Top Emergency Electricians in Broadview Park, FL, 33317 | Compare & Call

There are 238 electrician companies server in Broadview Park FL

Santana Proz Electric & Lighting

Santana Proz Electric & Lighting

★★★★★ 5.0 / 5 (7)
1225 Riverside Dr, Coral Springs FL 33071
Electricians, Lighting Fixtures & Equipment, General Contractors

Santana Proz Electric & Lighting is a trusted, licensed, and insured electrical and contracting service proudly serving the Coral Springs community. We prioritize safety and take genuine pride in deli...

T-Volt

T-Volt

★★★★☆ 3.7 / 5 (6)
3808 Davie Blvd, Fort Lauderdale FL 33312
Electricians, General Contractors

Founded in 1983, T-Volt Inc. is a family-owned and operated electrical contracting company serving Fort Lauderdale and the surrounding communities. As a master electrical contractor, we are fully lice...

DGD Electric

DGD Electric

★☆☆☆☆ 1.0 / 5 (1)
Sunrise FL 33323
Electricians, Lighting Fixtures & Equipment

DGD Electric LLC is a licensed and insured electrical service provider based in Sunrise, FL, specializing in both residential and commercial electrical repairs, upgrades, and installations. With a foc...

MG Electric

MG Electric

★★★★☆ 4.0 / 5 (4)
Lauderhill FL 33313
Electricians, Lighting Fixtures & Equipment

MG Electric, Inc. is a trusted, licensed electrical service provider serving the Lauderhill community. Our local electricians specialize in a comprehensive range of services, including thorough electr...

Priority One Electrical Services

Priority One Electrical Services

★★★★☆ 3.7 / 5 (3)
Fort Lauderdale FL 33312
Electricians

Priority One Electrical Services is a Fort Lauderdale-based electrician dedicated to keeping local homes safe and powered. We specialize in addressing the unique electrical challenges faced by coastal...

Jarrett Electric Company

Jarrett Electric Company

★☆☆☆☆ 1.0 / 5 (1)
729 N Victoria Park Rd, Fort Lauderdale FL 33304
Electricians

Jarrett Electric Company is a trusted local electrical contractor serving Fort Lauderdale, FL, and the surrounding areas. We specialize in comprehensive electrical inspections and diagnostics, a criti...

Hot Shot Electric

Hot Shot Electric

★★★★★ 5.0 / 5 (2)
398 E Dania Beach Blvd Ste 231, Dania Beach FL 33004
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Hot Shot Electric is a family-owned and operated electrical service based in Dania Beach, FL, founded by owner Greg in 1999. With over 21 years of experience as a licensed electrician, Greg personally...

DB LED Solutions

DB LED Solutions

2703 NW 29th Ter, Oakland Park FL 33311
Lighting Fixtures & Equipment, Electricians, Home Energy Auditors

DB LED Solutions is a locally owned and operated provider of complete electrical and lighting services in Oakland Park, FL. Founded with a focus on manufacturing, we evolved to address a common indust...

Margate Electrical

Margate Electrical

Margate FL 33063
Electricians, Security Systems, Lighting Fixtures & Equipment

Margate Electrical is a trusted, locally-owned electrical contractor serving Margate, FL, and the surrounding communities. With 15 years of hands-on experience, we are a fully licensed and insured tea...

Florida Electricians

Florida Electricians

★★☆☆☆ 2.0 / 5 (8)
1441 W Cypress Creek Rd Ste 300, Fort Lauderdale FL 33309
Electricians

Florida Electricians has been a trusted electrical service provider in South Florida for over three decades. Founded by Ross, the company brings extensive experience to every job, from routine install...



Estimated Electrical Service Costs in Broadview Park, FL

Emergency After-Hours CallEstimated Range
$244 - $329
Electrical Safety InspectionEstimated Range
$104 - $149
EV Charger InstallationEstimated Range
$714 - $959
Panel Upgrade (200 Amp)Estimated Range
$2,409 - $3,219
Ceiling Fan InstallationEstimated Range
$209 - $289

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Broadview Park. Prices include standard parts and labor adjusted for 2026 economic projections.

Frequently Asked Questions

We live on the flat coastal plain near the Broadview Park Library. Could the soil here affect my home's electrical grounding?

The sandy, flat coastal plain soil common in this area can significantly impact grounding effectiveness. Sandy soil has higher electrical resistance, which can compromise the path for fault currents from your grounding electrode system. This makes proper installation and periodic testing of your ground rods even more important for safety. During our inspections, we often need to drive rods deeper or use multiple rods to achieve the low-resistance ground required by code for reliable surge dissipation and equipment protection.

My Broadview Park home has original 1960s cloth wiring. Why do my lights dim every time the refrigerator or air conditioner kicks on?

Homes in this neighborhood with 66-year-old cloth-jacketed copper wiring are struggling with modern 2026 appliance loads. That wiring was never designed for the simultaneous demands of a central air conditioner, refrigerator, microwave, and home office. The insulation becomes brittle over time and the entire system's capacity is often limited, leading to voltage drops that cause lights to dim. This is a clear sign your electrical infrastructure is overloaded and needs a professional evaluation to prevent overheating.

How should I prepare my home's electrical system for a summer brownout or a rare Florida ice storm?

For summer brownouts, which strain the grid during AC peak season, consider installing a hardwired standby generator with an automatic transfer switch. This provides seamless backup power. For surge protection year-round, a whole-house SPD is essential. In the event of a rare ice storm or prolonged outage, ensure you have flashlights and battery backups for critical devices, and never run a portable generator indoors or in an attached garage due to carbon monoxide risk.

My smart TV and modem keep getting fried during storms. Is this a problem with Florida Power & Light or my house?

While FPL manages the grid, the high risk of lightning surges in our region means your home's internal protection is critical. A utility-side surge can travel into your home, and standard power strips offer no real defense. To protect modern smart home electronics, you need a whole-house surge protective device (SPD) installed at your main electrical panel. This device, required by the current NEC, acts as a first line of defense, clamping dangerous voltage spikes before they reach your expensive devices.

My power comes from an overhead line on a mast. What are the common issues with this setup in a suburban neighborhood like ours?

Overhead service masts, common in Broadview Park's suburban homes, are exposed to Florida's weather. The mast head or weatherhead can degrade, allowing rain to seep into the service entrance cables. High winds can also cause tree limbs to abrade or damage the overhead drop from the utility pole. We inspect for proper mast height, secure attachment, and intact conduit seals to prevent water intrusion, which is a frequent cause of main panel corrosion and intermittent power issues.

I want to upgrade my electrical panel. What permits are needed from Broward County, and do you handle that?

A panel upgrade or replacement always requires a permit from the Broward County Building Code Services Division. The work must comply with the 2023 National Electrical Code (NEC) and be performed by a contractor licensed by the Florida Department of Business and Professional Regulation. As the master electrician on the job, I pull all required permits, schedule the inspections, and ensure the installation meets the latest safety standards. Handling this red tape is a core part of our service, guaranteeing your project is legal, safe, and insurable.

I have an old 100-amp panel and want to add a Level 2 EV charger. Is my 1960s-era Broadview Park home's electrical system safe for this upgrade?

A home with a 100-amp service from the 1960s cannot safely support a Level 2 EV charger or a modern heat pump without a significant upgrade. The math simply doesn't work for the sustained 30-50 amp draw of a charger on top of your existing AC and appliance loads. Furthermore, we frequently find these older panels are the recalled and dangerous Federal Pacific brand, which must be replaced before any new circuits are added. A full service upgrade to 200 amps is the necessary, code-compliant starting point.

My power went out and I smell something burning near my panel. How fast can an electrician get to my house in Broadview Park?

For an emergency like a burning smell, our dispatch treats it as a top priority. We can typically be en route from the Broadview Park Library area within minutes, using I-595 for a 5-10 minute response to most homes in the community. Please turn off the main breaker at your panel if it is safe to do so and evacuate the immediate area until we arrive, as this indicates a potential fire hazard that requires immediate diagnosis.

Scroll to Top
CALL US NOW