Top Emergency Electricians in Denver, CO, 80014 | Compare & Call

There are 233 electrician companies server in Denver CO

Altitude Electric

Altitude Electric

★★★★☆ 4.2 / 5 (15)
19336 Goddard Ranch Ct Ste 100, Morrison CO 80465
Electricians

Altitude Electric, based in Morrison, CO, is a trusted electrical contractor serving the Denver Foothills since 2005. Founded by Master Electrician Todd, who brings nearly 25 years of experience, the ...

Mile High Electric

Mile High Electric

★★★★☆ 3.9 / 5 (7)
Denver CO 80205
Electricians

Mile High Electric is a licensed and bonded electrical contracting business, established in 2009 and proudly operating as a Women Business Enterprise (M/WBE). Founded by a Master Electrician with over...

AC Electrical Contractors

AC Electrical Contractors

★★★★★ 5.0 / 5 (6)
Denver CO 80220
Electricians, EV Charging Stations

AC Electrical Contractors is a locally owned and operated Denver electrical company founded in 2013. We are a team of licensed electricians providing reliable residential and commercial services, from...

Summit Heating A/C Plumbing & Electric

Summit Heating A/C Plumbing & Electric

★★★★★ 4.5 / 5 (435)
8091 Shaffer Pkwy Ste C, Littleton CO 80127
Heating & Air Conditioning/HVAC, Plumbing, Electricians

Summit Heating A/C Plumbing & Electric is a Littleton-based home services company founded in 1998 by Bill Leech and Dean Peterson. With Bill's extensive background starting in 1980—spanning custom duc...

Save Home Heat

Save Home Heat

★★★★☆ 4.1 / 5 (98)
5741 Arapahoe Ave Ste 4, Boulder CO 80303
Heating & Air Conditioning/HVAC, Electricians, Plumbing

Since 1979, Save Home Heat Company has built its reputation in Boulder and the Denver area on a foundation of integrity and consistent, high-quality workmanship. As a family-owned and operated busines...

Phoenix Electric

Phoenix Electric

★★★★★ 5.0 / 5 (5)
41521 County Rd 17/21, Elizabeth CO 80107
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Phoenix Electric is your local, licensed electrical expert serving Elizabeth, CO, and the surrounding Front Range counties. As a certified GENERAC dealer and service provider, we specialize in whole-h...

Copper Rose Electric

Copper Rose Electric

★★★★★ 5.0 / 5 (23)
Denver CO 80211
Electricians, Hot Tub & Pool

Copper Rose Electric is your trusted Denver electrical service, handling everything from routine inspections to smart-home integrations and custom lighting builds. We specialize in solving the specifi...

Kell*Star Electric LLC

Kell*Star Electric LLC

★★★★★ 5.0 / 5 (7)
Aurora CO 80014
Electricians

With 28 years of experience serving Colorado homes, Kell*Star Electric LLC is a fully licensed and insured electrical contractor based in Aurora. We operate with a small, highly skilled team dedicated...

Wands and Hammers Tech

Wands and Hammers Tech

1580 N Logan St, Denver CO 80203
TV Mounting, Electricians, Handyman

For nearly 15 years, Wands and Hammers Tech has been Denver's go-to for making homes and offices work better. We blend deep technical skill with a friendly, practical approach. As a seasoned general c...

Quinlan Electric

Quinlan Electric

Denver CO 80209
Electricians, Lighting Fixtures & Equipment

Hi, I'm an electrician from Ireland who made the move to Denver last year. With over seven years of specialized experience in residential electrical work, I bring a practical and safety-focused approa...



Estimated Electrical Service Costs in Denver, CO

Emergency After-Hours CallEstimated Range
$274 - $369
Electrical Safety InspectionEstimated Range
$119 - $164
EV Charger InstallationEstimated Range
$804 - $1,079
Panel Upgrade (200 Amp)Estimated Range
$2,719 - $3,634
Ceiling Fan InstallationEstimated Range
$239 - $324

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Denver. Prices include standard parts and labor adjusted for 2026 economic projections.

Questions and Answers

My smart devices keep resetting after lightning storms—is this an Xcel Energy grid problem?

Frequent lightning on the high plains makes Denver's grid, managed by Xcel Energy, prone to voltage surges. These micro-surges often don't trip breakers but can degrade or reset sensitive electronics like smart thermostats and routers. The issue usually originates outside your home. Installing a whole-house surge protector at your main panel is the most effective defense, clamping these transient spikes before they reach your valuable devices.

Why do the lights dim in my Highland home when the microwave and AC run at the same time?

Your 54-year-old electrical system is struggling. Homes built in 1972, like many in Highland, used NM-B Romex for a standard 100-amp panel. This capacity was fine for the era's appliances, but modern 2026 demands from computers, large TVs, and kitchen gadgets easily overload original circuits. The wiring itself is often adequate, but the main panel's limited capacity creates bottlenecks that cause voltage drops, manifesting as dimming lights.

What's involved in upgrading my electrical service if I have overhead lines to my house?

Upgrading an overhead service in an urban area like Highland involves coordination with Xcel Energy. The utility typically owns the lines up to the weatherhead (the mast on your roof). A master electrician handles the internal panel upgrade, installs a new mast and meter socket to current codes, and then coordinates the utility to replace the drop from the pole. This process requires a permit from Denver Community Planning and Development, ensuring the mast can withstand our wind and snow loads.

My power is out and I smell something burning from an outlet—how fast can an electrician get here?

For a burning smell, treat it as an urgent safety issue. From our dispatch point near Union Station, we can typically reach most Highland addresses in 8 to 12 minutes using I-25 for quick north-south access. Please shut off the breaker for that circuit immediately and avoid using the outlet. A prompt response is critical to prevent an electrical fire from starting inside your walls.

Do I really need a permit just to replace my old circuit breaker panel?

Absolutely. In Denver, any panel replacement or upgrade requires a permit from Community Planning and Development and must be performed by an electrician licensed by Colorado DORA. This isn't bureaucracy; it's a vital safety check. The inspection verifies the installation complies with the 2023 NEC, ensuring proper sizing, AFCI protection where required, and safe grounding. Skipping permits risks voiding insurance and leaves potentially dangerous faults undiscovered.

How can I prepare my home's electrical system for a deep winter freeze or a summer brownout?

Winter ice storms and summer AC peaks strain the grid differently. For extreme cold, ensure your heating system's electrical components are serviced and consider a hardwired backup generator for essential circuits. During summer brownouts, a whole-house surge protector is key, as grid fluctuations often cause damaging surges. For both seasons, having a licensed electrician evaluate your service mast, panel connections, and grounding can prevent failures when you need power most.

Is my old 100-amp panel safe for adding an electric vehicle charger or a new heat pump?

It presents significant challenges and likely requires an upgrade. First, many Denver homes from 1972 have Federal Pacific panels, which are a known fire hazard and should be replaced immediately. Second, a 100-amp service is typically insufficient for a Level 2 EV charger or a modern heat pump alongside other household loads. Installing either would usually necessitate a service upgrade to 200 amps, which also provides the opportunity to replace any hazardous equipment with modern, code-compliant breakers.

Does living on the high plains plateau near Union Station affect my home's electrical wiring?

The terrain itself doesn't directly impact in-wall wiring, but it influences external factors. The high, open plateau sees intense lightning, increasing surge risk. Furthermore, the rocky, often dry soil common here can challenge grounding electrode effectiveness, which is your system's critical safety path for fault currents. A professional should periodically test your grounding resistance to ensure it meets NEC standards for this environment.

Scroll to Top
CALL US NOW