Top Emergency Electricians in Tempe, AZ, 85008 | Compare & Call

A burning smell requires immediate action to prevent a fire. From our central dispatch point near ASU Gammage Auditorium, we can typically reach Maple-Ash homes in 8-12 minutes via the Loop 202. Turn off power to that circuit at the breaker panel if it is safe to do so and evacuate the area until help arrives. This response priority treats it as the emergency it is.

Overhead service masts, common in established Tempe neighborhoods, are exposed to the elements. High winds can strain connections, and aging mast heads may corrode. The service drop wires from SRP have a specific clearance requirement from roofs and windows. We inspect the mast, weatherhead, and service entrance cables for integrity during any panel upgrade or if you notice damage after a storm.

The flat, sandy terrain of the Tempe basin can challenge grounding electrode systems. Dry, resistive soil may not provide the low-resistance path to earth required by code, especially for older installations. We test ground rod resistance during a service evaluation. Improving the ground might involve driving additional rods or using a chemical ground enhancement material to ensure your safety systems function correctly during a fault.

All panel upgrades require a permit from the City of Tempe Community Development Department. The work must comply with the 2023 NEC and be performed by a contractor licensed by the Arizona Registrar of Contractors. We handle the permit application, scheduling of inspections, and provide you with the final documentation. This process ensures the installation is safe, up to code, and properly recorded for your home's history.

Federal Pacific panels have a well-documented history of failing to trip during overloads, presenting a significant fire hazard. The 100-amp service from 1983 is also undersized for adding a Level 2 EV charger or a heat pump. Both upgrades typically require a new 200-amp panel and service entrance. We recommend replacing the FPE panel immediately for safety, which creates the foundation for the necessary capacity increase.

The Salt River Project (SRP) grid in our desert basin is prone to lightning-induced surges, which can overwhelm basic protection. While the utility manages grid-level issues, protecting your home electronics is your responsibility. A whole-house surge protector installed at your main panel is essential. For critical devices, point-of-use protectors on entertainment and office circuits add a necessary second layer of defense.

Your home's electrical system is now about 43 years old. Original NM-B Romex wiring from that era was not designed for today's simultaneous appliance loads, like multiple computers, large-screen TVs, and high-efficiency HVAC systems. The dimming lights signal voltage drop, a capacity issue at the panel or in branch circuits. An evaluation can determine if you need a panel upgrade or circuit additions to handle modern 2026 demands safely.

Summer brownouts from peak AC demand can stress motors and electronics. A whole-house surge protector safeguards against these voltage fluctuations. For extended outages during rare winter ice storms or monsoon-related failures, a properly installed generator with a transfer switch is the reliable solution. It prevents backfeed hazards to utility workers and allows essential circuits to remain powered.