Top Emergency Electricians in Temple Hills, MD, 20744 | Compare & Call

There are 141 electrician companies server in Temple Hills MD

A&K Melgar Electric

A&K Melgar Electric

★★★★★ 5.0 / 5 (1)
Laurel MD 20708
Electricians

A&K Melgar Electric is a trusted electrical service provider serving Laurel, MD and surrounding communities. With expertise in both residential and commercial electrical work, we offer comprehensive s...

Stephen Palmer Electric, Inc

Stephen Palmer Electric, Inc

★★★★☆ 4.0 / 5 (16)
10514 Detrick Ave, Kensington MD 20895
Electricians

Founded by Stephen Palmer in 1995, this Kensington-based electrical company brings decades of expertise to every job. Starting as an apprentice in 1979 and managing a large local firm before launching...

Dynamo Electric

Dynamo Electric

★★★★★ 5.0 / 5 (6)
1018 Roxleigh Rd, Towson MD 21286
Electricians, Lighting Fixtures & Equipment, General Contractors

Founded and operated by Master Electrician Kenny Daniels (License #10154), Dynamo Electric has been a trusted electrical partner for Towson and the Greater Baltimore area since 2004. Kenny, a local re...

Julien Property Solutions

Julien Property Solutions

Hyattsville MD 20781
Plumbing, Electricians, Interior Design

Julien Property Solutions is a trusted provider of residential and commercial property services in Hyattsville, Maryland, and throughout the DC area. We specialize in plumbing, electrical work, interi...

J and Son Electric

J and Son Electric

Beltsville MD 20705
Electricians, Lighting Fixtures & Equipment

J and Son Electric is a trusted, locally owned and operated electrical company based in Beltsville, MD, serving Washington DC and surrounding Maryland communities. We provide a full spectrum of reside...

Silco Electric

Silco Electric

★★★★★ 4.6 / 5 (43)
6151 Executive Blvd, Rockville MD 20852
Electricians, Lighting Fixtures & Equipment, TV Mounting

Silco Electric has been a trusted electrical service provider in the Washington DC Metropolitan area since 2007. Founded by a lifelong Montgomery County resident, the company is deeply rooted in the R...

Gerson Electrician

Gerson Electrician

★★★★★ 4.6 / 5 (17)
Hyattsville MD 20783
Electricians, Lighting Fixtures & Equipment, EV Charging Stations

Gerson Electrician is a licensed electrical service provider based in Hyattsville, MD, with over four years of experience serving the local community. Specializing in residential electrical work, the ...

Wilcox Electric

Wilcox Electric

★★★★★ 4.7 / 5 (157)
Hyattsville MD 20781
Electricians

Wilcox Electric has been serving the Hyattsville community since 1989, evolving from a home-based business to a full-service electrical contractor. Founded and led by Master Electrician Steve Wilcox, ...

Alpha Power Electric

Alpha Power Electric

★★★★★ 5.0 / 5 (4)
Mount Rainier MD 20712
Electricians

Alpha Power Electric is a trusted electrical contractor serving Mount Rainier, MD, and surrounding communities. We specialize in comprehensive electrical services for homeowners, addressing common loc...

Lee Contracting

Lee Contracting

★★★★★ 5.0 / 5 (2)
4471 Nicole Dr Unit L, Lanham MD 20706
Electricians

Lee Contracting has been serving the Lanham community with reliable electrical services since 2011. As a licensed electrical and general contractor, we provide comprehensive solutions for both residen...



Estimated Electrical Service Costs in Temple Hills, MD

Emergency After-Hours CallEstimated Range
$264 - $359
Electrical Safety InspectionEstimated Range
$114 - $159
EV Charger InstallationEstimated Range
$784 - $1,049
Panel Upgrade (200 Amp)Estimated Range
$2,639 - $3,529
Ceiling Fan InstallationEstimated Range
$234 - $314

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Temple Hills. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

How can I prepare my home's electrical system for a winter ice storm or a summer brownout?

For winter, ensure your heating system's circuit is properly maintained and consider a hardwired backup generator with a transfer switch—portable units are risky if not installed correctly. For summer, managing your 100-amp panel's load is key to avoiding overloads during heat waves. Installing that whole-house surge protector also guards against spikes when power is restored after an outage, which is a common failure point for appliances.

My inspector flagged my Federal Pacific panel. Can I just add a 240V outlet for an EV charger?

No, adding a Level 2 EV charger is not advisable with that setup. Federal Pacific panels have a known failure risk and should be replaced immediately for safety. Furthermore, a 1975-era 100-amp service lacks the spare capacity for a charger's 30-50 amp continuous draw. A full service upgrade to 200 amps is the necessary first step to safely support an EV charger or a modern heat pump system.

What's involved in replacing the mast and meter on my house with the overhead power lines?

Replacing an overhead mast and meter base is a coordinated process. As the master electrician, we handle all on-house work: installing the new weatherhead, mast, conduit, and meter socket to current NEC 2023 and local code. We then secure the required permit from Prince George's County and coordinate the utility disconnect and reconnect with Pepco. You'll be without power for the duration of the utility's work, which we schedule to minimize inconvenience.

Why do my lights dim when my newer refrigerator kicks on in my 1975 Hillcrest Heights home?

Your home's original NM-B Romex wiring is now over 50 years old. While the cable itself is safe if undisturbed, the 100-amp service panel it connects to was sized for far fewer appliances than a modern 2026 household demands. That refrigerator, along with computers, large-screen TVs, and other electronics, creates a cumulative load that can cause voltage drops, manifesting as dimming lights. It's a sign the system is operating at its original capacity.

I smell something burning from an outlet—how fast can an electrician get to Temple Hills?

For a burning smell, which indicates an active fire hazard, treat it as an emergency and call 911 first. For a master electrician, we can typically dispatch a truck from near the Temple Hills Community Center. Using I-495, we can reach most Hillcrest Heights addresses within 10 to 15 minutes to secure the circuit and diagnose the fault before it escalates.

Could the rolling, tree-heavy landscape near the community center affect my home's power quality?

Yes, the rolling suburban terrain and mature tree canopy common in this area directly impact electrical health. Overhead service lines can be susceptible to interference from swaying branches, causing minor flickers. More critically, rocky or variable soil conditions can challenge the grounding electrode system, which is vital for safety and surge dissipation. A professional can test your ground resistance to ensure it meets NEC standards.

Do I really need a permit just to replace a few old outlets in Prince George's County?

Yes, permits are required for most electrical work beyond like-for-like bulb or plug replacement. The Prince George's County Department of Permitting, Inspections, and Enforcement enforces this to ensure all work meets the adopted NEC 2023 code for safety and insurance validity. As a licensed master electrician with the Maryland Board of Electricians, I manage the permit process, schedule inspections, and provide the final certification that protects your home's value and safety.

My smart TV and router keep getting reset after Pepco power flickers in summer storms.

Pepco's overhead infrastructure in our area is exposed to Maryland's moderate-to-high surge risk from seasonal thunderstorms. A simple power strip won't protect sensitive electronics from these voltage spikes. You need a whole-house surge protector installed at your main service panel. This device arrests major surges at their entry point, providing a foundational layer of protection that your individual plug-in devices rely on.

Scroll to Top
CALL US NOW