Top Emergency Electricians in Yorktown, NY, 10514 | Compare & Call

There are 197 electrician companies server in Yorktown NY

FN Electrician

FN Electrician

★★★★★ 5.0 / 5 (1)
Bronx NY 10465
Electricians, Lighting Fixtures & Equipment

FN Electrician is a trusted, licensed electrical service provider serving homeowners throughout the Bronx, NY. We specialize in addressing the common and potentially dangerous electrical issues local ...

Solaris Electrical

Solaris Electrical

★★★★★ 5.0 / 5 (2)
Bronxville NY 10708
Electricians

Solaris Electrical is your trusted local electrician serving Bronxville, NY. We specialize in residential and commercial electrical services, from essential repairs to advanced installations. Our team...

Litek Electric

Litek Electric

★★★★★ 4.6 / 5 (10)
2 Reilly Rd, Lagrangeville NY 12540
Lighting Fixtures & Equipment, Electricians, Generator Installation/Repair

At Litek Electric in Lagrangeville, NY, you're dealing directly with the owner—a licensed and insured professional with over 40 years of hands-on experience. This ensures every project, whether a simp...

Dola Electrical Co

Dola Electrical Co

★★★★★ 5.0 / 5 (4)
3044 E Tremont Ave, Bronx NY 10461
Electricians, Lighting Fixtures & Equipment

Dola Electrical Co is a licensed and family-owned electrical contractor proudly serving the Bronx and surrounding communities. With an A+ BBB rating, we've built our reputation on a foundation of qual...

PD Electrical

PD Electrical

Bronx NY 10470
Electricians, Lighting Fixtures & Equipment

PD Electrical is a licensed and insured electrical contractor proudly serving the Bronx and Westchester County. We specialize in both residential and commercial electrical work, providing reliable sol...

Simon and Sons Electric

Simon and Sons Electric

★★★★★ 5.0 / 5 (1)
1757 Crosby Ave, Bronx NY 10461
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Founded on a deep commitment to family and craftsmanship, Simon and Sons Electric has been a trusted name in the Bronx for over 12 years. Our story began with a certified electrician of 45 years who w...

Danmar Electric

Danmar Electric

★★★★★ 4.8 / 5 (24)
New Rochelle NY 10801
Electricians

Danmar Electric has been providing trusted electrical services to the New Rochelle community since 1997. As a licensed and insured electrician, Danmar is known for clean workmanship, conscientious att...

Nie Electric

Nie Electric

★★★★★ 5.0 / 5 (1)
The Bronx NY 10465
Electricians, Lighting Fixtures & Equipment

My name is Nataniel (Nathan), and I've been dedicated to the electrical trade since 2003. After gaining extensive experience working for two established electrical companies, I began offering my exper...

Pace Electric

Pace Electric

★★★★★ 5.0 / 5 (5)
110 4th St, New Rochelle NY 10801
Electricians

Pace Electric has been serving New Rochelle and the surrounding communities since 1993, bringing over three decades of licensed electrical expertise to every project. Our passion for electrical work b...

Lippolis Electric

Lippolis Electric

★★★★★ 4.6 / 5 (9)
25 7th St, Pelham NY 10803
Electricians

For over three decades, Lippolis Electric has been the trusted, family-owned electrical contractor serving Pelham and the tri-state area. Our longevity is built on a genuine commitment to safety, qual...



Estimated Electrical Service Costs in Yorktown, NY

Emergency After-Hours CallEstimated Range
$309 - $419
Electrical Safety InspectionEstimated Range
$134 - $189
EV Charger InstallationEstimated Range
$909 - $1,219
Panel Upgrade (200 Amp)Estimated Range
$3,074 - $4,104
Ceiling Fan InstallationEstimated Range
$269 - $369

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Yorktown. Prices include standard parts and labor adjusted for 2026 economic projections.

Common Questions

What's involved in getting a permit for an electrical panel upgrade from the Yorktown Building Department?

A master electrician licensed by the Westchester County Board of Electrical Examiners will pull all required permits from the Yorktown Building Department. The work must comply with NEC 2020, which includes updated rules for AFCI and GFCI protection. After installation, the work is inspected for compliance. Handling this red tape is our responsibility, ensuring your upgrade is legal, insurable, and safe.

Our smart TVs and computers in Yorktown keep getting glitchy or resetting. Could this be a power issue from Con Edison?

Grid fluctuations from Con Edison, especially during seasonal thunderstorms, are a likely cause. These micro-surges and sags can damage sensitive electronics that older wiring wasn't designed to protect. Installing a whole-house surge protector at your service entrance is the professional solution. It clamps damaging spikes before they reach your appliances, safeguarding your investment.

I have an old Federal Pacific panel and want to install an EV charger. Is my 1969 home's wiring up to the task?

Your Federal Pacific panel is a known fire hazard and must be replaced before any major upgrade. Even with a new panel, that original 100-amp service is insufficient for a Level 2 EV charger, which often requires a 50-amp circuit on its own. Adding a heat pump or other high-demand appliance necessitates a full service upgrade to 200 amps. This provides the modern capacity and safety mandated by current code.

Our house in Shrub Oak was built in 1969. Why do the lights dim when we run the microwave and air conditioner together?

This is a classic sign of an undersized electrical system. Your home's 57-year-old cloth-jacketed copper wiring was installed when a typical load was a few lights and a refrigerator. Modern kitchens and whole-house cooling draw far more amperage, which can overload that original 100-amp service. Upgrading the service panel and modernizing branch circuits with AFCI protection are the most effective ways to resolve this capacity issue and prevent overheating.

Our power comes in on an overhead mast. What specific issues should we watch for with that setup?

Overhead mast service, while common, has specific vulnerabilities. The masthead where the utility drop connects can corrode or loosen over decades. The service cable itself is exposed to weather, tree damage, and animal contact. During a panel upgrade, we always inspect the mast and weatherhead for compliance with current NEC height and clearance rules. Ensuring this entrance equipment is sound prevents water ingress and connection failures.

We have a lot of trees around our house near the Shrub Oak area. Could that be affecting our power quality?

Absolutely. The heavy tree canopy common here causes constant movement and abrasion on overhead service lines, leading to intermittent faults. Branches contacting lines during storms are a frequent outage cause. Furthermore, rocky soil under that canopy can compromise your grounding electrode system's effectiveness, which is vital for surge protection and safety. An electrician should inspect both the masthead connection and ground rod resistance.

We lost power and smell something burning near our panel in Shrub Oak. Who can get here fast?

For a burning smell, immediately shut off the main breaker and call 911. A master electrician licensed in Westchester County can typically dispatch from the Yorktown Heights Business District, using the Taconic State Parkway to reach most Shrub Oak homes within 15 minutes. A rapid response is critical to assess damage to the bus bars or wiring before safely restoring power.

How can we prepare our Yorktown home's electrical system for summer brownouts or winter ice storms?

Summer AC peaks strain the grid, while winter ice can bring down overhead lines. A licensed electrician can install a generator interlock kit on your upgraded panel, allowing safe backup power from a portable generator. Combined with whole-house surge protection, this addresses both brownout reliability and storm-related outages. These upgrades ensure critical systems remain operational.

Scroll to Top
CALL US NOW