Top Emergency Electricians in Rochester, NY, 14602 | Compare & Call

There are 239 electrician companies server in Rochester NY

C & E Electric

C & E Electric

Rochester NY 14615
Electricians, Generator Installation/Repair, Lighting Fixtures & Equipment

C & E Electric, owned and operated by Licensed Master Electrician Colin, brings over a decade of combined industrial, commercial, and residential experience to every job in Rochester. As a fully insur...

Young's Electrical Services

Young's Electrical Services

East Rochester NY 14445
Electricians

Young's Electrical Services is your trusted local electrician in East Rochester, NY, dedicated to ensuring the safety and reliability of your home's electrical system. We understand the unique challen...

Richardson Electric

Richardson Electric

6596 Knickerbocker Rd, Ontario NY 14519
Electricians

Richardson Electric is a trusted local electrical service provider serving Ontario, NY, and the surrounding areas. We specialize in comprehensive electrical inspections and repairs to address common l...

JD Rogers Electric

JD Rogers Electric

Victor NY 14564
Electricians

J.D. Rogers Electric is a family-owned and owner-operated electrical business serving Victor, NY, with over 25 years of industry experience. As an owner-operated company, we maintain high standards th...

E/Z Landscaping and Contracting

E/Z Landscaping and Contracting

Rochester NY 14612
General Contractors, Electricians, Plumbing

E/Z Landscaping and Contracting, based in Rochester, NY, is a trusted local contractor specializing in both outdoor transformations and essential home systems. We bring a practical, skilled approach t...

Kovalsky-Carr Electric Supply Company

Kovalsky-Carr Electric Supply Company

208 Saint Paul St, Rochester NY 14604
Electricians

Kovalsky-Carr Electric Supply Company has been a trusted electrical partner in Rochester since 1921. As a third-generation, family-owned business, we are deeply rooted in the community and understand ...

Radec Electric

Radec Electric

★★★★☆ 3.7 / 5 (3)
100 Rockwood St, Rochester NY 14610
Electricians, Security Systems, Telecommunications

Radec Electric is a Rochester-based electrical contractor with over 35 years of experience serving commercial, industrial, and residential clients throughout New York. As a New York State Registered A...

ARMSTRONG ELECTRIC

ARMSTRONG ELECTRIC

470 Genesee Park Blvd, Rochester NY 14619
Electricians

ARMSTRONG ELECTRIC is a trusted, local electrical contractor serving Rochester, NY, and the surrounding communities. We understand the common electrical challenges faced by area homeowners, such as el...

Little Guy Home Repairs

Little Guy Home Repairs

Rochester NY 14609
Handyman, Electricians, Plumbing

Little Guy Home Repairs is your trusted local handyman, electrician, and plumbing service in Rochester, NY. We specialize in diagnosing and fixing the common electrical issues Rochester homeowners fac...

Solid Remodeling

Solid Remodeling

Brighton NY 14618
Carpenters, Plumbing, Electricians

Hello, I'm Matt, owner of Solid Remodeling in Brighton, NY. For the past 30 years, I've been deeply involved in the building trades, gaining hands-on experience across a wide range of disciplines. My ...



Estimated Electrical Service Costs in Rochester, NY

Emergency After-Hours CallEstimated Range
$359 - $484
Electrical Safety InspectionEstimated Range
$159 - $219
EV Charger InstallationEstimated Range
$1,059 - $1,414
Panel Upgrade (200 Amp)Estimated Range
$3,569 - $4,764
Ceiling Fan InstallationEstimated Range
$314 - $424

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Rochester. Prices include standard parts and labor adjusted for 2026 economic projections.

Question Answers

How should I prepare my Rochester home's electrical system for a severe winter storm and potential outage?

Winter heating surges and sub-zero temperatures strain older systems. Start by having a licensed electrician inspect your service entrance, meter base, and main panel connections for corrosion or looseness. For backup power, a permanently installed generator with an automatic transfer switch is the safest and most reliable option, as it keeps essential circuits like heat and refrigeration running. Never use a portable generator indoors or by connecting it directly to your home's wiring through a dryer outlet, as this creates lethal backfeed hazards.

The lights went out and I smell something burning near my electrical panel. How fast can a master electrician get to me?

For an active electrical emergency like that, we prioritize immediate dispatch. From our central location near Strong Memorial Hospital, we can typically reach Highland Park via I-490 within 8 to 12 minutes. The first step upon arrival is to safely isolate the problem, which often involves turning off the main breaker to prevent further damage or fire risk. We then diagnose the source, which could be a failing breaker, overheated bus bars, or compromised wiring.

We have a 60-amp panel and might want an EV charger or heat pump. Is our old Federal Pacific Electric panel safe for an upgrade?

A 60-amp service and a Federal Pacific Electric panel create two critical barriers. First, the panel capacity is far too low for the continuous load of a Level 2 EV charger or modern heat pump. Second, and more urgently, FPE panels are known for breakers that can fail to trip during an overload, posing a serious fire hazard. Upgrading to a 200-amp service with a new, UL-listed panel and AFCI/GFCI protection is not just recommended; it's a fundamental safety requirement before adding major new loads.

Our power comes in on an overhead mast. What are the common issues with this type of service in the city?

Overhead mast services in Rochester are exposed to the elements, making them vulnerable to weather damage and animal intrusion. The mast itself can loosen or corrode where it enters the roof, leading to water infiltration that rots roof sheathing and damages the meter base. Ice accumulation and high winds can also strain the connections. During a service upgrade to support modern loads, we often recommend evaluating if a switch to a more protected underground service lateral is feasible for your property.

We have huge old trees in our yard near the hospital. Could they be affecting our home's power quality?

The dense urban canopy in areas like Highland Park absolutely impacts electrical health. Tree limbs contacting overhead service lines can cause flickering, intermittent faults, and even start fires. Furthermore, Rochester's clay-heavy soil and rocky glacial till can challenge proper grounding. A poor ground connection means surge protectors and safety systems cannot function correctly. An inspection should evaluate both the clearance of overhead service drops and the integrity of your grounding electrode system.

What permits and inspections are needed for a panel upgrade in Rochester, and does it have to meet the latest code?

All major electrical work in Rochester requires a permit from the City's Bureau of Buildings and Zoning and must be performed by a contractor licensed by the New York State Department of State. The installation must comply with the currently adopted NEC 2020, which mandates AFCI protection for most living areas and specific GFCI requirements. I handle securing the permit, scheduling the rough and final inspections with the city, and ensuring the work passes, so you have a documented, code-compliant system that is safe and insurable.

Our 83-year-old Highland Park home has original knob and tube wiring. Why do the lights dim when we use modern appliances?

Knob and tube wiring installed around 1943 was designed for the electrical loads of that era, like a single radio and a few light bulbs. Today's refrigerators, computers, and air conditioners demand far more current, which the old wiring cannot safely carry. This causes voltage drop, seen as dimming lights, and creates a significant overheating and fire risk. A system this age requires a comprehensive evaluation to bring it up to modern safety codes.

Our smart TVs and routers keep resetting during Rochester ice storms. Is this a problem with RG&E's power or our house wiring?

Seasonal ice storms on the RG&E grid cause voltage fluctuations and minor surges that are tough on sensitive electronics. While the grid is the source, your home's internal wiring and lack of protection are what allow the damage to occur. A whole-house surge protector installed at the main panel is the first line of defense, absorbing those grid-born spikes before they reach your devices. This should be paired with point-of-use protectors for the most valuable equipment to create a layered defense.

Scroll to Top
CALL US NOW