Top Emergency Electricians in Edgewood, NM, 87015 | Compare & Call

There are 233 electrician companies server in Edgewood NM

McFall Electric

McFall Electric

★★★★★ 5.0 / 5 (5)
Edgewood NM 87015
Electricians

McFall Electric is a family-owned electrical contractor serving Edgewood, NM, and surrounding areas with over 30 years of local experience. Founded by Fredo McFall in 1981 after his Navy service, the ...

Conway Electric

Conway Electric

★★★☆☆ 3.4 / 5 (5)
567 Comanche Rd NE Ste C, Albuquerque NM 87107
Electricians, Lighting Fixtures & Equipment

Conway Electric is a trusted, family-owned electrical contractor that has been serving Albuquerque, Bernalillo, and surrounding New Mexico communities since 1977. We specialize in a full range of resi...

Above All Quality

Above All Quality

★★★☆☆ 2.8 / 5 (10)
Albuquerque NM 87109
Plumbing, Electricians, Heating & Air Conditioning/HVAC

Above All Quality is a trusted, full-service home solutions provider serving Albuquerque, NM, specializing in plumbing, electrical, and HVAC services. We help local homeowners address common regional ...

SRS Electric

SRS Electric

★★★★★ 5.0 / 5 (5)
1040 Cypress Rd, Bosque Farms NM 87068
Electricians

Founded in 2005 by Steve, SRS Electric brings nearly four decades of experience to every job, with roots in the electrical trade dating back to 1985. Based in Bosque Farms, we’ve grown steadily throug...

First Class Electric

First Class Electric

★★★★★ 5.0 / 5 (3)
3535 Princeton Ave Ste 108, Albuquerque NM 87107
Electricians

First Class Electric is a trusted, locally-owned electrical service provider serving Albuquerque, NM, and the surrounding areas. We specialize in professional electrical inspections and expert repairs...

Zambrano Construction

Zambrano Construction

Albuquerque NM 87112
Handyman, Electricians, Carpenters

Isaac Zambrano of Zambrano Construction brings 25 years of residential remodeling expertise to Albuquerque homeowners. His passion for craftsmanship, honed from the ground up on projects ranging from ...

Ayala Construction

Ayala Construction

★☆☆☆☆ 1.0 / 5 (4)
5048 Edith Blvd NE, Albuquerque NM 87107
General Contractors, Electricians

Ayala Construction is a trusted general contracting and electrical services company serving Albuquerque, NM. We specialize in electrical inspections and repairs, helping homeowners and businesses addr...

Two Skies Electric LLC

Two Skies Electric LLC

Albuquerque NM 87110
Electricians, Solar Installation

Two Skies Electric LLC is a locally-owned electrical and solar installation company serving Albuquerque and throughout New Mexico. Founded by partners David 'Davito' Hammack and Stewart, who bring ove...

Watt Electric

Watt Electric

★★★★☆ 3.7 / 5 (16)
Albuquerque NM 87154
Electricians

Watt Electric is a trusted, family-owned and operated electrical contractor proudly serving Albuquerque and surrounding communities since 2003. Our journey began in the early 1990s when the owner star...

New Mexico Solar and Generator Professionals

New Mexico Solar and Generator Professionals

Albuquerque NM 87193
Solar Installation, Generator Installation/Repair, Electricians

New Mexico Solar and Generator Professionals is a locally owned, woman-owned, and minority-operated business serving Albuquerque since 2006. As a self-performing contractor with GB98, EE98, and MM98 l...



Estimated Electrical Service Costs in Edgewood, NM

Emergency After-Hours CallEstimated Range
$234 - $319
Electrical Safety InspectionEstimated Range
$104 - $144
EV Charger InstallationEstimated Range
$694 - $934
Panel Upgrade (200 Amp)Estimated Range
$2,349 - $3,139
Ceiling Fan InstallationEstimated Range
$204 - $279

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Edgewood. Prices include standard parts and labor adjusted for 2026 economic projections.

Common Questions

My home in Edgewood Estates was built in 1996. Why do my lights dim when the air conditioner kicks on?

Your electrical system is now 30 years old. Homes from that era in Edgewood were typically built with a 150A service and NM-B Romex wiring, which was adequate for the time. Modern loads from multiple computers, large-screen TVs, and kitchen appliances create a cumulative demand that original systems weren't designed for. This can cause voltage drop, manifesting as dimming lights, which indicates your panel's capacity is being stretched.

We have rocky, high desert soil near the Town Center. Could that affect my home's electrical grounding?

Yes, terrain directly impacts grounding effectiveness. Rocky, resistive soil common in Edgewood can make it difficult to achieve a low-resistance ground connection required by code. We often need to use longer grounding rods or multiple rods to reach acceptable levels. A poor ground can lead to erratic appliance operation, damage sensitive electronics, and compromise safety during a fault.

I want to add a Level 2 EV charger and a heat pump. Can my 1996 home's 150A panel handle it?

It depends heavily on your panel's condition and brand. A 150A service can often support these upgrades with proper load calculation and circuit management. However, many homes in Edgewood from the mid-90s still have Federal Pacific panels, which are a known fire hazard and must be replaced before adding any significant load. A full assessment of your existing usage and panel integrity is the essential first step.

My power comes from an overhead line on a mast. What specific maintenance should I be aware of?

Overhead service masts require inspection for weatherhead integrity, mast arm tightness, and clearance from tree branches. High winds in our area can loosen hardware or cause abrasion where the service cable enters the house. You should also visually check for any sagging or damage to the overhead drop from the utility pole. Any issues here are a point of failure for your entire electrical service.

I've lost power and smell something burning near my breaker panel. How fast can an electrician get here?

A burning odor from the panel requires immediate attention. From our dispatch point near the Edgewood Town Center, we can typically be on NM-333 and at your location in Edgewood Estates within 5 to 8 minutes for an emergency call. The priority is to safely disconnect power to assess the fault and prevent an electrical fire before restoring service.

How should I prepare my home's electrical system for Edgewood's summer brownouts and winter ice storms?

For summer peaks, ensure your air conditioning system is on a dedicated, properly sized circuit and consider an energy audit to reduce baseline load. For winter, a professionally installed generator with a transfer switch is the most reliable solution for extended outages. In both seasons, AFCI and GFCI breakers, which are now required, provide vital protection against arc and ground faults that can occur when power fluctuates.

My smart home devices keep resetting during storms. Is this a problem with PNM's power or my house?

This is likely a combination of both. The PNM grid in our high desert area is prone to lightning-induced surges and momentary outages. While the utility manages the main lines, protecting your sensitive electronics is your responsibility. Whole-house surge protection installed at the service entrance is a critical defense, as standard power strips cannot handle the magnitude of surges common here.

Do I need a permit from the Town of Edgewood to replace my old breaker panel?

Absolutely. Any panel replacement or major service upgrade requires a permit from the Town of Edgewood Building Department and must be inspected. The work must comply with the 2023 NEC and be performed by a contractor licensed by the New Mexico Construction Industries Division. This process ensures the installation is safe, properly documented for future homeowners, and meets current fire prevention standards.

Scroll to Top
CALL US NOW