Top Emergency Electricians in Chatsworth, CA, 91311 | Compare & Call

There are 227 electrician companies server in Chatsworth CA

RNG Electrical

RNG Electrical

★★★★★ 4.9 / 5 (37)
Glendale CA 91209
Electricians, Lighting Fixtures & Equipment

RNG Electrical in Glendale is a locally owned and operated electrical company with deep roots in the community. Our journey began decades ago, learning the trade from the ground up by working alongsid...

MK Electric

MK Electric

★★★★★ 4.9 / 5 (132)
Porter Ranch CA 91326
Electricians, Lighting Fixtures & Equipment

MK Electric has been a trusted, licensed, and bonded electrical service provider in Porter Ranch for over 15 years. We specialize in both residential and commercial electrical work, from troubleshooti...

Elite Electrical Contractors

Elite Electrical Contractors

★★★★★ 5.0 / 5 (75)
5235 Mission Oaks Blvd Ste 471, Camarillo CA 93012
Electricians, Lighting Fixtures & Equipment, TV Mounting

With nearly two decades of dedicated service, Elite Electrical Contractors has established itself as a trusted name in Ventura County since 2007. Holding a C-10 Electrical Contractor's license, we pro...

Blue Moon Electrical Sherman Oaks

Blue Moon Electrical Sherman Oaks

★★★★★ 5.0 / 5 (4)
San Fernando Valley CA 91423
Electricians

Blue Moon Electrical Sherman Oaks is your local residential electrical specialist in the San Fernando Valley. Our fully trained, registered technicians are equipped to handle everything from routine i...

Go Pro Electric

Go Pro Electric

★★★★★ 4.9 / 5 (110)
6300 Beeman Ave, Los Angeles CA 91606
Electricians, Lighting Fixtures & Equipment

Go Pro Electric is a licensed and bonded electrical service company serving Los Angeles with over 20 years of experience. Our team of electrical contractors and technicians provides comprehensive resi...

Conejo Valley Electric

Conejo Valley Electric

★★★★★ 4.8 / 5 (517)
5158 Clareton Dr Ste 511, Agoura Hills CA 91301
Electricians, Lighting Fixtures & Equipment, Generator Installation/Repair

Conejo Valley Electric is a family-owned electrical service provider serving Agoura Hills and the surrounding Conejo Valley area for over 34 years. Licensed and insured, they specialize in a comprehen...

High Tech Services

High Tech Services

★★★★★ 4.9 / 5 (97)
Northridge CA 91324
Electricians, Heating & Air Conditioning/HVAC

High Tech Services, Inc. is a licensed, bonded, and insured family-owned business serving Northridge and the greater Los Angeles area for over 25 years. As a local, family-operated company, we special...

Zel Electric

Zel Electric

★★★★★ 5.0 / 5 (150)
1434 Duarte Cir, Simi Valley CA 93065
Electricians, Lighting Fixtures & Equipment

Zel Electric has been a trusted electrical service provider in Simi Valley since 2008, with a foundation built on over 15 years of hands-on trade experience. Our certified general electricians are ded...

Kobzon

Kobzon

★★★★★ 4.9 / 5 (62)
14607 Erwin St Unit 106, Los Angeles CA 91411
Handyman, Painters, Electricians

I'm Alex K., owner of Kobzon Construction LLC, and I bring over 15 years of hands-on experience to every home project in Los Angeles. My career started in multi-apartment building construction, where ...

New Quest Electric

New Quest Electric

★★★★★ 4.9 / 5 (253)
4650 Arrow Hwy Unit G6, Montclair CA 91763
Electricians, Lighting Fixtures & Equipment, Solar Installation

New Quest Electric is a C10 licensed electrical contractor serving Montclair and the broader Southern California community. We specialize in main panel upgrades and EV charger installations, while off...



Estimated Electrical Service Costs in Chatsworth, CA

Emergency After-Hours CallEstimated Range
$334 - $449
Electrical Safety InspectionEstimated Range
$149 - $204
EV Charger InstallationEstimated Range
$979 - $1,314
Panel Upgrade (200 Amp)Estimated Range
$3,314 - $4,424
Ceiling Fan InstallationEstimated Range
$294 - $394

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Chatsworth. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

My power comes from an overhead line to a mast on my roof. What are the common maintenance issues I should watch for?

Overhead service masts, common in Chatsworth Lake Manor, are exposed to the elements. Regularly inspect where the mast enters your roof for cracks in the weatherhead sealant, which can lead to water intrusion into your panel. Also, look for sagging or frayed service drop cables from the utility pole. Tree limbs contacting these lines are a fire risk and cause interference. Any work on the mast or service entrance cables requires a permit from LADBS and coordination with LADWP for a temporary disconnect.

I have an old 100-amp Federal Pacific panel. Can I safely add a Level 2 EV charger or a new heat pump to my house?

No, it is not safe to add those major loads to that specific setup. A Federal Pacific panel is a known fire hazard due to breakers that can fail to trip during an overload. Furthermore, a 100-amp service from 1971 lacks the capacity for a 40-50 amp EV charger or a heat pump's dedicated circuit. The required upgrade involves replacing the hazardous panel with a modern, code-compliant unit and likely increasing your service entrance capacity to 200 amps.

We live on a rocky hillside near Stoney Point. Could that be affecting our home's electrical grounding?

Absolutely. Rocky, dry soil presents a high-resistance path to ground, which can compromise your grounding electrode system. This is critical for surge protection and safety—fault current needs a low-resistance path to earth. We often need to drive additional ground rods or install a concrete-encased electrode (Ufer ground) to achieve the NEC-required 25-ohm resistance. Proper grounding is especially important in hillside areas where lightning-induced surges can travel along the terrain.

My power is completely out and I smell burning from my panel. How fast can an electrician get to my home near Stoney Point Park?

For a burning smell, we treat it as a potential fire hazard and dispatch immediately. From our staging area near Stoney Point, we use SR-118 for the fastest route, typically arriving within your 8-12 minute window. The first step is to safely de-energize the affected area at your main disconnect to prevent an arc flash. We then perform a thermal scan and physical inspection of the panel and breakers to locate the source of the overheating.

What permits and codes are involved if I need to replace my electrical panel in Los Angeles?

Panel replacement requires a detailed electrical permit from the Los Angeles Department of Building and Safety (LADBS). The installation must fully comply with the 2023 California Electrical Code, which mandates AFCI protection for most living areas and specific working clearances around the panel. As a CSLB-licensed electrical contractor, I handle the permit application, scheduling inspections, and providing the final certification. This process ensures the work is documented for home insurance and future sales, and most importantly, that it meets current safety standards.

My smart home devices keep resetting. Is this a problem with LADWP's power quality or something in my house?

While LADWP provides stable power, minor grid fluctuations are common. Sensitive electronics like smart home hubs and computers are vulnerable to these micro-surges. Our low lightning risk in Chatsworth means major surges are rare, but daily utility switching can cause issues. The problem often originates inside your home; an outdated panel with poor connections or a lack of whole-house surge protection at the main panel allows these disturbances to damage equipment. Installing a Type 1 or Type 2 surge protective device is a standard recommendation.

My Chatsworth Lake Manor home was built in 1971. Why do my lights dim when the air conditioner and microwave are on at the same time?

Your home's electrical system is now 55 years old, designed for the demands of 1971. The original NM-B Romex wiring and 100-amp service panel were not intended for today's high-draw appliances, such as modern air conditioners, induction cooktops, and multiple large-screen TVs. This leads to voltage drop, causing lights to dim and putting stress on the entire system. Upgrading the service panel and evaluating branch circuit capacity is often the necessary solution for safety and reliability.

How should I prepare my home's electrical system for summer brownouts and the occasional winter freeze?

For summer peaks, ensure your air conditioning condenser's electrical disconnect and wiring are in good condition, as brownouts strain motors. Consider a hard-wired generator interlock kit for essential circuits during extended outages. Winter preparation focuses on protecting outdoor receptacles and irrigation system wiring from our occasional sub-40°F temperatures with proper GFCI protection and in-use covers. A whole-house surge protector also safeguards electronics from voltage spikes when grid power is restored after any outage.

Scroll to Top
CALL US NOW