe for that?

With a 60-amp service from 1938, your system is already operating at its historical limit for basic household loads. Adding a heat pump or Level 2 EV charger demands a significant, dedicated circuit that a 60-amp panel cannot safely provide. Furthermore, if your panel is a Federal Pacific brand, it presents a known fire hazard and must be replaced. A full service upgrade to a modern 200-amp panel is the necessary and code-compliant foundation for these major additions.

Scroll to Top
CALL US NOW