Top Emergency Electricians in Quincy, FL, 32351 | Compare & Call

Quincy Electricians Pros

Quincy Electricians Pros

Quincy, FL
Local Services

Phone : (888) 903-2131

Don’t wait—get emergency electrical repair in Quincy, state-short from trained, licensed pros.
FEATURED

There are 48 electrician companies server in Quincy FL

Truevolt Electrical Services

Truevolt Electrical Services

★★★★☆ 4.3 / 5 (6)
4786 Woodlane Cir Ste A, Tallahassee FL 32303
Electricians, Lighting Fixtures & Equipment

Truevolt Electrical Services is a licensed electrical contractor (Florida License Number: EC13011010) serving Tallahassee since 2017. Founded by William Hearn after 15 years of comprehensive training ...

Albritton Electrical Service

Albritton Electrical Service

★★★★★ 4.5 / 5 (14)
4821 Six Oaks Dr, Tallahassee FL 32303
Electricians

Albritton Electrical Service is a family-owned electrical contractor serving Tallahassee and surrounding areas with over 35 years of experience. Licensed in Florida, Georgia, and Alabama, they provide...

Weston Trawick

Weston Trawick

★★★★★ 5.0 / 5 (3)
5392 Tower Rd, Tallahassee FL 32303
Electricians

Weston Trawick Electrical Contracting has been a trusted name in Tallahassee and the surrounding North Florida and South Georgia region since 1983. As a licensed electrical contractor, we provide comp...

A+ Electrical Contractors

A+ Electrical Contractors

★★★★★ 5.0 / 5 (3)
956 Yulee St, Tallahassee FL 32304
Electricians

A+ Electrical Contractors is a family-owned, licensed electrical contractor serving Tallahassee, Leon County, Gadsden County, Jefferson County, and Wakulla County. Founded by Rafael "Ralf" Frias (Lice...

Chad O'Hara's Quality Electrical Services, Inc.

Chad O'Hara's Quality Electrical Services, Inc.

★★★★★ 5.0 / 5 (1)
656 Capital Cir NE Ste F, Tallahassee FL 32301
Electricians

Chad O'Hara's Quality Electrical Services, Inc. is a locally owned and operated electrical contracting business serving Tallahassee and surrounding areas. Founded by Chad O'Hara, a Florida state-certi...

Mathers Electric

Mathers Electric

★☆☆☆☆ 1.0 / 5 (2)
4834 Corlett St, Tallahassee FL 32303
Electricians

For over three decades, Mathers Electric has been the trusted, family-owned electrical contractor for Tallahassee homes and businesses. As a fully licensed, bonded, and insured company, we provide a c...

Corbin Systems

Corbin Systems

★★★★★ 5.0 / 5 (2)
2834 Remington Green Cir, Tallahassee FL 32308
Security Systems, Home Automation, Electricians

Corbin Systems is a family-owned, local business with deep roots in Tallahassee. Established in 2011, the company is run by the Corbin family, who were born and raised here, giving them a genuine unde...

Northeast Electrical

Northeast Electrical

7061 John Wayne Ct, Tallahassee FL 32305
Electricians

Northeast Electrical, LLC is a Tallahassee-based electrical contractor dedicated to serving the specific needs of our community. Our team of licensed and skilled electricians focuses on delivering rel...

Seti One General Repairs

Seti One General Repairs

★★★☆☆ 3.0 / 5 (2)
Chattahoochee FL 32324
Electricians

Seti One General Repairs is a trusted, locally-owned electrical service provider serving Chattahoochee, Florida, and the surrounding communities. We specialize in a comprehensive range of residential ...

Fraser Electric

Fraser Electric

★★★★☆ 4.4 / 5 (7)
6995 Proctor Rd, Tallahassee FL 32309
Electricians

Founded in 1996 by Master Electrician Robert E. Fraser Jr., Fraser Electric is a locally-owned and operated Tallahassee staple. Robert's journey began in Tallahassee after his family settled here in 1...

« PreviousPage 1 of 5Next Page »


Estimated Electrical Service Costs in Quincy, FL

Emergency After-Hours CallEstimated Range
$214 - $294
Electrical Safety InspectionEstimated Range
$94 - $134
EV Charger InstallationEstimated Range
$639 - $854
Panel Upgrade (200 Amp)Estimated Range
$2,154 - $2,879
Ceiling Fan InstallationEstimated Range
$189 - $259

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Quincy. Prices include standard parts and labor adjusted for 2026 economic projections.

Frequently Asked Questions

My Quincy home was built in the 1970s. Why do my lights dim when I run the microwave and air conditioner at the same time?

Homes in Downtown Quincy from 1973 have original 12-gauge NM-B Romex wiring, which is now over 50 years old. While the copper itself can last, the system was designed for a much lower appliance load than a modern 2026 household demands. Simultaneous use of high-draw devices like AC and microwaves can overload a single circuit, causing voltage drop and dimming lights. This is a clear sign your 100-amp service panel is struggling with today's electrical consumption.

My power comes in on an overhead line to a mast on my roof. What are the common issues with this setup?

Overhead service masts, common in Quincy, are exposed to the elements. High winds can strain connections, and heavy accumulations of leaves or pine needles in the roof valley near the mast can create a fire risk. The mast itself must be properly secured and rated for the service cable; older installations may be undersized or corroded, requiring reinforcement or replacement during a service upgrade.

My smart TV and modem keep getting fried during storms. Is this a problem with the City of Quincy's power grid?

Quincy's high lightning activity means the local grid experiences frequent voltage surges that utility-level equipment can't always suppress. These spikes travel directly into your home, destroying sensitive electronics. Installing a whole-house surge protector at your main service panel is the most effective defense, creating a barrier to protect your smart home devices from these external grid events.

I want to upgrade my electrical panel. What permits do I need from Gadsden County, and does the work have to be to the latest code?

All panel replacements in Gadsden County require a permit from the Building Department and a final inspection. The work must comply with the current Florida-adopted NEC 2023, which mandates AFCI protection for most living area circuits. As a Master Electrician licensed by the Florida DBPR, I handle the permit paperwork and ensure the installation meets all safety and legal requirements, so you don't have to navigate the red tape.

My power is out and I smell something burning near my electrical panel. How fast can a master electrician get here?

For an emergency like a burning smell, our priority dispatch from near Quincy City Hall typically puts us on-site in Downtown Quincy within 5-8 minutes. We use I-10 for the fastest route. A burning odor indicates an active fault, such as overheating wires or a failing breaker, which requires immediate shutdown and professional diagnosis to prevent a fire.

We have a lot of tall trees around our house near downtown. Could that be causing our intermittent power or flickering lights?

Yes, the dense canopy and rolling hills around Downtown Quincy directly impact electrical health. Tree limbs contacting overhead service lines can cause flickering, and root systems in the rocky soil can disturb grounding electrode conductors, compromising your home's critical safety path to earth. An inspection should check both the service mast clearance and the integrity of your grounding system.

How can I prepare my home's electrical system for a summer brownout or a rare winter ice storm in Quincy?

For summer brownouts, ensure your HVAC system is on a dedicated, properly sized circuit and consider a hard-wired surge protector to handle voltage fluctuations. For winter preparedness, a licensed electrician can install a manual transfer switch for a generator, providing safe backup power for essentials without back-feeding dangerous voltage onto the grid, which protects utility line workers.

I have an old Federal Pacific panel and want to install a heat pump. Is my 100-amp service in my 1970s home safe for this upgrade?

Combining a Federal Pacific panel with a new heat pump installation is a significant safety concern. Federal Pacific panels are known for faulty breakers that can fail to trip during an overload, creating a fire hazard. Furthermore, a 100-amp service from 1973 often lacks the spare capacity for a heat pump's high starting current. A full service upgrade to 200 amps and panel replacement is almost always required for both safety and reliable operation.

Scroll to Top
CALL US NOW