Top Emergency Electricians in Edina, MN, 55305 | Compare & Call

There are 224 electrician companies server in Edina MN

Erickson Plumbing, Heating, Air, Electrical

Erickson Plumbing, Heating, Air, Electrical

★★★★☆ 3.8 / 5 (25)
1471 92nd Ln NE, Blaine MN 55449
Plumbing, Electricians, Heating & Air Conditioning/HVAC

For over 40 years, Erickson Plumbing, Heating, Air, Electrical has been a trusted, family-owned resource for Blaine residents. Licensed, bonded, and insured, our team of NATE-certified technicians pro...

Anvalang Home Services

Anvalang Home Services

★★★★☆ 4.1 / 5 (8)
Lakeville MN 55044
Handyman, Plumbing, Electricians

Anvalang Home Services is a licensed handyman company serving Lakeville, MN and the Twin Cities area. We specialize in comprehensive home improvement solutions, including plumbing, electrical work, an...

K & S Heating, Air Conditioning, Plumbing & Electrical

K & S Heating, Air Conditioning, Plumbing & Electrical

★★☆☆☆ 1.5 / 5 (50)
4205 Us-14 W, Rochester MN 55901
Plumbing, Electricians, Heating & Air Conditioning/HVAC

K&S Heating, Air Conditioning, Plumbing & Electrical has been a trusted Rochester home service provider since 1988. Founded with just eight employees, the company has grown to a team of over 60 skille...

Hawkins Electric

Hawkins Electric

Blaine MN 55014
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Hawkins Electric is a licensed and insured electrical service provider based in Blaine, MN, specializing in residential and commercial electrical solutions. With expertise in electric inspections, ins...

Finch Home Solutions

Finch Home Solutions

★★★☆☆ 2.8 / 5 (11)
590 Citation Dr Ste H, Shakopee MN 55379
Electricians, Lighting Fixtures & Equipment

Finch Home Solutions is a locally owned and operated electrical company serving Shakopee and the broader Twin Cities Metro since 2017. Founded with a small-town dedication to honest work, we bring ove...

O'Neill Electric

O'Neill Electric

6143 Osgood Ave N, Stillwater MN 55082
Electricians

Founded in 2016 by President Daniel O'Neill, O'Neill Electric brings over 17 years of industry experience to Stillwater and the wider Twin Cities Metro. As a licensed, bonded, and insured electrical c...

Kilowatt Electric

Kilowatt Electric

★★★★★ 5.0 / 5 (1)
Shakopee MN 55379
Electricians

Kilowatt Electric is a trusted residential electrical service provider in Shakopee, MN, with over 20 years of local experience. We specialize in ensuring the safety and efficiency of your home's elect...

Advantage Electric

Advantage Electric

★★★★☆ 3.8 / 5 (13)
9257 W River Rd, Minneapolis MN 55444
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Advantage Electric is a locally owned and operated electrical service provider serving Minneapolis, St. Paul, and surrounding suburbs. Founded in 1988, our team of experienced, licensed electricians s...

Bantz Family Construction Remodel & Repair

Bantz Family Construction Remodel & Repair

★★★★★ 5.0 / 5 (3)
Jordan MN 55352
Electricians, General Contractors

Bantz Family Construction Remodel & Repair is a trusted local contractor serving Jordan, MN, specializing in both electrical work and general construction. As a family-owned business, we understand th...

Revelation Electric

Revelation Electric

★★★★★ 5.0 / 5 (2)
Eagan MN 55123
Electricians

Revelation Electric is a residential electrical service company serving Eagan, MN, and surrounding areas. Founded in 2023 by owner-operator Branden, the business brings years of hands-on experience to...



Estimated Electrical Service Costs in Edina, MN

Emergency After-Hours CallEstimated Range
$339 - $459
Electrical Safety InspectionEstimated Range
$149 - $204
EV Charger InstallationEstimated Range
$999 - $1,339
Panel Upgrade (200 Amp)Estimated Range
$3,374 - $4,504
Ceiling Fan InstallationEstimated Range
$299 - $404

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Edina. Prices include standard parts and labor adjusted for 2026 economic projections.

Questions and Answers

What permits and codes are involved if I upgrade my electrical panel in Edina?

All panel upgrades in Edina require a permit from the City of Edina Building Inspections Division and must be performed by a licensed Master Electrician, as regulated by the Minnesota Department of Labor and Industry. The work will be inspected to comply with the 2023 National Electrical Code (NEC), which mandates modern safety devices like AFCI breakers. Handling this red tape and ensuring code compliance is a fundamental part of our service.

My Morningside home's lights dim when the fridge or AC kicks on. Is my old wiring the problem?

Your 1969 electrical system is 57 years old. The original cloth-jacketed copper wiring was rated for the loads of its era, but modern appliances like induction cooktops and HVAC systems draw significantly more power. This can cause voltage drop, seen as dimming lights, and the insulation on that old wiring becomes brittle over time. Upgrading the wiring and service panel addresses the capacity and safety limitations inherent in a mid-century system.

The power went out and I smell something burning near my panel. How fast can an electrician get here?

A burning smell indicates an active electrical fault that requires immediate attention. From a starting point like Centennial Lakes Park, a service vehicle can typically reach any Morningside address via MN-62 in 8 to 12 minutes for an emergency dispatch. The priority is to safely isolate the problem at the main breaker to prevent a fire before a technician performs a full diagnostic.

How can I prepare my home's electrical system for a severe Edina winter with potential ice storms?

Winter lows near -20°F and ice storms strain the entire grid, leading to brownouts or extended outages. Beyond a surge protector, consider a permanently installed standby generator with an automatic transfer switch. This ensures your heating system, sump pump, and refrigeration remain operational. An electrical inspection can verify your service mast and meter base are secure against heavy ice loads.

My smart TV and computer keep resetting during storms. Is this an issue with Xcel Energy's power?

Xcel Energy's grid in Edina faces moderate surge risk from seasonal lightning and severe storms. These voltage spikes can easily damage sensitive electronics that older wiring systems were not designed to protect. A whole-house surge protector installed at your main service panel is the most effective defense, absorbing those external surges before they reach your outlets and devices.

We have a lot of tall trees around our house near Centennial Lakes. Could that affect our electricity?

The heavy tree canopy common in this area can directly impact electrical health. Branches contacting overhead service lines cause interference, flickering, and outage risks. Furthermore, mature tree root systems and the associated soil conditions can compromise the integrity of your home's underground grounding electrode system, which is critical for safety during a lightning strike or fault.

My power comes from an overhead line to a mast on my roof. What are the main things I should watch for?

Overhead service masts, standard for 1969 construction, are exposed points of failure. Inspect the mast for rust, ensure it is firmly anchored to the structure, and check that the service entrance cables are not frayed. The clearance from the mast to any tree limbs should be at least 10 feet. During heavy snow or ice events, these components bear the full weight, making their condition a top priority.

I have a 100-amp panel and want to add an EV charger. Is my current electrical setup safe for that?

A standard 100-amp service from 1969 cannot safely support a Level 2 EV charger, which alone requires a 40-60 amp circuit. More critically, we must check the panel brand; many Morningside homes of that era have Federal Pacific panels, which are known for faulty breakers that fail to trip during overloads, creating a serious fire hazard. Installing a modern heat pump or EV charger first requires a panel replacement and likely a full service upgrade to 200 amps.

Scroll to Top
CALL US NOW