Top Emergency Electricians in Annapolis, MD, 21401 | Compare & Call

There are 184 electrician companies server in Annapolis MD

New City Electric

New City Electric

★★☆☆☆ 2.0 / 5 (4)
Columbia MD 21044
Electricians

New City Electric was founded in Columbia, MD, by a master electrician whose career began over 40 years ago as an overhead lineman for BGE. After earning his license, he launched the business in 2011,...

Optimum Vast Electric

Optimum Vast Electric

2218 Harford Rd, Baltimore MD 21218
Electricians, Lighting Fixtures & Equipment

Optimum Vast Electric is your local Baltimore electrical expert, founded by Master Electrician Sean Richard. After 36 years in the trade, including 22 as a master electrician and time at BGE, Sean sta...

C&R Electric

C&R Electric

★★★★★ 5.0 / 5 (3)
7602 Energy Pkwy Ste 9, Baltimore MD 21226
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

For over 25 years, C&R Electric has been the trusted local electrical contractor for homes and businesses across the Greater Baltimore and Annapolis area. Founded in 1997, we are a full-service, licen...

VAR Electric

VAR Electric

★★★★★ 4.7 / 5 (12)
Takoma Park MD 20912
Electricians, Lighting Fixtures & Equipment

VAR Electric has been a trusted electrical service provider in Takoma Park, MD, for over 15 years, specializing in both residential and commercial electrical needs. Our team offers comprehensive servi...

McKoy & Sons

McKoy & Sons

★★★★★ 5.0 / 5 (6)
Nottingham MD 21236
Electricians

McKoy & Sons is a trusted, family-run electrical service provider proudly serving Nottingham, MD, and the surrounding communities. We specialize in a comprehensive range of residential and commercial ...

Weisman Electric Company

Weisman Electric Company

★★★☆☆ 2.6 / 5 (18)
42 Hudson St Ste 102, Annapolis MD 21401
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Weisman Electric Company is a family-owned and operated electrical contractor deeply rooted in Annapolis, MD, with a history spanning nearly 40 years. Founded by Tom and Maureen Weisman, the business ...

S.R. Aquino Electric & Alarm

S.R. Aquino Electric & Alarm

★★★★★ 5.0 / 5 (1)
6655 Dobbin Rd Ste F, Columbia MD 21045
Electricians, Security Systems

Founded in 1983 and based in Columbia, MD, S.R. Aquino Electric & Alarm is a veteran-owned business built on a foundation of military-grade expertise. Owner and Master Electrician Steve Aquino learned...

C & A Electric

C & A Electric

★★★★★ 4.5 / 5 (17)
4208 48th St, Bladensburg MD 20710
Electricians, Fire Protection Services, Security Systems

C & A Electric is a family-owned and operated electrical, fire protection, and security contractor serving the metropolitan area, including Bladensburg, since 1977. We are a licensed and bonded resour...

Corb Electric

Corb Electric

Windsor Mill MD 21244
Electricians, Lighting Fixtures & Equipment

Corb Electric, LLC is a family-owned electrical service provider in Windsor Mill, MD, founded by an uncle and nephew team dedicated to offering a reliable, quality-focused alternative for local electr...

MFZ Air conditioning, Plumbing & Heating

MFZ Air conditioning, Plumbing & Heating

★★★★★ 5.0 / 5 (4)
8149 Solley Rd, Pasadena MD 21122
Heating & Air Conditioning/HVAC, Plumbing, Electricians

MFZ Air Conditioning, Plumbing & Heating is a second-generation, family-owned company that has been serving the Pasadena, MD community and surrounding Anne Arundel County since 1978. With over five de...



Estimated Electrical Service Costs in Annapolis, MD

Emergency After-Hours CallEstimated Range
$294 - $399
Electrical Safety InspectionEstimated Range
$129 - $179
EV Charger InstallationEstimated Range
$869 - $1,164
Panel Upgrade (200 Amp)Estimated Range
$2,929 - $3,914
Ceiling Fan InstallationEstimated Range
$259 - $349

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Annapolis. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

My Historic District home has overhead wires coming to a mast on the roof. What are common issues with this setup?

Overhead service masts are standard but face unique wear. The mast itself can be vulnerable to storm damage or ice load. More commonly, the point where the service entrance cables enter the masthead can degrade, allowing moisture infiltration that damages wiring inside the attic. We also inspect the mast's structural integrity, especially on older homes, to ensure it can safely support the utility's service drop cables in high winds.

My Annapolis Historic District home was built around 1975. Why are my lights dimming when I use new appliances?

Your electrical system is 51 years old. The original NM-B Romex wiring and 100-amp service panel were designed for a different era. Modern loads from air conditioners, computers, and high-wattage appliances exceed the intended capacity of that era's design, causing voltage drop and strain on aging connections. This is a common challenge in historic homes where preserving aesthetics must be balanced with essential safety upgrades.

I have an old Federal Pacific panel and want to add an EV charger. Is my 1975-era 100-amp service enough?

No, it is not. A Federal Pacific panel is a known fire hazard and should be replaced regardless of other plans. Adding a Level 2 EV charger or a modern heat pump to a 100-amp service from 1975 is typically not feasible. These high-demand appliances usually require a 200-amp service upgrade to operate safely without overloading your system. The project starts with replacing the hazardous panel and evaluating your home's total electrical needs.

How should I prepare my Annapolis home's electrical system for summer brownouts or winter ice storms?

Summer AC peaks strain the grid, and winter ice can bring down lines. For brownouts, ensure your HVAC system is serviced and consider a hard-wired surge protector to guard against low-voltage damage. For extended outages, a properly installed generator with a transfer switch is the safest solution. Never use a portable generator indoors or connect it directly to your home's wiring through a receptacle, as this creates lethal backfeed hazards.

What permits and codes apply to a major electrical upgrade in my Annapolis historic home?

All major work requires a permit from the Annapolis Department of Planning and Zoning, with special considerations often needed for historic properties. As a Maryland State Board of Master Electricians licensee, I ensure the installation meets or exceeds NEC 2020 standards, which is the current enforced code. Handling this red tape is part of our service; we pull permits, schedule inspections, and provide the documentation you need for your records and any future sale.

There's a burning smell from my outlet in Annapolis. How fast can an electrician get here?

For an immediate fire hazard, we prioritize dispatch. From a central point near the Maryland State House, our vans can typically reach most addresses in the Historic District within 5 to 8 minutes using US-50 and local routes. Turn off power at the breaker to the affected circuit if it is safe to do so, and evacuate the area around the outlet. A burning odor indicates active overheating and requires urgent professional intervention.

We live on the flat coastal plain near the State House. Could the soil affect our home's electrical grounding?

Yes, soil conditions directly impact grounding. The moist, sandy soil common in Annapolis can be corrosive to underground grounding electrodes over decades. A poor ground connection compromises the safety of your entire system, preventing breakers from tripping correctly during a fault. During a panel upgrade or service evaluation, we test the grounding electrode system's resistance and may need to supplement or replace rods to meet NEC 2020 standards.

My smart home devices keep resetting during Annapolis thunderstorms. Is this a BGE grid problem?

Seasonal thunderstorms in our area create a moderate surge risk on the BGE grid. While the utility manages large-scale distribution, the final protection of your electronics is your responsibility. Voltage spikes can travel through wiring and damage sensitive circuitry in computers, TVs, and smart home hubs. Installing a whole-house surge protector at your main panel is the most effective defense, supplementing any plug-in strips you may already use.

Scroll to Top
CALL US NOW