Top Emergency Electricians in Rolling Fork, MS, 39159 | Compare & Call

There are 209 electrician companies server in Rolling Fork MS

Round 'Da House

Round 'Da House

★★★★★ 5.0 / 5 (1)
367 Red Eagle Cir, Ridgeland MS 39157
Handyman, Electricians, General Contractors

Round 'Da House has been a trusted fixture in the Ridgeland community since 2005, providing reliable home repair and remodeling services. As a fully licensed and insured contractor, we bring peace of ...

NB Service Pro

NB Service Pro

Florence MS 39073
Electricians, Generator Installation/Repair, Lighting Fixtures & Equipment

NB Service Pro is a Florence-based electrical company owned and operated by Nick Bailey. With 13 years of experience across industrial, commercial, residential, and oil field projects—both offshore an...

Lavallee Electrical Services

Lavallee Electrical Services

103 E Leake St, Clinton MS 39056
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Paul Lavallee is the licensed Master Electrician and owner behind Lavallee Electrical Services in Clinton. A true community builder, Paul's passions extend from the electrical panel to the concert hal...

Electric Pro

Electric Pro

PO Box 7090, Jackson MS 39282
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Electric Pro is a Jackson-based electrical service company dedicated to keeping homes and businesses safe and powered up. We specialize in solving common local electrical issues, such as damage from s...

Jay’s Electric

Jay’s Electric

Clinton MS 39056
Electricians

Jay's Electric is a trusted, local electrical contractor serving homeowners throughout Clinton, MS. We understand the specific challenges faced in our community, including water intrusion in outlets a...

Rials Services

Rials Services

★★★★★ 5.0 / 5 (1)
6077 Highway 18, Utica MS 39175
Electricians, Lighting Fixtures & Equipment

Rials Services Inc. is a family-owned and -operated electrical company proudly serving Utica and the broader Central Mississippi-Louisiana area since 2017. With over two decades of combined experience...

BAC Mechanical Services

BAC Mechanical Services

★★★★★ 5.0 / 5 (1)
Brookhaven MS 39601
Heating & Air Conditioning/HVAC, Plumbing, Electricians

BAC Mechanical Services is a trusted, full-service provider for Brookhaven residents and businesses, offering comprehensive solutions in HVAC, plumbing, and electrical work. Our approach is built on s...

Elcon Electrical Contractors

Elcon Electrical Contractors

★★★★★ 5.0 / 5 (1)
160 Value Rd, Brandon MS 39042
Electricians

Elcon Electrical Contractors is a trusted, locally-owned electrical service based in Brandon, MS. We specialize in professional electric inspections to diagnose and resolve the common electrical issue...

Nevels Electric

Nevels Electric

★★★★☆ 4.3 / 5 (6)
20 Valley Dr, Pearl MS 39208
General Contractors, Electricians

Nevels Electric is a trusted electrical service provider serving the Pearl community and the broader regions of Mississippi, Louisiana, and Alabama. We offer a comprehensive range of residential and c...

Handy I Faceco

Handy I Faceco

Jackson MS 39209
Handyman, Electricians, Plumbing

Handy I Faceco is a locally owned handyman, electrical, and plumbing service based in Jackson, MS. With a journey that began in technical schools and spans over 16 years of hands-on experience across ...



Estimated Electrical Service Costs in Rolling Fork, MS

Emergency After-Hours CallEstimated Range
$234 - $319
Electrical Safety InspectionEstimated Range
$104 - $144
EV Charger InstallationEstimated Range
$689 - $924
Panel Upgrade (200 Amp)Estimated Range
$2,334 - $3,119
Ceiling Fan InstallationEstimated Range
$204 - $279

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Rolling Fork. Prices include standard parts and labor adjusted for 2026 economic projections.

Question Answers

Can my 1979 home with a 100-amp panel safely add an EV charger or a new heat pump?

Safely adding a Level 2 EV charger or a modern heat pump to a 1979-era 100-amp panel is very difficult and typically requires a service upgrade. These high-demand appliances need dedicated circuits and significant capacity your current panel lacks. Furthermore, if your home has a Federal Pacific panel—a common and recalled hazard from that era—it must be replaced immediately before any new load is considered.

Why do my lights dim when the AC kicks on in my Rolling Fork Historic District home?

Homes built around 1979, like many here in Rolling Fork, have original NM-B Romex wiring that is now 47 years old. This wiring and the standard 100-amp service were designed for far fewer appliances than a modern 2026 household uses. Dimming lights often indicate the electrical system is overloaded and struggling to supply your air conditioner, refrigerator, and electronics simultaneously, a common sign an upgrade is needed.

Are my smart devices at risk from Entergy's power surges here in Rolling Fork?

Yes, the Entergy Mississippi grid in our area experiences high surge risk from frequent lightning. These voltage spikes can easily bypass basic power strips and damage sensitive smart home electronics, TVs, and computers. Installing a whole-house surge protector at your main panel is a critical defense to absorb these grid disturbances and protect your investment.

Does the flat Delta land near the courthouse affect my home's electrical grounding?

The flat, often moist soil of the Mississippi Delta can actually provide excellent conditions for a solid grounding electrode system, which is crucial for safety. However, high water tables can also accelerate corrosion on underground grounding rods over decades. For homes with original 1979 wiring, we recommend testing the grounding system to ensure it still provides a low-resistance path to earth, as required by code.

What should I know about my overhead power service coming into my historic district home?

Overhead service, common here, brings power via a mast on your roof to the meter. This exposed section is vulnerable to storm damage and requires proper masthead and weatherhead installation to prevent water intrusion. Any repair or upgrade to this service entrance cable must be permitted through the Sharkey County Building Department and executed by a licensed electrician to ensure it meets current NEC 2020 clearance and safety standards.

My power is out and I smell something burning, who can get here fast?

For an emergency like a burning smell with a power loss, safety is the priority. Our trucks are dispatched from near the Sharkey County Courthouse and use US Highway 61 for quick access across the Delta. You can expect a licensed electrician on-site within 3 to 5 minutes to assess the hazard and secure your home.

How should I prepare my home's electrical system for Mississippi Delta ice storms and summer brownouts?

Delta winters can bring ice storms that knock out power, while summer AC use strains the grid. For ice storms, a properly installed and permitted generator with a transfer switch provides essential backup. For summer brownouts, whole-house surge protection guards against voltage drops that can harm appliances. Ensuring your service mast and overhead connections are secure is also key preparation for severe weather.

Do I need a permit from the county to replace my old electrical panel?

Yes, replacing a service panel always requires a permit from the Sharkey County Building Department. This ensures the work is inspected for compliance with the NEC 2020, which is Mississippi's adopted code. As a Master Electrician licensed by the Mississippi State Board of Contractors, I handle the entire permit process, from application to final inspection, so your upgrade is fully legal and documented for safety and future home sales.

Scroll to Top
CALL US NOW