Top Emergency Electricians in Ronkonkoma, NY, 11779 | Compare & Call

There are 237 electrician companies server in Ronkonkoma NY

Soundview Electrical Contracting

Soundview Electrical Contracting

Miller Place NY 11764
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Soundview Electrical Contracting is a locally owned and operated business serving Miller Place and the surrounding areas. Founded and operated by a Master Electrician with decades of experience dating...

Call Me Electric

Call Me Electric

★★★★★ 5.0 / 5 (7)
381 Sheffield Ave, West Babylon NY 11704
Electricians, Lighting Fixtures & Equipment

Call Me Electric is a family-owned and operated electrical contractor serving Nassau and Suffolk Counties since 1985. Founded by Ralph, who has been in the electrical trade since 1973, the business st...

Owen's Electric

Owen's Electric

67 Pleasant Ave, Centereach NY 11720
Electricians

Since 1986, Owen's Electric has been the trusted electrical service for Suffolk County residents. Based in Centereach, this locally owned and operated business is built on a foundation of reliability ...

AC King LTD

AC King LTD

★★★★☆ 4.0 / 5 (1)
486 Victory Dr, Ronkonkoma NY 11779
Heating & Air Conditioning/HVAC, Electricians, General Contractors

At AC King LTD in Ronkonkoma, our approach is built on a simple, family-first principle: treat every customer's electrical, HVAC, or contracting project as if we were servicing our own home. With 40 y...

E&I Home Restoration

E&I Home Restoration

Brentwood NY 11717
Electricians, Plumbing, General Contractors

E&I Home Restoration is a trusted, full-service remodeling company serving Brentwood, NY, and the surrounding area. Our dedicated team specializes in comprehensive home upgrades, including kitchen and...

Pickney Electric

Pickney Electric

★★★★★ 5.0 / 5 (1)
Farmingdale NY 11735
Electricians

Pickney Electric is a family-owned and operated electrical service proudly serving Farmingdale and the surrounding area since 1985. Founded by Victor Pickney, whose own father was an electrician, the ...

Farmingville Electrical

Farmingville Electrical

640 Horseblock Rd, Farmingville NY 11738
Electricians

Farmingville Electrical is a locally owned and operated electrical service with deep roots in the community. Founded 15 years ago by a licensed electrician with 19 years of experience, the business wa...

RFG Electrical Contracting

RFG Electrical Contracting

★★★★☆ 4.2 / 5 (5)
140 Keyland Ct Ste 17, Bohemia NY 11716
Electricians

RFG Electrical Contracting, established in 1998 by owner and president Richard Galante, is a trusted full-service electrical contractor serving Bohemia and the greater Long Island community. With deca...

Bay Village Electric

Bay Village Electric

★★★★☆ 4.3 / 5 (11)
294 S Bayview Ave, Amityville NY 11701
Electricians

Bay Village Electric is a trusted, locally-owned electrical contractor serving Amityville, NY, and the surrounding communities. We specialize in providing expert electrical inspection services to help...

Robert Selleck Electric

Robert Selleck Electric

44 Raymond St, Islip NY 11751
Electricians

Robert Selleck Electric is a trusted, locally-owned electrical contractor serving the Islip area and broader Suffolk County for over 50 years. As a licensed and insured electrician, Robert brings deca...



Estimated Electrical Service Costs in Ronkonkoma, NY

Emergency After-Hours CallEstimated Range
$359 - $484
Electrical Safety InspectionEstimated Range
$159 - $219
EV Charger InstallationEstimated Range
$1,059 - $1,414
Panel Upgrade (200 Amp)Estimated Range
$3,569 - $4,764
Ceiling Fan InstallationEstimated Range
$314 - $424

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Ronkonkoma. Prices include standard parts and labor adjusted for 2026 economic projections.

FAQs

I just lost all power to half my house and smell something burning. How fast can an electrician get here from the Ronkonkoma LIRR Station area?

For an immediate safety hazard like a burning smell, we treat it as a priority dispatch. From the Ronkonkoma LIRR Station, we can be on the Long Island Expressway in under two minutes, making most homes in Ronkonkoma Central reachable within an 8 to 12 minute window. The first step is to shut off the main breaker at your panel to mitigate fire risk until we arrive.

My home inspection flagged a Federal Pacific panel. Can I still add a Level 2 EV charger or a heat pump to this 100-amp system?

A Federal Pacific panel is a known safety hazard due to faulty breakers that may not trip during an overload, creating a serious fire risk. This panel must be replaced before adding any major load. Even with a new panel, a 100-amp service from 1970 is typically insufficient for a Level 2 EV charger and a modern heat pump simultaneously. A service upgrade to 200 amps is the standard, safe solution for these 2026 electrical demands.

My house in Ronkonkoma Central was built in 1970, and the lights dim when my air conditioner kicks on. Is my wiring just worn out?

Wiring from 1970 is 56 years old. The original NM-B Romex, while safe for its time, was installed for a different standard of living. Modern 2026 appliance loads, from high-efficiency HVAC to kitchen gadgets, demand more stable power than a half-century-old system was designed to deliver. This often shows up as voltage drop, causing lights to dim, rather than the wires being physically degraded.

How should I prepare my Ronkonkoma home's electrical system for summer brownouts or an ice storm that knocks out power for days?

For summer peaks, ensure your air conditioning system is on a dedicated, properly sized circuit to prevent overloads. For extended outages, a permanently installed standby generator with an automatic transfer switch is the most reliable solution. A critical step many overlook is installing a service-rated transfer switch; connecting a portable generator directly to your panel through a dryer outlet is extremely dangerous and illegal, risking backfeed that can electrocute utility workers.

We're on the flat coastal plain near the Ronkonkoma LIRR. Could the soil here affect my home's electrical grounding?

The sandy, well-drained soils common on Long Island's coastal plain can affect grounding electrode resistance. Over decades, metal ground rods can corrode faster, and the soil may not maintain a consistent low-resistance path to earth, which is vital for safety. During a panel inspection or upgrade, we test grounding electrode system resistance and may need to drive additional rods or use a ground plate to meet NEC 2020 requirements for effective fault current dissipation.

I see most houses here have overhead wires coming to a mast on the roof. Does that make my service more vulnerable?

Overhead service masts are standard for Ronkonkoma homes of a certain age. The primary vulnerability isn't the wires themselves, but the mast head and weatherhead where they enter your home. These can be damaged by age, weather, or animal activity, allowing water to seep into your service entrance cables. We also check that the mast is properly secured; a loose mast can strain the connections. Underground services, while less common in these neighborhoods, have their own concerns, like excavation damage or conduit flooding.

I want to upgrade my electrical panel. What permits do I need from the Town of Brookhaven, and does the electrician handle that?

A service upgrade requires a permit from the Town of Brookhaven Building Division and a final inspection. As a Master Electrician licensed by Suffolk County DLC, I pull all necessary permits on your behalf as part of the job. The work must comply with the current NEC 2020 code, which often requires updated grounding and arc-fault protection. Handling this red tape is a core part of my service; you should never hire someone who suggests skipping permits, as it voids insurance and creates safety and resale issues.

Why do my lights flicker and my modem reset during storms? Is this a PSEG Long Island problem or something in my house?

Moderate seasonal thunderstorm activity on Long Island can cause momentary grid disturbances that PSEG manages. However, consistent flickering inside your home often points to a loose connection, either at your service entrance, within your panel, or at a specific circuit. These internal faults are a greater fire risk than utility surges. Whole-house surge protection installed at your panel is also critical to protect sensitive 2026 electronics from transient voltage spikes that do come from the grid.

Scroll to Top
CALL US NOW