Top Emergency Electricians in Syracuse, NY, 13120 | Compare & Call

There are 166 electrician companies server in Syracuse NY

Current Installations

Current Installations

227 N Main St, Minoa NY 13116
Electricians

Current Installations is a trusted electrical contractor serving Minoa and the surrounding communities. With over two decades of experience, we specialize in professional installation and replacement ...

Lasher Electric

Lasher Electric

Moravia NY 13092
Electricians, Generator Installation/Repair

Lasher Electric is a trusted local electrical contractor serving Moravia, NY, and the surrounding Finger Lakes region. We specialize in diagnosing and resolving the common electrical issues that homeo...

Patricia Electric

Patricia Electric

407 Brown Ave, Syracuse NY 13208
Electricians

Patricia Electric is a trusted electrical service provider serving the Syracuse, NY community. We specialize in comprehensive electrical inspections that are crucial for the safety and reliability of ...

Starr Electric

Starr Electric

8280 Kirkville Rd, Kirkville NY 13082
Electricians

Starr Electric has been the trusted electrical service provider for Kirkville and the surrounding communities since 1984, with roots in the trade extending back to 1966. As a locally owned and operate...

The Electric Guy

The Electric Guy

Liverpool NY 13088
Electricians

The Electric Guy is your trusted local electrician serving Liverpool, NY. We specialize in comprehensive electrical inspections, a critical service for area homeowners dealing with common local issues...

J B Brighton Electric Co

J B Brighton Electric Co

5 Adler Dr, East Syracuse NY 13057
Electricians

J B Brighton Electric Co is a trusted local electrician serving East Syracuse, NY, and surrounding areas. With expertise in electrical inspections, installations, repairs, and panel work, they help ho...

Beken Contracting Services

Beken Contracting Services

725 Erie Blvd W, Syracuse NY 13204
Electricians

Beken Contracting Services is a trusted, local electrical contractor serving Syracuse, NY, and surrounding areas. We specialize in professional electrical inspections and repairs, focusing on the comm...

CNY Solar

CNY Solar

2111 Genesee St, Oneida NY 13421
Electricians, Solar Installation

Founded in 2009 by owner Justin Williams, CNY Solar is a NABCEP Certified solar installation company based in Oneida, NY. With a team of over 20 Local IBEW 43 electricians who are experts in the Natio...

Cri Electrical Contractors

Cri Electrical Contractors

RR 20, Manlius NY 13104
Electricians

Cri Electrical Contractors is a trusted, locally-owned electrical service provider in Manlius, NY. We specialize in resolving the specific electrical challenges faced by area homeowners, such as frequ...

Marshall Electric

Marshall Electric

Townline Rd, Scipio Center NY 13147
Electricians, Water Heater Installation/Repair, Septic Services

Marshall Electric has been a trusted name in Scipio Center and the surrounding Auburn and Ithaca areas since 1972. As a full-service contractor, we handle electrical work, plumbing, septic services, w...



Estimated Electrical Service Costs in Syracuse, NY

Emergency After-Hours CallEstimated Range
$294 - $399
Electrical Safety InspectionEstimated Range
$129 - $179
EV Charger InstallationEstimated Range
$869 - $1,164
Panel Upgrade (200 Amp)Estimated Range
$2,929 - $3,914
Ceiling Fan InstallationEstimated Range
$259 - $349

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Syracuse. Prices include standard parts and labor adjusted for 2026 economic projections.

Questions and Answers

My power comes in on an overhead mast to the side of my house. Is this setup outdated or still acceptable?

Overhead mast service is still a standard and acceptable method, but its age is the concern. For a 1947 home, the mast, weatherhead, and service entrance cables are likely original and degraded. They are undersized for a modern service upgrade. National Grid requires these components to meet current specifications before they will reconnect power after a panel change. We handle this coordination, ensuring the mast assembly can support new, larger cables and meets the latest clearance and structural codes.

I lost all power in my house and smell something burning near the panel. How fast can an electrician get to Westcott?

For an emergency like a burning smell, which indicates active overheating, we prioritize immediate dispatch. From a start point near Thornden Park, we can typically be en route via I-81 within minutes, aiming for an 8-12 minute arrival in Westcott. Our first action is to safely secure power at the meter to stop the hazard, then diagnose the failed component—often a failing breaker or connection at a 60-amp panel that's been overloaded.

My lights flicker during storms, and my smart thermostat reset last week. Is this a National Grid problem or something in my house?

Flickering during Syracuse ice storms is often a grid issue, as lines sway or ice causes brief faults. However, a properly protected home should isolate these surges. If your electronics are affected, the problem likely originates inside. An older service without whole-house surge protection at the main panel offers no defense. Transients travel right in, damaging sensitive electronics. We can install a service entrance surge protection device to clamp these voltages before they reach your circuits.

My Westcott home's wiring is from 1947 and my lights dim when I run the microwave. Is this just old wiring or a safety problem?

A 79-year-old electrical system with original knob and tube wiring is a significant safety concern, not just an inconvenience. This wiring lacks a ground wire, which is essential for modern appliances and surge protection. Its insulation becomes brittle over decades, increasing the risk of shorts and fire. These systems were never designed to handle the concurrent load of a 2026 household with computers, high-definition TVs, and multiple kitchen appliances, creating a constant overcurrent hazard.

My home inspector flagged a Federal Pacific Electric panel. Is this really dangerous, and can I add an electric car charger?

Federal Pacific Electric panels have a documented failure rate where breakers may not trip during an overload, creating a serious fire risk. Replacement is strongly advised. Furthermore, a home from 1947 with a 60-amp service cannot safely support a Level 2 EV charger or a modern heat pump system. Both require a service upgrade to at least 200 amps, which also involves replacing the outdated meter socket, service entrance cables, and installing a new panel with AFCI and GFCI protection as required by current code.

How should I prepare my home's electrical system for a -15°F ice storm and potential brownout?

Winter heating surges strain an already marginal 60-amp system. Before a storm, ensure your panel's connections are tight, as thermal cycling can loosen them. For extended outages, a permanently installed generator with a transfer switch is the safest backup; never use a portable generator indoors or through an unapproved inlet. Consider a service upgrade to provide the capacity for safe auxiliary heat. Whole-house surge protection is also critical, as power restoration often creates damaging voltage spikes.

I want to upgrade my electrical panel. What permits are needed from the city, and does the work have to follow the 2020 NEC?

All panel upgrades in Syracuse require a permit from the Department of Neighborhood and Business Development, followed by a rough and final inspection. As a Master Electrician licensed by the New York State Department of State, I pull these permits as part of the job. The work must fully comply with NEC 2020, which mandates AFCI breakers for most living areas, specific grounding and bonding methods, and strict labeling. Handling this compliance and inspection process is a core part of a professional installation, ensuring your system is legal and insurable.

We have huge, old trees near Thornden Park. Could they be causing our intermittent power issues?

The mature tree canopy in Westcott is a common cause of service reliability problems. Branches contacting overhead service drops can cause arcing, noise on the line, and intermittent outages. This interference can also induce voltage fluctuations inside your home. Furthermore, the rolling hills and rocky soil can complicate grounding electrode installation. A proper ground requires driving rods to a specific depth, which may be difficult, making a professional assessment of your grounding system important for safety.

Scroll to Top
CALL US NOW