Top Emergency Electricians in Ottawa, OH, 45875 | Compare & Call
County Electric
Frequently Asked Questions
Do I need a permit from the Putnam County Building Department to replace my electrical panel?
Absolutely. A panel replacement is major work that always requires a permit and inspection from the Putnam County Building Department. This ensures the installation complies with the current NEC 2020 code, which governs safety standards. As a Master Electrician licensed by the Ohio Construction Industry Licensing Board (OCILB), I handle securing the permit, performing the work to code, and coordinating the final inspection to close out the job legally and safely.
How do I prepare my home's electrical system for an Ottawa ice storm or a summer brownout?
Preparation focuses on backup power and surge protection. For winter ice storms that can knock out overhead lines, a properly installed and permitted generator with a transfer switch is key. During summer peak AC season, brownouts (low voltage) can stress motors in your fridge or HVAC. Installing a surge protective device (SPD) at your main panel defends electronics against the spikes that often occur when utility power restores after an outage.
I just lost all power in my house and smell something burning. How fast can an electrician get here?
For a burning smell with total power loss, treat it as an urgent safety call. From our central dispatch near the Putnam County Courthouse, we can typically be en route via US-224 and arrive at a Downtown Ottawa residence within 3 to 5 minutes. The priority is to safely de-energize the affected area and locate the source, which is often a failing connection at an outlet or within the panel.
I see the power lines are overhead on a mast at my house. What does that mean for service reliability?
An overhead mast service is standard for many Ottawa homes. It means your electrical connection from AEP Ohio runs via pole-to-house wiring. While cost-effective, this setup is more exposed to weather, ice, and wind than underground service. Ensuring your mast head and weatherhead are secure and watertight is critical to prevent moisture ingress, which can cause corrosion and outages at the service entrance connection point on your roof.
My smart home devices keep resetting and lights flicker. Is this an AEP Ohio grid problem?
It could be a combination. AEP Ohio manages the grid, and our moderate seasonal thunderstorm risk in Ottawa can cause momentary surges or dips in voltage. However, flickering lights often point to a loose connection in your home's wiring, possibly at the main service entrance or within an aging panel. These micro-surges are particularly hard on sensitive smart home electronics, making whole-house surge protection a wise investment.
My Ottawa home was built around 1970. Why are my lights dimming when the new appliances run?
Your electrical system is now 56 years old. Homes in Downtown Ottawa from that era with original NM-B Romex wiring were designed for far fewer devices. Modern 2026 appliance loads, like large refrigerators and air conditioners cycling on, can overwhelm the original circuit capacity, causing voltage drop you see as dimming lights. This is a common sign the system needs a capacity evaluation.
I have an old 100-amp Federal Pacific panel. Can I add a Level 2 EV charger or a heat pump?
No, not safely. A Federal Pacific panel is a known hazard due to faulty breakers that may not trip during an overload, creating a serious fire risk. Beyond that brand issue, a 100-amp service from 1970 lacks the capacity for major new loads like a 240-volt EV charger or a heat pump. Installing either would require a full service upgrade to at least 200 amps and the immediate replacement of the Federal Pacific panel.
We live on the flat plains near the courthouse. Could the soil affect our home's electrical grounding?
Yes, the flat, often damp agricultural soil common in this area is generally favorable for grounding, as it maintains better conductivity. However, the primary concern with this terrain is not soil but the extensive tree root systems and mature trees near overhead service drops. During high winds, limbs can contact lines, causing faults and power fluctuations. It's good practice to keep trees trimmed well clear of the service mast and lines entering your home.