Top Emergency Electricians in Salome, AZ, 85348 | Compare & Call

There are 216 electrician companies server in Salome AZ

Fortified Solar & Electric

Fortified Solar & Electric

★★★★★ 5.0 / 5 (1)
Grand Canyon AZ 86023
Electricians, Solar Installation

Fortified Solar & Electric is a family-owned and operated business serving Grand Canyon and Northern Arizona. We hold a dual Arizona ROC CR-11 license (#362023) for both commercial and residential wor...

SKS Electric Company

SKS Electric Company

★★★★★ 5.0 / 5 (4)
Kingman AZ 86409
Electricians

SKS Electric Company, owned by David Sanchez, brings over 18 years of dedicated electrical experience to Kingman, AZ, and throughout Mohave County. David's expertise is rooted in a lifelong involvemen...

S & M Electric

S & M Electric

★★★★☆ 4.3 / 5 (13)
3 Kiji Dava Cir Ste B, Prescott AZ 86301
Electricians, Lighting Fixtures & Equipment

S & M Electric is a licensed and bonded electrical contractor serving Prescott and the surrounding communities with over four decades of local experience. Our purpose is to provide superior electrical...

3rd Gen Electric

3rd Gen Electric

★★★★★ 5.0 / 5 (4)
Mayer AZ 86333
Lighting Fixtures & Equipment, Electricians

3rd Gen Electric, LLC is a family-owned electrical service provider based in Mayer, AZ, with over three decades of experience serving both residential and commercial clients throughout the local area....

Crow Springs Electric

Crow Springs Electric

★★★★☆ 4.2 / 5 (5)
Flagstaff AZ 86004
Electricians

Crow Springs Electric is a Flagstaff-based electrical service provider with a foundation of 19 years of hands-on experience in the trade. Founded in late 2024 by an electrician with over a decade of c...

Arizona Lights Electric

Arizona Lights Electric

★★★★★ 5.0 / 5 (3)
Prescott Valley AZ 86314
Electricians

For over four decades, Arizona Lights Electric has been the trusted electrical specialist for Prescott Valley homes and businesses. This family-owned and operated company, with 20 years serving our lo...

Hawkeye Mechanical

Hawkeye Mechanical

Phoenix AZ 85087
Heating & Air Conditioning/HVAC, Plumbing, Electricians

Since 2019, Hawkeye Mechanical has been the trusted, multi-trade solution for homeowners in Phoenix and New River. We bring together expert training in HVAC, electrical, and plumbing to handle a wide ...

CSW Electric

CSW Electric

★★★★★ 5.0 / 5 (1)
Goodyear AZ 85338
Electricians

CSW Electric provides comprehensive electrical services for Goodyear, AZ, and the surrounding 20-mile area. As a licensed local electrician, they specialize in residential and commercial electrical re...

Deluxe Electric

Deluxe Electric

Glendale AZ 85306
Electricians

Deluxe Electric is your trusted local electrical contractor serving Glendale, AZ. We specialize in professional electrical inspections that proactively identify and resolve common local hazards, parti...

Extra Electrical

Extra Electrical

★★★☆☆ 3.4 / 5 (10)
8550 N 91st Ave Bldg C Unit 31, PEORIA AZ 85345
Electricians, Generator Installation/Repair

Founded in 2008, Extra Electrical is a licensed, family-owned electrical contractor serving Peoria, AZ. We provide reliable electrical services for homes and businesses, from complex commercial instal...



Estimated Electrical Service Costs in Salome, AZ

Emergency After-Hours CallEstimated Range
$314 - $429
Electrical Safety InspectionEstimated Range
$139 - $194
EV Charger InstallationEstimated Range
$934 - $1,249
Panel Upgrade (200 Amp)Estimated Range
$3,149 - $4,204
Ceiling Fan InstallationEstimated Range
$279 - $374

Methodology: Estimates are dynamically generated using labor multipliers derived from 2025 BLS OEWS (SOC 47-2111) data for Salome. Prices include standard parts and labor adjusted for 2026 economic projections.

Q&A

Our lights flicker and the Wi-Fi router resets whenever the Arizona Public Service grid seems to hiccup. Are our electronics at risk?

Yes, they are. APS serves a vast, exposed grid, and the high desert basin around Salome sees frequent lightning strikes, which induce powerful surges. Flickering lights indicate unstable voltage, which can slowly degrade motorized appliances and sensitive circuit boards. Installing a whole-house surge protector at your service entrance is no longer optional; it's essential insurance for modern smart home devices against these grid disturbances.

We want to upgrade our panel. What's involved with La Paz County permits and making sure everything is legal?

All panel upgrades require a permit from the La Paz County Community Development Department and a final inspection. As a Master Electrician licensed by the Arizona Registrar of Contractors, I handle the entire process: designing the system to meet NEC 2023 code, pulling the permit, performing the work, and scheduling the inspection. This ensures your system is documented, safe, and insurable, avoiding costly fines or problems when you sell your home.

We're thinking about adding a Level 2 EV charger and a heat pump. Our panel is 150 amps and was installed in 2003. Is that even safe, or do we need an upgrade?

A 150A panel from 2003 often lacks the physical space and amperage margin for those substantial new loads. We must first verify the panel brand isn't a recalled Federal Pacific unit, which would require immediate replacement for safety regardless. Even with a safe panel, a dedicated 50-amp circuit for the EV charger and a 30-amp circuit for the heat pump will likely necessitate a service upgrade to 200 amps and a new panel to handle the cumulative load without overstressing the system.

How should we prepare our Salome home's electrical system for both summer brownouts and the occasional winter ice storm?

For summer peaks, ensure your AC condenser is on a dedicated, properly sized circuit and consider a hard-wired surge protector to guard against brownout-related voltage swings. For winter, where temperatures can dip to 28°F, a standby generator with a proper transfer switch is the most robust solution. This keeps sump pumps, furnaces, and refrigerators running during extended outages, preventing freeze damage and spoilage.

Our lights dim when the AC kicks on, and the microwave trips the kitchen outlet. We're in Salome Townsite and the house was built around 2003. Is the wiring just getting old?

Your home's electrical system is about 23 years old, which is a common point where original NM-B Romex wiring begins to show strain. While the wire insulation is likely sound, the bigger issue is capacity. Homes from that era weren't designed for the simultaneous load of modern appliances, multiple large-screen TVs, and computer equipment. The 150A service panel may be at its limit, causing voltage drops and nuisance trips as it struggles to meet 2026-level demand.

We have overhead lines coming to a mast on our roof. What are the main things we should watch for with that type of service?

Overhead service masts are common here but are vulnerable to monsoons and aging. Inspect the mast for rust or looseness where it enters the roof, and ensure the service entrance cables are intact, without cracks or animal damage. The utility's connection point at the weatherhead should be secure. Any sagging or damage to the overhead drop from the pole is an APS issue, but the mast and everything from the meter down is homeowner responsibility and must be maintained.

We lost all power and there's a burning smell near the panel. How fast can an electrician get to our place in Salome?

For an emergency like that, we dispatch immediately. Starting from the Salome General Store, we're on US-60 and can typically be at your door within 5 to 10 minutes. Our first priority is to make the scene safe by killing power at the meter if necessary, then diagnosing the source—often a failed breaker or overheated connection on the bus bars. Every minute counts to prevent fire damage.

We're near the Salome General Store in this high desert basin. Could the dry, rocky soil be affecting our home's electrical grounding?

Absolutely. Rocky, high-resistivity soil is challenging for establishing a low-resistance ground, which is the foundation of your entire electrical safety system. A poor ground can lead to erratic breaker operation, equipment damage, and increased shock risk. We often need to drive multiple grounding rods or use a ground plate to meet NEC requirements, and we always verify the grounding electrode system's integrity during a service call.

Scroll to Top
CALL US NOW