Top Emergency Electricians in Rochester, NY, 14602 | Compare & Call

There are 239 electrician companies server in Rochester NY

Brown H D Electric

Brown H D Electric

4044 Boynton Rd, Walworth NY 14568
Electricians

Brown H D Electric is a trusted, local electrical contractor serving Walworth, NY, and the surrounding area. We specialize in electrical inspections and troubleshooting to address the common issues ho...

Family Owned Electrical Service

Family Owned Electrical Service

Rochester NY 14615
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Family Owned Electrical Service is a locally owned and operated business dedicated to providing reliable electrical solutions for Rochester homes and businesses. We understand the unique challenges po...

AQ Electric

AQ Electric

Irondequoit NY 14617
Electricians

AQ Electric is a trusted, locally-owned electrical contractor serving Irondequoit, NY, and the surrounding communities. We provide comprehensive electrical services for homes and businesses, from esse...

D & D Electric & Controls

D & D Electric & Controls

★★★☆☆ 3.0 / 5 (2)
2804 Doran Rd, Lima NY 14485
Electricians

For over 30 years, D & D Electric & Controls has been the trusted local electrical contractor for Lima and the surrounding area. We take pride in every project, drawing on decades of hands-on experien...

GB Handyman and Property Maintenance

GB Handyman and Property Maintenance

★★★★★ 5.0 / 5 (1)
Hamlin NY 14464
Handyman, Electricians, Plumbing

GB Handyman and Property Maintenance is your trusted local partner in Hamlin, NY, specializing in handyman, electrical, and plumbing services. We understand the common electrical challenges facing our...

Cannizzo Electric

Cannizzo Electric

140 Rose Dust Dr, Rochester NY 14626
Electricians

Cannizzo Electric is a locally owned and operated electrical contractor serving Rochester, Monroe County, and surrounding areas for over three decades. Owner Nick Cannizzo personally supervises and in...

Triple O Heating, Cooling, Electrical & Plumbing

Triple O Heating, Cooling, Electrical & Plumbing

★★★★☆ 3.9 / 5 (15)
6520 N Lk Rd, Bergen NY 14416
Heating & Air Conditioning/HVAC, Electricians, Plumbing

Triple O Heating, Cooling, Electrical & Plumbing is a trusted, family-run business serving Bergen and the surrounding upstate New York communities since 2003. Founded and operated by president Luke Gi...

CX Electric

CX Electric

★★★★★ 5.0 / 5 (1)
Palmyra NY 14522
Electricians, Pool & Hot Tub Service, General Contractors

CX Electric is a trusted, licensed electrical contractor serving the Palmyra community and surrounding areas. We provide a comprehensive range of services for both homes and businesses, focusing on sa...

Grimsley Electric Heating & Cooling

Grimsley Electric Heating & Cooling

★★☆☆☆ 2.0 / 5 (1)
1512 Clifford Ave, Rochester NY 14609
Electricians, Heating & Air Conditioning/HVAC

Grimsley Electric Heating & Cooling is a trusted Rochester, NY, provider specializing in electrical and HVAC services for homes and businesses. We understand the unique challenges local properties fac...

Tele-lite

Tele-lite

80 Lowell St, Rochester NY 14605
Electricians

Tele-Lite has been a trusted manufacturer and distributor in Rochester, NY for over 30 years, primarily serving emergency services with reliable electrical and lighting solutions. As a Honda Power Equ...



Estimated Electrical Service Costs in Rochester, NY

Emergency After-Hours CallEstimated Range
$359 - $484
Electrical Safety InspectionEstimated Range
$159 - $219
EV Charger InstallationEstimated Range
$1,059 - $1,414
Panel Upgrade (200 Amp)Estimated Range
$3,569 - $4,764
Ceiling Fan InstallationEstimated Range
$314 - $424

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Rochester. Prices include standard parts and labor adjusted for 2026 economic projections.

Question Answers

How should I prepare my Rochester home's electrical system for a severe winter storm and potential outage?

Winter heating surges and sub-zero temperatures strain older systems. Start by having a licensed electrician inspect your service entrance, meter base, and main panel connections for corrosion or looseness. For backup power, a permanently installed generator with an automatic transfer switch is the safest and most reliable option, as it keeps essential circuits like heat and refrigeration running. Never use a portable generator indoors or by connecting it directly to your home's wiring through a dryer outlet, as this creates lethal backfeed hazards.

The lights went out and I smell something burning near my electrical panel. How fast can a master electrician get to me?

For an active electrical emergency like that, we prioritize immediate dispatch. From our central location near Strong Memorial Hospital, we can typically reach Highland Park via I-490 within 8 to 12 minutes. The first step upon arrival is to safely isolate the problem, which often involves turning off the main breaker to prevent further damage or fire risk. We then diagnose the source, which could be a failing breaker, overheated bus bars, or compromised wiring.

We have a 60-amp panel and might want an EV charger or heat pump. Is our old Federal Pacific Electric panel safe for an upgrade?

A 60-amp service and a Federal Pacific Electric panel create two critical barriers. First, the panel capacity is far too low for the continuous load of a Level 2 EV charger or modern heat pump. Second, and more urgently, FPE panels are known for breakers that can fail to trip during an overload, posing a serious fire hazard. Upgrading to a 200-amp service with a new, UL-listed panel and AFCI/GFCI protection is not just recommended; it's a fundamental safety requirement before adding major new loads.

Our power comes in on an overhead mast. What are the common issues with this type of service in the city?

Overhead mast services in Rochester are exposed to the elements, making them vulnerable to weather damage and animal intrusion. The mast itself can loosen or corrode where it enters the roof, leading to water infiltration that rots roof sheathing and damages the meter base. Ice accumulation and high winds can also strain the connections. During a service upgrade to support modern loads, we often recommend evaluating if a switch to a more protected underground service lateral is feasible for your property.

We have huge old trees in our yard near the hospital. Could they be affecting our home's power quality?

The dense urban canopy in areas like Highland Park absolutely impacts electrical health. Tree limbs contacting overhead service lines can cause flickering, intermittent faults, and even start fires. Furthermore, Rochester's clay-heavy soil and rocky glacial till can challenge proper grounding. A poor ground connection means surge protectors and safety systems cannot function correctly. An inspection should evaluate both the clearance of overhead service drops and the integrity of your grounding electrode system.

What permits and inspections are needed for a panel upgrade in Rochester, and does it have to meet the latest code?

All major electrical work in Rochester requires a permit from the City's Bureau of Buildings and Zoning and must be performed by a contractor licensed by the New York State Department of State. The installation must comply with the currently adopted NEC 2020, which mandates AFCI protection for most living areas and specific GFCI requirements. I handle securing the permit, scheduling the rough and final inspections with the city, and ensuring the work passes, so you have a documented, code-compliant system that is safe and insurable.

Our 83-year-old Highland Park home has original knob and tube wiring. Why do the lights dim when we use modern appliances?

Knob and tube wiring installed around 1943 was designed for the electrical loads of that era, like a single radio and a few light bulbs. Today's refrigerators, computers, and air conditioners demand far more current, which the old wiring cannot safely carry. This causes voltage drop, seen as dimming lights, and creates a significant overheating and fire risk. A system this age requires a comprehensive evaluation to bring it up to modern safety codes.

Our smart TVs and routers keep resetting during Rochester ice storms. Is this a problem with RG&E's power or our house wiring?

Seasonal ice storms on the RG&E grid cause voltage fluctuations and minor surges that are tough on sensitive electronics. While the grid is the source, your home's internal wiring and lack of protection are what allow the damage to occur. A whole-house surge protector installed at the main panel is the first line of defense, absorbing those grid-born spikes before they reach your devices. This should be paired with point-of-use protectors for the most valuable equipment to create a layered defense.

Scroll to Top
CALL US NOW