Top Emergency Electricians in Uxbridge, MA, 01516 | Compare & Call

There are 168 electrician companies server in Uxbridge MA

Corrao Electric

Corrao Electric

★★★★★ 5.0 / 5 (5)
Taunton MA 02780
Electricians, Lighting Fixtures & Equipment, General Contractors

Corrao Electric is a family-owned and operated electrical service provider serving Taunton and the wider Southeastern Massachusetts region. Founded and led by Master Electrician Kenny Corrao, who brin...

Senna Electrical Solutions

Senna Electrical Solutions

★★★★★ 5.0 / 5 (1)
Milford MA 01757
Electricians

Senna Electrical Solutions is your trusted local electrician in Milford, MA, dedicated to resolving the common electrical issues faced by homeowners. We understand that flickering lights and power sur...

Perry Electric Service

Perry Electric Service

★★★★★ 5.0 / 5 (20)
Methuen MA 01844
Electricians

Perry Electric Service is your Methuen-based, licensed electrical partner, dedicated to powering homes and businesses safely and efficiently. We specialize in installing and servicing Electric Vehicle...

Jason Howell Electrician

Jason Howell Electrician

202 Richardson Rd, Fitchburg MA 01420
Electricians, Lighting Fixtures & Equipment

Serving Fitchburg and the surrounding area, Jason Howell Electrician is a locally owned and operated business built on over ten years of hands-on electrical experience. As an employee-owned company, e...

Gerhard Fandreyer Electrical Services

Gerhard Fandreyer Electrical Services

★★★★★ 5.0 / 5 (2)
Phillipston MA 01331
Electricians

Gerhard Fandreyer Electrical Services is a trusted, licensed electrician serving Phillipston and the surrounding region since 1990. With Master Electrician licenses in Massachusetts, New Hampshire, an...

John Richardson Journeyman Electrician is a trusted local electrical service provider based in Athol, MA, specializing in residential electrical inspections and repairs. Many Athol homeowners face com...

J.J. Galvin Electrical

J.J. Galvin Electrical

★★★☆☆ 2.5 / 5 (20)
164 Adams St, Newton MA 02458
Electricians

For over 30 years, J.J. Galvin Electrical has been a trusted local resource for homeowners and businesses in Newton and throughout Massachusetts. Founded in 1985, this family-owned, licensed electrica...

Kevin Ferstler

Kevin Ferstler

★★★★★ 5.0 / 5 (4)
Boston MA 02132
Electricians

Kevin Ferstler is a fully licensed and insured electrician serving the Boston and South Shore area. With years of hands-on experience in both residential and commercial electrical work, Kevin is a tru...

Erick J Piepiora Electrician

Erick J Piepiora Electrician

Ashburnham MA 01430
Electricians, Lighting Fixtures & Equipment, Solar Installation

Erick J Piepiora Electrician is a trusted local electrical contractor serving Ashburnham, MA, and surrounding areas. With expertise in electrical repairs, installations, and solar solutions, we help h...

P&M Electric Group

P&M Electric Group

Framingham MA 01702
Electricians

P&M Electric Group provides comprehensive electrical services to Framingham homeowners. We focus on safety and reliability, ensuring your home's electrical system operates efficiently to save you mone...



Estimated Electrical Service Costs in Uxbridge, MA

Emergency After-Hours CallEstimated Range
$294 - $399
Electrical Safety InspectionEstimated Range
$129 - $179
EV Charger InstallationEstimated Range
$874 - $1,169
Panel Upgrade (200 Amp)Estimated Range
$2,944 - $3,934
Ceiling Fan InstallationEstimated Range
$259 - $354

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Uxbridge. Prices include standard parts and labor adjusted for 2026 economic projections.

Frequently Asked Questions

What if I lose all power or smell something burning in my house? How fast can an electrician get to me near the Uxbridge Town Common?

For a true emergency like a burning smell or total power loss, we dispatch immediately. From a central starting point like the Town Common, we use Route 146 to reach most Uxbridge homes within 5-8 minutes. Our first priority is to secure the scene, disconnect any immediate hazard at the meter, and then diagnose the panel or wiring fault.

I have an old Federal Pacific panel and want to add an EV charger. Is my 100-amp service from 1976 even safe for that?

A Federal Pacific panel presents a known fire hazard and should be replaced regardless of your plans. Adding a Level 2 EV charger or a modern heat pump to a 1976-era 100-amp service is not feasible—it requires a full service upgrade to 200 amps. We must first replace the dangerous panel with a modern, code-compliant one, then upgrade the service entrance conductors and meter base to support the new load.

My lights dim when the fridge or microwave kicks on in my Uxbridge Center home. Is this normal for a house built around 1976?

For a system now 50 years old, it's a common sign of capacity strain. Original 100-amp panels with NM-B Romex wiring were designed for fewer, lower-power appliances than we use today. Modern high-draw devices like air fryers and tankless water heaters can overload these legacy circuits, causing voltage drops you notice as dimming lights.

How can I prepare my home's electrical system for a winter ice storm and potential brownout?

Winter heating surges and ice storms stress both the grid and your home's electrical system. Beyond a whole-house surge protector, consider a professionally installed manual transfer switch and generator. This setup allows you to safely back up essential circuits like heat, refrigeration, and sump pumps during an outage, without the danger of back-feeding power onto National Grid's lines.

My power comes in on an overhead mast to the house. What are the main things I should watch for with that setup?

Overhead service masts are common here. Inspect where the mast enters your roof for signs of water infiltration or corrosion. Also, check the clearance between the service drop wires and any tree branches—maintaining a 3-foot clearance is crucial for safety and reliability. We often see wear on the weatherhead or mast base after 50 years, which can allow moisture into your panel.

If I upgrade my electrical panel, what permits are needed from the Uxbridge Building Department, and who handles that?

Any service upgrade or panel replacement requires a permit from the Uxbridge Building Department and a subsequent inspection. As a licensed Master Electrician credentialed by the Massachusetts Board, I manage the entire permit process for you. All work must comply with the current NEC 2023 code, which includes specific requirements for AFCI protection and grounding that your original 1976 system lacks.

We have a lot of trees and rocky soil on our property near the Common. Could that affect our home's electrical health?

Absolutely. The dense woodlands and rolling hills around Uxbridge mean tree limbs often interfere with overhead service drops, especially during storms. Rocky soil can compromise your grounding electrode system, which is critical for safety. We test ground rod resistance and may need to drive additional rods or use chemical ground enhancement to achieve a low-resistance path to earth, as required by code.

My smart lights and TV flicker during storms. Is this a problem with National Grid or my own house wiring?

Flickering during ice storms often points to grid disturbances from National Grid, which are common in our area. However, your home's internal wiring and lack of whole-house surge protection can leave sensitive electronics vulnerable. Installing a service entrance surge protector at your panel is a critical first defense, as it clamps utility-side surges before they enter and damage your equipment.

Scroll to Top
CALL US NOW