Top Emergency Electricians in Saugus, MA, 01906 | Compare & Call

There are 188 electrician companies server in Saugus MA

Prevett Electric

Prevett Electric

★★★★☆ 4.3 / 5 (6)
26 Lake St, Norfolk MA 02056
Electricians, Lighting Fixtures & Equipment, EV Charging Stations

Prevett Electric has been the trusted electrical contractor in Norfolk for over four decades. As a locally owned and operated company, we provide reliable electrical services for both homes and busine...

J&A Electric

J&A Electric

★☆☆☆☆ 1.0 / 5 (1)
Danvers MA 01923
Electricians

J&A Electric is a trusted local electrician serving Danvers, MA, with comprehensive electrical services for homes and businesses. We specialize in addressing common local electrical challenges, such a...

Systems Electrical Services Co, Inc

Systems Electrical Services Co, Inc

★★★★★ 5.0 / 5 (2)
387 Prospect Pl, Revere MA 02151
Electricians

Systems Electrical Services Co, Inc. is a trusted, family-owned electrical contractor serving the Revere community and beyond since 1985. With over three decades of specialized experience, the company...

Gallant Electric

Gallant Electric

★★★★☆ 3.6 / 5 (8)
North Billerica MA 01862
Electricians

For over three decades, Gallant Electric has been a trusted, family-operated electrical contractor serving North Billerica and the surrounding communities. Fully licensed and insured since 1991, our t...

Shanafelt and Martino Electric

Shanafelt and Martino Electric

★★★★☆ 4.4 / 5 (15)
403 Somerville Ave, Somerville MA 02143
Electricians

Shanafelt and Martino Electric is a trusted local electrical service in Somerville, MA, with over a decade of combined experience working for both independent projects and large corporations. As a ful...

Handyman Projects

Handyman Projects

Revere MA 02151
Plumbing, Electricians, Handyman

Handyman Projects provides reliable plumbing and electrical services for homes and businesses in Revere, MA. We focus on delivering personalized, safe solutions, from routine inspections to addressing...

Ten Hills Electricians

Ten Hills Electricians

181 Middlesex Ave, Winter Hill MA 02145
Electricians

Ten Hills Electricians is a family-owned and operated electrical service based right in Winter Hill, Somerville. We've been serving our neighbors throughout Middlesex County for over a decade, buildin...

Fabiano Caravalho

Fabiano Caravalho

Everett MA 02149
Electricians

Fabiano Caravalho is a licensed electrician serving Everett, Massachusetts, and the surrounding area since 2016. With expertise in both high and low voltage systems, we handle a wide range of electric...

Matthew DeCicco Electric

Matthew DeCicco Electric

★★★★★ 5.0 / 5 (1)
North Reading MA 01864
Electricians

Matthew DeCicco Electric is a trusted, owner-operated electrical service serving North Reading and the surrounding communities. As a local business, we build our reputation on close customer relations...

One Stop Electricians

One Stop Electricians

★☆☆☆☆ 1.0 / 5 (1)
149 Main St, Woburn MA 01801
Electricians

One Stop Electricians in Woburn, MA is a locally owned and operated electrical service provider dedicated to serving the Woburn community and Middlesex County. As licensed and insured professionals, w...



Estimated Electrical Service Costs in Saugus, MA

Emergency After-Hours CallEstimated Range
$339 - $454
Electrical Safety InspectionEstimated Range
$149 - $204
EV Charger InstallationEstimated Range
$994 - $1,329
Panel Upgrade (200 Amp)Estimated Range
$3,354 - $4,479
Ceiling Fan InstallationEstimated Range
$294 - $399

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Saugus. Prices include standard parts and labor adjusted for 2026 economic projections.

Frequently Asked Questions

We live on a rocky hillside near Breakheart Reservation. Could that affect our home's electrical grounding?

Yes, the rocky soil common in our area poses a significant challenge for achieving a low-resistance grounding electrode system. Proper grounding is non-negotiable for safety, as it provides a path for fault current and stabilizes voltage. Rocky, dry soil requires specialized installation techniques, often involving longer ground rods or multiple rods to reach conductive earth. An improperly grounded system on this terrain can lead to erratic equipment operation and reduce the effectiveness of surge protection.

Why do my lights flicker and my modem reset during storms here in Saugus?

Flickering during storms points to grid disturbances from National Grid. Saugus experiences moderate surge risk, particularly from seasonal ice storms that can cause tree contact and voltage fluctuations on overhead lines. These micro-outages and power surges are hard on modern smart home electronics and computers. Installing a whole-house surge protector at your main panel is a highly recommended defense, as it clamps these transient voltages before they can damage sensitive equipment downstream in your home.

My Saugus Center home was built in 1960 and the lights dim when my AC kicks on. Is the wiring just worn out?

With a 66-year-old system, age is a significant factor. Your home's original cloth-jacketed copper wiring has served well, but its insulation can become brittle and degrade. More critically, homes from that era were not designed for the simultaneous load of a modern kitchen, central air, and multiple electronics. The 100-amp service, once considered ample, is now the bare minimum and struggles with 2026's appliance demands, often causing voltage drops that manifest as dimming lights.

My power comes from an overhead line to a mast on my roof. What are the common issues with this setup?

Overhead service, while common in Saugus, is exposed to the elements. The mast and weatherhead can be damaged by falling limbs, especially during ice storms, potentially pulling the service conductors loose. It's important to keep the area around the mast clear of tree growth. We also inspect the mast's structural integrity during a service upgrade, as older masts may not be rated to support the heavier gauge wires required for a modern 200-amp service entrance.

How should I prepare my home's electrical system for a Saugus winter with ice storms and heating surges?

Winter preparedness starts with ensuring your heating system's electrical circuits are in good condition, as they will be under sustained load. Consider having your panel and connections inspected for signs of heat stress or corrosion. For extended outages common during ice storms, a properly installed generator with a transfer switch is a reliable solution. This also protects you from the brownout conditions that can occur during peak heating demand, which can damage compressor motors in appliances like refrigerators and furnaces.

What permits and codes are involved if I need to replace my electrical panel in Saugus?

All panel replacements require a permit from the Saugus Building Department and must be performed by an electrician licensed by the Massachusetts Board of State Examiners. The work will be inspected to ensure it complies with the current NEC 2023, which mandates AFCI and GFCI protection in many areas not required decades ago. As the master electrician on the project, I handle pulling the permit, scheduling inspections, and ensuring the installation meets all state and local amendments for a final sign-off.

I smell something burning from an outlet and my power is out. How fast can an electrician get to my home near Breakheart Reservation?

A burning smell indicates an active fault that requires immediate attention. For a home near Breakheart, a qualified electrician can typically dispatch from town and be on-site within 8-12 minutes via US Route 1. Your first step should be to shut off the breaker for that circuit at the main panel if it is safe to do so. This prevents the situation from escalating while you wait for professional help to diagnose and repair the overheated connection or failing device.

I have an old 100-amp Federal Pacific panel and want to add an electric car charger. Is this even possible?

A Federal Pacific panel presents a primary safety concern, as these are known for faulty breakers that may not trip during an overload, creating a serious fire risk. Beyond that, adding a Level 2 EV charger to a 100-amp service from 1960 is not feasible. The charger alone can draw 40-50 amps, which would overload your existing capacity. A full service upgrade to a modern 200-amp panel with AFCI protection is the necessary and code-compliant first step to safely support an EV charger or a modern heat pump system.

Scroll to Top
CALL US NOW