Top Emergency Electricians in Annapolis, MD, 21401 | Compare & Call

There are 184 electrician companies server in Annapolis MD

Cook Electric

Cook Electric

★★★★★ 4.6 / 5 (7)
2130 Renard Ct, Annapolis MD 21401
Lighting Fixtures & Equipment, Electricians, Fire Protection Services

Since 1988, Cook Electric has been the trusted local electrical contractor for Annapolis, MD. As a fully licensed and insured team, we provide dependable electrical solutions for homes and businesses,...

Foster Electrical Services

Foster Electrical Services

★★★★★ 5.0 / 5 (11)
Crofton MD 21114
Electricians

Foster Electrical Services is a Crofton-based electrical company founded by a master electrician with over 30 years of experience in the DMV area. Our team brings expertise from apprenticeship program...

DKK Reid electric

DKK Reid electric

★★★★★ 5.0 / 5 (2)
Upper Marlboro MD 20772
Electricians

DKK Reid Electric is a trusted, locally-owned electrical contractor serving Upper Marlboro, MD, and the surrounding communities. We specialize in a full range of residential electrical services, from ...

Anchor Electric

Anchor Electric

★★★☆☆ 3.0 / 5 (4)
Annapolis MD 21401
Lighting Fixtures & Equipment, Electricians

Anchor Electric is a trusted Annapolis electrical service company dedicated to ensuring the safety and reliability of your home's electrical system. We understand that local homes can face issues like...

Gunther's Electric

Gunther's Electric

★★★★★ 5.0 / 5 (4)
620 Wye Mills Rd, Queenstown MD 21658
Electricians

Gunther's Electric is a trusted family-owned electrical service provider in Queenstown, MD, with deep roots in the community since 1961. Founded by Gunther and Regina Schiwy, the business is now opera...

Park Electric

Park Electric

★★★★★ 5.0 / 5 (1)
Severna Park MD 21146
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Park Electric is a family-owned and operated electrical service provider based in Severna Park, MD, dedicated to serving the local community with reliable and professional electrical solutions. Specia...

Kent Island Electric

Kent Island Electric

★★★☆☆ 3.0 / 5 (2)
621 Victoria Dr Ste 300, Stevensville MD 21666
Electricians

Kent Island Electric is a Stevensville-based electrical company owned and operated by a master electrician and licensed electrical inspector. With over 15 years of average client tenure, the business ...

Moonlight Electric

Moonlight Electric

★★★★★ 5.0 / 5 (3)
Cape Saint Claire MD 21012
Electricians, Lighting Fixtures & Equipment

Moonlight Electric is a Cape Saint Claire-based electrical service founded in 2021 by two experienced electricians who previously worked for a large Annapolis-area contractor. Frustrated by high price...

Taylor Charles C III Elec Contr

Taylor Charles C III Elec Contr

★★★★★ 5.0 / 5 (1)
165 Defense Hwy, Annapolis MD 21401
Doctors, Electricians

Taylor Charles C III Elec Contr is a trusted electrical contractor serving Annapolis, MD, with expertise in both residential and commercial electrical systems. Specializing in comprehensive electrical...

Just N Time Electric

Just N Time Electric

Edgewater MD 21037
Lighting Fixtures & Equipment, Electricians

Just N Time Electric is a trusted, veteran-owned electrical service based in Edgewater, MD. Founded in 2018 by Justin Gardner, a former US Army serviceman and union electrician with IBEW Local 26, the...



Estimated Electrical Service Costs in Annapolis, MD

Emergency After-Hours CallEstimated Range
$294 - $399
Electrical Safety InspectionEstimated Range
$129 - $179
EV Charger InstallationEstimated Range
$869 - $1,164
Panel Upgrade (200 Amp)Estimated Range
$2,929 - $3,914
Ceiling Fan InstallationEstimated Range
$259 - $349

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Annapolis. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

My Historic District home has overhead wires coming to a mast on the roof. What are common issues with this setup?

Overhead service masts are standard but face unique wear. The mast itself can be vulnerable to storm damage or ice load. More commonly, the point where the service entrance cables enter the masthead can degrade, allowing moisture infiltration that damages wiring inside the attic. We also inspect the mast's structural integrity, especially on older homes, to ensure it can safely support the utility's service drop cables in high winds.

My Annapolis Historic District home was built around 1975. Why are my lights dimming when I use new appliances?

Your electrical system is 51 years old. The original NM-B Romex wiring and 100-amp service panel were designed for a different era. Modern loads from air conditioners, computers, and high-wattage appliances exceed the intended capacity of that era's design, causing voltage drop and strain on aging connections. This is a common challenge in historic homes where preserving aesthetics must be balanced with essential safety upgrades.

I have an old Federal Pacific panel and want to add an EV charger. Is my 1975-era 100-amp service enough?

No, it is not. A Federal Pacific panel is a known fire hazard and should be replaced regardless of other plans. Adding a Level 2 EV charger or a modern heat pump to a 100-amp service from 1975 is typically not feasible. These high-demand appliances usually require a 200-amp service upgrade to operate safely without overloading your system. The project starts with replacing the hazardous panel and evaluating your home's total electrical needs.

How should I prepare my Annapolis home's electrical system for summer brownouts or winter ice storms?

Summer AC peaks strain the grid, and winter ice can bring down lines. For brownouts, ensure your HVAC system is serviced and consider a hard-wired surge protector to guard against low-voltage damage. For extended outages, a properly installed generator with a transfer switch is the safest solution. Never use a portable generator indoors or connect it directly to your home's wiring through a receptacle, as this creates lethal backfeed hazards.

What permits and codes apply to a major electrical upgrade in my Annapolis historic home?

All major work requires a permit from the Annapolis Department of Planning and Zoning, with special considerations often needed for historic properties. As a Maryland State Board of Master Electricians licensee, I ensure the installation meets or exceeds NEC 2020 standards, which is the current enforced code. Handling this red tape is part of our service; we pull permits, schedule inspections, and provide the documentation you need for your records and any future sale.

There's a burning smell from my outlet in Annapolis. How fast can an electrician get here?

For an immediate fire hazard, we prioritize dispatch. From a central point near the Maryland State House, our vans can typically reach most addresses in the Historic District within 5 to 8 minutes using US-50 and local routes. Turn off power at the breaker to the affected circuit if it is safe to do so, and evacuate the area around the outlet. A burning odor indicates active overheating and requires urgent professional intervention.

We live on the flat coastal plain near the State House. Could the soil affect our home's electrical grounding?

Yes, soil conditions directly impact grounding. The moist, sandy soil common in Annapolis can be corrosive to underground grounding electrodes over decades. A poor ground connection compromises the safety of your entire system, preventing breakers from tripping correctly during a fault. During a panel upgrade or service evaluation, we test the grounding electrode system's resistance and may need to supplement or replace rods to meet NEC 2020 standards.

My smart home devices keep resetting during Annapolis thunderstorms. Is this a BGE grid problem?

Seasonal thunderstorms in our area create a moderate surge risk on the BGE grid. While the utility manages large-scale distribution, the final protection of your electronics is your responsibility. Voltage spikes can travel through wiring and damage sensitive circuitry in computers, TVs, and smart home hubs. Installing a whole-house surge protector at your main panel is the most effective defense, supplementing any plug-in strips you may already use.

Scroll to Top
CALL US NOW